http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
심층포기장치(深層暴氣裝置)에 있어서 기포(氣泡)의 형태(形態)와 거동(擧動)
김환기,양봉용,Kim, Whan Ki,Yang, Bong Yong 대한토목학회 1989 대한토목학회논문집 Vol.9 No.4
깊이 32m인 심층포기장치에서 기포(氣泡)의 형태(形態)와 거동(擧動)에 관하여 실험연구(實驗硏究)를 실시하였다. 연구(硏究) 결과(結果)에 의하면, 심층포기장치의 하향관(下向管)에 설치된 0.06cm의 단일(單一) 오리피스경(經)에서 발생되는 기포(氣泡)의 구체적(球體積) 상당경(相當經)(Dv)은 0.422-0.722cm이고 기포(氣泡)의 형상(形狀)은 타원체(?圓體)이었다. 기포(氣泡) 체류량(滯留量) 기(氣)-액(液) 접촉면적(接觸面積)은 심층포기장치의 수심(水深) 증가(增加)할수록 감소(減少)하였으며, 기포(氣泡)의 하강속도(下降速度)는 액체(液體)의 순환(循環)유속보다 작고, 기포(氣泡)의 상승속도(上昇速度)는 액체(液體)의 순환(循環)유속보다 약간 크게 나타났다. 심층포기장치내의 기포분포(氣泡分布)는 거의 대수정정규분포(代數定定規分布)를 나타내고 있으며, 또한 기포(氣泡)의 갯수는 수심(水深)이 증가(增加)할수록 감소(減少)하며, 하향관(下向管)이 상향관(上向管)에 비하여 많았다. The experimental study on the shape and behavior of bubbles in U-tube deep shaft of 32m has been performed. According to the results in this paper, the equivalent spherical diameter of bubbles was 0.422-0.722cm and the shape of bubbles was almost ellipsoidal for bubbles to be generated ta single-orifice of diameter 0.06cm in the downcomer of the deep shaft system. Gas hold-up and gas-liquid contact area of bubbles in the deep shaft was decreased in accordance with depth, Also downcomer velocity of bubbles was slower than circulation velocity of liquid and riser velocity of bubbles was fast than circulation velocity. The bubble-size-distribution of bubbles in the deep shaft was the logarithmic probability distribution. The number of bubbles in the deep shaft was decreased in accordance with depth and the number of bubbles in the downcomer is more than the bubbles in the riser.
상호에스테르 교환반응이 폴리(에틸렌 테레프탈레이트)/폴리(에틸렌 나프탈레이트) 블렌드 유연기판 특성에 미치는 영향
김재현(Jae Hyun Kim),김환기(Whan Ki Kim),염주선(Ju Sun Yum),강호종(Ho Jong Kang) 한국고분자학회 2011 폴리머 Vol.35 No.3
PET/PEN 블렌딩에 의하여 발현되는 형태학적 변화가 PET/PEN 블렌드 유연기판 특성에 미치는 영향을 살펴보았다. PET와 PEN의 용융 블렌딩에 따른 two phase 형태학적 변화는 블렌드의 유연기판으로서의 치수안정성을 증가시킴을 알 수 있었다. PET/PEN 필름의 가공조건에 따른 상호에스테르 교환반응은 블렌드의 two phase 형태와 결정화도를 변화시키며 이러한 거시적 형태학적 변화는 유연기판으로서의 PET/PEN 필름의 치수안정성에 영향을 미침을 확인하였다. 결정화도가 높을수록 상호에스테르 교환반응이 낮을수록 PET/PEN 블렌드 필름의 치수안정성이 우수해짐을 알 수 있었다. The effect of morphological development in PET/PEN blending on the physical properties of PET/PEN blend film as a flexible substrate was investigated. The two phase morphology was obtained in PET/PEN blends and it caused the improvement of dimensional stability of PET/PEN blend as a flexible substrate. The two phase morphology and crystallinity of PET/PEN blends could be controlled by the transesterification between PET and PEN during the film processing and this macroscopic structural development affected the dimensional stability of PET/PEN blend films. Better dimensional stability was obtained with increasing crystallinity and decreasing the level of transesterification.