http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
폐플라스틱의 열분해에 의한 대체 오일 생산의 신기술 개발
이경환,노남선,신대현,Lee Kyong-Hwan,Roh Nam-Sun,Shin Dae-Hyun 한국자원리싸이클링학회 2006 資源 리싸이클링 Vol.15 No.1
대량 발생되어 환경 문제를 유발하는 폐플라스틱의 처리방법으로 열분해에 의한 대체 연료유 생산 기술이 부각되고 있다. 본 연구에서는 국내 폐플라스틱의 발생 현황, 국내외 유화 기술 현황, 유화의 기본적인 공정 기술과 문제점, 그리고 한국에너지기술연구원에서 개발된 유화의 신기술을 소개하였다. 이 공정의 특징은 열가소성 폐플라스틱이 혼합된 원료에 대해 공정 운전의 자동화에 의한 연속 운전이 가능하고, 반응 공정이 무촉매이지만 왁스 생성을 최소화한 순환식 분해 반응 공정이며, 또한 생성 가스의 재 사용과 슬러지로 부터 오일 회수에 의한 배출 산사물의 양을 줄이는 등의 특징을 가진 경제적, 환경적으로 많은 장점을 가지고 있다. 연간 300톤 규모의 파이롯트 플랜트 실험 결과는 정상 운전이 3일 이상의 연속 운전에 의해 오일 수율을 $81\%$ 정도 얻었다. 증류탑 상단과 하단에서 얻은 생성유는 각각 가솔린과 디젤인 경유보다 조금 높은 끊는점 분포를 보였다. For treating a huge amount of plastic waste with the environment problem, pyrolysis of plastic waste into alternative fuel oil is one or important issue in recycling methods. This study was introduced over the trend or generation of plastic waste, in Korea pyrolysis technology in domestic and foreign countries, basic technology in pyrolysis process and new technology of pyrolysis developed in KIER (Korea Institute of Energy research). The characteristics of process developed in KIER are the continuous loading treatment or mixed plastic waste with an automatic control system, the minimization of wax production by circulation pyrolysis system in non-catalytic reactor, the reuse of gas produced and the oil recovery from sludge generated in pyrolysis plant, which have greatly the advantage economically and environmetally. The experiment result data in 300 ton/yr pilot plant showed about $81\;wt\%$ liquid yield for 3 days continuous reaction time, and also the boiling point distribution of light oil (LO) and heavy oil (HO) produced in distillation tower was a little higher than that of commercial gasoline and diesel, respectively.
PVC 함유 폐합성수지의 열분해에서 염소성분의 거동 특성
신대현(Dae-Hyun Shin),노남선(Nam-Sun Roh),이경환(Kyong-Hwan Lee),김광호(Kwang-Ho Kim),전상구(Sang-Gu Jeon) 한국열환경공학회 2009 한국열환경공학회 학술대회지 Vol.2009 No.춘계
It is well-known that PVC s contained in wastes is a troublesome matter in the processes of incineration and recycling etc. because of Cl component giving serious pollutants such HCl gas, dioxin etc. In pyrolysis process, it also causes the problems of corrosion, emission of HCl/dioxin through flue gas, as well as Cl content in oil products In this study, TG analysis and basic pyrolysis experiments were carried out with pure PVC and PVC-based wastes at various temperatures ranges. The tests results were discussed related to pyrolysis processes and the results in a commercial plant were discussed together
최연석(Choi, Yeon-Seok),김병길(Kim, Byung-Gil),노남선(Roh, Nam-Sun) 한국신재생에너지학회 2009 한국신재생에너지학회 학술대회논문집 Vol.2009 No.06
A commercial-scale RDF boiler that its burning capacity is 400 kg-RDF/hr and steam production capacity is 2 ton/hr. It has a chain type stoker and waste heat recovery system. Heat exchanger is vertical water-pipe so that soot blowing and removal is convenient during operation. Dry scrubber, bag filter and activated carbon tower have been installed for the reduction of air pollutant gases and dust. Analysing data of pollutants from stack such as SO_x. NO_x and dioxin shows so good results that the boiler system could comply the regulated emission limits.