http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
UHF RFID를 이용한 위치정보 기반 건축자재 관리 시스템
김태윤,황석승,Kim, Tae-Yun,Hwang, Suk-Seung 한국전자통신학회 2015 한국전자통신학회 논문지 Vol.10 No.9
RFID(Radio Frequency Identification)는 라디오파를 이용하여 사물에 부착된 태그에 저장되어 있는 고유정보를 무선으로 전송하는 기술이다. 건축 분야에서 RFID를 사용하여 자재의 투입량과 재고 관리를 위한 자재관리 시스템의 구축사례가 증가 하고 있는 추세이다. 기존의 자재관리 시스템은 자재의 투입량과 재고 관리를 위해 자재에 RFID태그를 부착시키고 자재 투입 시 자재에 부착된 태그를 인식하는 기능만을 가진 시스템이 대부분이고, 자재의 재사용을 위해 자재의 위치정보를 RFID를 활용하여 자동으로 인식하고 관리할 수 있는 시스템 개발은 활발히 이루어지고 있지 않다. 본 논문에서는 건축자재의 효율적인 재사용을 위해 특정 서브와 리더기의 거리측정값을 기반으로 자재의 위치를 추정하여 메인 서버에 저장하는 기능을 가지는 RFID 시스템을 제안한다. 시스템의 구조는 RFID 리더부, 거리측정부, 통신부, 저장부로 구성된다. Using the radio wave, RFID(: Radio Frequency IDentification) wirelessly transmits the unique information saved in a tag attached on the specific object. In the construction area, the trend in using RFID for managing the input and inventory of the construction materials is upward. General management systems for the construction materials have only a function of identifying the tag attached on the construction materials, but the management system with a function of identifying and managing the location information of the construction materials employing RFID, for reusing it, is not actively developed. For the efficient reuse of the construction materials, in this paper, we propose the RFID system with a function of estimating and saving the location information of the specific construction materials, based on the estimated distances between the particular subs and reader. The proposed system consists of RFID reader, distance estimate, communication, and memory units.
김태윤,황석승,Kim, Tae-Yun,Hwang, Suk-Seung 한국전자통신학회 2014 한국전자통신학회 논문지 Vol.9 No.8
차량 운행 시 주의분산으로 인한 자동차 사고가 증가 하고 있는데, 주의분산 행동은 전방 주시율, 차로유지능력, 위험상황별 반응시간의 세 가지 항목에 대해 영향을 미친다. 많은 운전자들이 운행 중 라디오를 청취하게 되는데, 지역의 경계를 넘어가는 경우 특정 방송국의 라디오를 계속 청취하기 위해 라디오의 주파수를 변경하여야 한다. 이 과정에서 운전자의 주의분산이 발생하여 교통사고 발생 가능성이 높아지게 된다. 특히 고속도로에서는 빠른 속도로 차량이 주행하므로 사고의 위험이 더욱 높아지게 된다. 차량 운행 시 라디오 조작으로 인한 사고의 위험성을 줄이기 위해 본 논문에서는 각 방송국의 표준 라디오 주파수를 데이터베이스(D/B : date base)에 저장하고, 특정 지역의 경계에서 내비게이션으로부터 얻은 차량의 위치정보를 이용하여 변경된 지역의 라디오 주파수를 결정한 후, 기존의 주파수와 새로운 주파수를 이용하는 신호 중 수신율이 양호한 주파수를 선택하는 알고리즘을 제안한다. 양호한 수신율을 가지는 주파수를 선택하기 위해 두 주파수에 대한 신호의 신호-대-잡음비(SNR : signal-to-noise ratio)를 기준으로 사용한다. Traffic accidents caused by the attention dispersion are increasing and the behavior of the attention dispersion affects the front-observing rate, road keeping ability, and reaction time for a dangerous situation. Many drivers listen to a radio broadcast and they have to change the frequency for continuously listening a radio broadcast of the specific broadcasting station in case of crossing a boundary of the particular area. In this situation, the possibility of a car accident increases, because the attention dispersion of a driver might be occurred. Especially, the risk of a car accident caused by changing the frequency of a radio is more serious in the highway, due to the high speed of a vehicle. In order to reduce the risk of a car accident caused by handling a radio during driving car, in this paper, we propose an automatic frequency conversion algorithm for vehicle radio, which saves normal system frequencies of primary broadcasting stations in a database and determines new frequency of the changed area using the location information obtained from a navigation system in a boundary of the specific area. After determining new frequency, the proposed algorithm selects a frequency with better receiving rate comparing signal-to-noise ratios (SNRs) of two signals corresponding previous and new frequencies.
김태윤,장재웅,장경덕,문귀원,Kim, Tae-Yun,Jang, Jae-Ung,Jang, Gyeong-Deok,Mun, Gwi-Won 한국천문학회 2012 天文學會報 Vol.37 No.2
전자파설계는 위성의 전력시스템, 통신시스템 뿐만 아니라 구조체 등 위성시스템 전반에 걸쳐서 종합적으로 고려가 되어야 하며, 이를 위해서는 개발 초기단계에서부터 시스템 설계에 반영되어야 한다. 위성시스템의 상세 설계가 끝난 후에는 시스템에 구현된 전자파 설계의 적합성을 검증하여야 하며 이는 해석 및 시험을 통해 이루어진다. 본 논문에서는 저궤도 중형급 위성이 우주환경에서 전자파적합성을 이루기 위한 설계 기법 및 전자파환경에 대한 적합성 검증과정에 대해서 다루고 있다. 저궤도 중형급 위성시스템에 대하여 구조물의 전자기적 특성을 정의하는 것부터 우주환경에서 위성의 RF호환성에 이르기까지 부품단위에서부터 시스템 수준까지의 전자파 설계 기준과 각 단계별로 전자파적합성을 검증하기 위한 방법 및 절차에 대해서 기술한다.