http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
공동주택의 공기환기시스템의 변화에 따른 국소급기지수 특성의 수치적 연구
문종민(Jongmin Moon),리광훈(Gwang Hoon Rhee) 한국실내환경학회 2011 한국실내환경학회지 Vol.8 No.2
Recently, the air pollution have bad effects on the indoor environment. Many buildings around the world use natural ventilation. to remove the air pallutant. But, nowadays, ventilation requirements can be demanding, as modern systems require greatly improved reliability and control. The fan and the duct are used to remove air mechanically from the space. Until now, apartment houses have been relying on the duct supply system ventilation rather than other system ventilations. Therefore, the establishment of a prediction method based on optimal ventilation energy consumption using duct supply system and ductless is the ultimate goal of this study. As a result, this study found that the characteristics of duct and ductless supply system ventilation are dependent to each exhaust system. Consequently, the local supply indices of the duct supply system is definitely superior about 24.6% ~ 26.4 % than those of ductless supply system. However, the duct supply system has greater pressure drop in ventilation area than ductless, and duct system needs a lot of ventilation energy. In this study, The ductless supply system has advantage over the duct system about 14.8 % as duct exhaust system and 20.0% as ductless exhaust system in terms of modified local supply indices.
문종민(Jongmin Moon),안윤주(Youn-Joo An) 대한환경공학회 2016 대한환경공학회지 Vol.38 No.7
최근 나노물질의 산업 및 생활분야의 광범위한 사용으로 인한 나노안전성이 대두되고 있다. 특히 다양한 목적에 의해 가공된 나노물질의 잠재적 독성이 문제가 되고 있기 때문에, 지속가능한 나노물질 산업의 발전을 위해서는 적극적인 나노 안전성에 대한 연구가 진행되어야 한다. 현재까지 나노물질의 일반적 급성, 만성독성에 대한 연구는 비교적 활발하게 진행되고 있지만, 나노물질의 다세대 영향에 대한 연구는 시간적 및 실험적 제약으로 인해 미흡한 실정이다. 생태계 내 나노물질의 다세대 연구는 일반적 독성 종말점을 이용한 후세대 영향 연구와 나노물질의 세대 간 거동을 확인한 세대전이 연구로 나뉘어 진행되고 있다. 본 연구는 나노물질의 다세대 영향 및 전이연구 추세를 확인하고 제한점을 제시하여 앞으로의 연구방향을 제시하는데 그 목적이 있다. 나노물질에 대한 학술연구를 대상으로 문헌조사를 실시하였으며, 각 분야별 자료를 수집하고 비교분석하였다. 조사결과 후세대 영향을 확인한 연구는 총 13건 이었으며, 생존률, 생식률 그리고 운동성과 같은 지표를 이용하여 다음세대에 전달되는 영향을 확인하였다. 그리고, 7건의 세대전이 연구에서는 후세대로 전달된 나노물질을 다양한 이미징 기법을 통하여 확인하였다. 현재까지 나노물질이 후세대에 미치는 독성영향의 메커니즘은 밝혀진 바가 거의 없다. 본 연구에서는 나노물질의 다세대 연구추세를 분석하고, 후세대영향과 세대전이의 상호보완적 연구방향을 제시하였다. Nano-saftey has become an emerging issue recently, because of the broad use of nanomaterials in nano-industries and commercial areas. For a sustainable development in the nano-industry, active studies on nano-safety should be executed, especially on the potential risks in engineered nanomaterials (ENMs). Although acute and chronic assessments of nanomaterials have been extensively studied in many studies, multigenerational studies are very scarce. Overall, multigenerational studies have progressed as two different trends, studying post-generational effects or trans-generation effects. This study intended to suggest further nanosafety studies based on the trends and limitations of current ones. Through a comparative analysis, we investigated peer-reviewed multigenerational studies that used nanomaterials. Thirteen studies on post-generation effects confirmed generational nano-toxicity via several bioassays, such as mortality, fertility, and behavioral assays. Seven studies on trans-generation effects demonstrated nanomaterial pathways to next generations, using imaging techniques. Until now, mechanisms for post-generational nano-toxicity has been rarely proposed. Thus, we propose that complementary studies on such mechanisms are imperative for future studies.
