http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
홍수피해발생 잠재위험도와 기왕최대강수량을 이용한 설계빈도의 연계
박석근(Park Seok Geun),이건행(Lee Keon Haeng),경민수(Kyung Min Soo),김형수(Kim Hung Soo) 대한토목학회 2006 대한토목학회논문집 B Vol.26 No.5B
현재 홍수피해에 대한 잠재성은 홍수피해잠재능(PFD)에 의해 나타내고 있으나 하천유역의 설계빈도와의 연계성이 없어 실무에서 이용하는데 어려움이 있다. 따라서 본 연구에서는 홍수피해발생 잠재위험도라는 개념을 도입하고 그 산정방안을 마련하여 산정된 잠재위험도와 설계빈도와의 연계성을 제시하였다. 홍수피해발생 잠재위험도는 위험성, 노출성, 취약성의 세가지 세부요소로 산정되며, 위험성은 홍수사상의 발생확률, 노출성은 자산 등이 특정 홍수시장 혹은 홍수재해에 노출되어 있는 정도, 취약성은 홍수에 대비한 시설들의 취약 정도를 나타낸다. 이 세부요소들은 또 다시 세세부요소를 가지며 위험성은 지속 기간별 빈도별 확률강우량등으로 표현가능하고, 노출성은 인구밀도와 공시지가, 취약성은 지역낙후도지수와 홍수방어능력지수를 세세부요소로 선정하였다. 홍수피해발생 잠재위험도 산정식의 가중계수를 결정하기 위해서 전문가의 의견을 통한 계층 분석과정(AHP)기법을 이용하였다. 안양천 유역에 대하여 홍수피해발생 잠재위험도를 산정하였고, 잠재위험도와 기왕최대강수량을 이용하여 시ㆍ군ㆍ구 단위로 설계빈도를 산정할 수 있었다. 안양천의 기존 설계빈도는 본류구간에서는 200년, 지류 구간에서는 50년에서 100년사이로 정하고 있으나, 본 연구에서는 안양천유역 전체에 대하여 설계빈도를 약 110년에서 130년정도로 결정하였다. 따라서 본 연구에서 개발한 기법을 이용하여 행정구역단위의 설계빈도를 제시할 수 있었으며, 이는 향후 유역별 및 하천별로도 잠재위험도와 설계빈도를 산정할 수 있을 것으로 사료된다. The Potential Flood Damage (PFD) is widely used for representing the degree of potential of flood damage. However, this cannot be related with the design frequency of river basin and so we have difficulty in the use of water resources field. Therefore, in this study, the concept of Potential Risk for Flood Damage Occurrence (PRFD) was introduced and estimated, which can be related to the design frequency. The PRFD has three important elements of hazard, exposure, and vulnerability. The hazard means a probability of occurrence of flood event, the exposure represents the degree that the property is exposed in the flood hazard, and the vulnerability represents the degree of weakness of the measures for flood prevention. Those elements were devided into some sub-elements. The hazard is explained by the frequency based rainfall, the exposure has two sub-elements which are population density and official land price, and the vulnerability has two sub-elements which are undevelopedness index and ability of flood defence. Each sub-elements are estimated and the estimated values are rearranged in the range of 0 to 100. The Analytic Hierarchy Process (AHP) is also applied to determine weighting coefficients in the equation of PRFD. The PRFD for the Anyang river basin and the design frequency are estimated by using the maximum rainfall. The existing design frequency for Anyang river basin is in the range of 50 to 200. And the design frequency estimation result of PRFD of this study is in the range of 110 to 130. Therefore, the developed method for the estimation of PRFD and the design frequency for the administrative districts are used and the method for the watershed and the river channel are to be applied in the future study.
표면유속을 이용한 하천 유량산정방법의 적용 및 비교 분석
송재현(Jae Hyun Song),박석근(Seok Geun Park),김치영(Chi Young Kim),김형수(Hung Soo Kim) 한국방재안전학회 2023 한국방재안전학회 논문집 Vol.16 No.2
홍수 유량측정은 직접 하천에 접촉하는 방식의 경우 측정인력의 안전 문제와 다수의 인력이 필요한 점 등 어려운 점이 많다. 최근 이러한 문제점을 해결하기 위해 현장에서 측정이 간편하고, 수면에 접촉하지 않는 비접촉방식의 전자파표면유속계 활용이 증가하고 있으나 돌발적이고 급변하는 현장 여건의 적용에 있어 어려움이 있다. 따라서, 홍수 상황에서 표면유속을 이용한 유량산정방법은 이론적이고, 경제적인 접근이 필요하다. 본 연구에서는 전자파표면유속계 측정자료와 수위-유량관계곡선식 자료를 수집하여 표면유속을 이용한 지표유속법과 유속분포법을 적용 및 분석하였다. 전반적으로 동수반경 3 m 이상 또는 평균유속 2 ㎧ 이상에서는 모든 방법이 측정유량 및 환산유량과 유사한 결과로 분석되었다. 그리고 대상지점 중 수위-유량관계곡선식 고수위 범위에서 최대유속 발생 위치 구간의 최대 표면유속을 이용하여 지표유속법과 유속분포법으로 유량을 산정하였고, 환산유량과의 평균 상대오차가 모두 10% 이내로 비교적 일치하였다. 홍수시 한 개의 최대 표면유속 측정과 지표유속법 및 유속분포법을 이용한 유량산정방법은 고수위 외삽 개발에 적용할 경우 외삽추정 구간에 대한 신뢰도를 제고할 수 있을 것으로 판단되었다. 따라서, 본 연구결과를 토대로 한 표면유속을 이용한 유량산정방법은 신속하고 효율적인 홍수 유량측정 방안이 될 것으로 기대된다. There are some difficulties such as safety problem and need of manpower in measuring discharge by submerging the instruments because of many floating debris and very fast flow in the river during the flood season. As an alternative, microwave water surface current meters have been increasingly used these days, which are easy to measure the discharge in the field without contacting the water surface directly. But it is also hard to apply the method in the sudden and rapidly changing field conditions. Therefore, the estimation of the discharge using the surface velocity in flood conditions requires a theoretical and economical approach. In this study, the measurements from microwave water surface current meter and rating curve were collected and then analyzed by the discharge estimation method using the surface velocity. Generally, the measured and converted discharge are analyzed to be similar in all methods at a hydraulic radius of 3 m or over or a mean velocity of 2 ㎧ or more. Besides, the study computed the discharge by the index velocity method and the velocity profile method with the maximum surface velocity in the section where the maximum velocity occurs at the high water level range of the rating curve among the target locations. As a result, the mean relative error with the converted discharge was within 10%. That is, in flood season, the discharge estimation method using one maximum surface velocity measurement, index velocity method, and velocity profile method can be applied to develop high-level extrapolation, therefore, it is judged that the reliability for the range of extrapolation estimation could be improved. Therefore, the discharge estimation method using the surface velocity is expected to become a fast and efficient discharge measurement method during the flood season.