http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
노상수,김동현,정귀상,김형표,김광호 한국센서학회 2002 센서학회지 Vol.11 No.6
본 논문에서는 백금박막 온도센서의 0℃, 100Ω 세팅을 위해 355nm 파장을 갖는 자외선 레이져를 이용하였다. 국제적으로 온도센서의 A-class 기준오차는 0℃에서 ±0.06Ω 이다. 실제적으로 이 값은 0.15℃ 이하에 해당하는 오차로 저항체 제작시 고정밀 가공 기술을 필요로 한다. 가공에 이용된 355nm DYP(Diode-Pumped YAG) 레이져는 power : 37mW, rep, rate 주파수; 200Hz 그리고 bite size : 7.5㎛에서 1~l.5㎛ 두께의 백금박막을 가장 안전하게 가공할 수 있었으며 가공선폭은 10㎛ 안팍임을 확인하였다. 그리고 사진식각 공정기술을 이용하여 제작된 2″x 2″기판내의 96개(4 by 24) 저항체는 상온 25℃에서 79~90Ω : 42.7%, 91~102Ω : 57.3%의비율로 각각 제작되어졌다. 109.73Ω를 목표값으로 25℃에서 자외선 레이저를 이용하여 가공한 결과 82.3%가 가공오차가 ±0.03Ω이하에 들어왔으며 나머지 17.7%도 국제규격 A-Class내인 ±0.06Ω내에 포함되었다. In this paper, we used U.V.(wavelength, 355nm) laser for adjusting Pt thin films temperature sensor to 100Ω at 0℃. Internationally, A-class tolerance of temperature sensor is ±0.06Ω at 0℃. This is under value of 0.15℃, actually, so high-fine trimming technology is essential to this process. The width of trimmed lines was about 10㎛ and the best trimming of Pt thin films of 1~1.5㎛ was carried out with power : 35mW, rep. rate frequency : 200Hz and bite size : 1.5㎛ . And using photolithography process, 96 resistors were fabricated in 2″x 2″substrate as the proportion of 79~90Ωand 91~102Ω is 42.7% and 57.3%, respectively. As result of trimming resistors to the target value of 109.73Ω at 25℃, 82.3% of resistors had the tolerance within ±0.03Ω and the others(17.7%) were within ±0.06Ω of A-class tolerance.