화재시 대비 반횡류식 터널의 댐퍼 개방율에 따른 국소배기지수의 변화에 대한 수치해석 연구
문종민(Jongmin Moon),리광훈(Gwang Hoon Rhee) 대한기계학회 2011 대한기계학회 춘추학술대회 Vol.2011 No.4
터널은 반 밀폐구조이기 때문에 보통 급기식으로 환기 시스템을 운용한다. 하지만, 터널 내 사고로 인한 화재 발생시에는 배기식으로 환기 시스템을 전환한다. 이는 화재로 인한 유독가스의 배출을 용이하게 한다. 반횡류식 터널의 경우 풍도를 이용하여 많은 양의 공기의 수송이 가능하며, 터널의 길이에 따라 댐퍼의 개방율을 조정하여 터널 내로 수송되는 풍량을 제어한다. 본 연구에서는 반횡류식 터널로 서울시 외곽순환도로에 위치한 홍지문 터널의 실제 형상을 모사하였다. 이는 전산유체역학을 이용하여 댐퍼 개방율 변화에 따른 최적화된 환기량 분포를 예측하고, 국소배기지수를 증가시키는 데에 그 목적이 있으며, 그 결과에 따라 화재 시뮬레이션을 통하여 제연되는 과정을 모사하였다. The tunnel has semi sealed constitution, therefore the ventilation system is usually worked as air supply mode into the car tunnel. But the ventilation system is changed aπ exhaust mode only if the fire and smoke is occurred in car tunnel. And the exhaust mode of semi-transverse tunnel could easy to emit the pollutant into the flow tunnel located upper the car tunnel. The semi-transverse tunnel could transport a lot of air flow rate using flow tunnel, and to control the damper open rate, thereby flow rate is adjusted by supply mode or exhaust mode following any situation. In this study is descritizated the Hongjimun tunnel at its actual model to search the optimal the flow rate variation depending on damper open rate and to increase the local exhaust index in the tunnel. And the fie and smoke simulation is shown the processing of exhaust smoke from point of ignition to flow tunnel.
대형 공장 개구부용 에어커튼의 설계 인자에 따른 차단 성능 변화에 대한 전산해석 연구
문종민(Jongmin Moon),리광훈(Gwang Hoon Rhee) 대한기계학회 2015 大韓機械學會論文集B Vol.39 No.8
작업의 효율을 높이기 위해서 대형 공장에서 개구부는 주로 개방 되어 있다. 그러나 동절기에 공장에서 난방을 하는 경우 개방되어 있는 개구부는 난방부하를 상승시키는 큰 요인이다. 때문에 공장에서는 개구부 상단에 에어커튼을 설치하여 외부의 침기를 막아 난방부하를 낮춘다. 일반적인 에어커튼의 설계 변수로는 토출 각도와, 속도, 온도 등이 존재하며 이에 대한 연구는 이미 많이 진행되었다. 하지만, 공장이라는 공간적 특수성을 고려하였을 때, 기존에 연구되지 않은 개구부로부터의 이격 거리와 토출구 폭에 대한 부분도 차단 성능에 영향을 미친다. 그 결과 에어커튼은 이격 거리가 가깝고, 토출구 폭은 넓을수록 차단 성능이 좋았다. 이격 거리가 존재하더라도 토출구 폭을 증가시키면 차단 성능이 향상되었으며, 토출구 폭을 증가시킴으로써 약 13.7%의 차단 성능의 향상을 기대할 수 있다. In large-scale factories, there are usually openings in the building to increase the efficiency of workers. However, if the factory is heated during winter, openings significantly increase the heating load. Therefore, there is a need for air curtains to be installed at the top of openings in factories to reduce the heating load due to the cold air entering from outside. The main design variables of these air curtains are the discharge angle, speed, and temperature, etc. While there have already been many studies focusing on these design variables, the distance from the opening and the width of the discharge have not been studied even though they also affect the sealing performance. As a result, when the distance from the opening decreases and the width of the discharge increases, we realize an optimum air curtain performance. However, if the distance from the opening is about 1.5 m, by adjusting the discharge angle and the distance from the opening, the sealing performance of the air curtain is improved by 13.7%.