http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
김태우(T.W.Kim),진기호(K.H.Chin),강안종(A.J.Kang),김학성(H.S.Kim) 전력전자학회 2003 전력전자학술대회 논문집 Vol.2003 No.7(1)
This paper proposes a novel ZVZCS-PWM Boost Converter, It enables the main switch to be turned on and off with both zero voltage and zero current and the auxiliary switch to be turned on and off with ZCS, the rectify diode to be turned on and off with ZVS Moreover, This converter is suitable for not only minority carrier device but also majority carrier device, The auxiliary resonant circuit of the proposed boost converter is placed out the main power path, therefore, there are no voltage/current stresses on the main switch and diode, The operation of the proposed boost converter is explained and analyzed theoretical and experimentally, from a prototype operating at 100kHz, with an input voltage rated at 50V
Structure Analysis for an AVLB (Armored Vehicles Launched Bridge)’s Reservoir Using Design Parameter
T. W. Kim(김태우),I. H. Park(박일환),A. R. Go(고아라),S. J. Nam(남석주),D. S. Hong(홍대선) Korean Society for Precision Engineering 2021 한국정밀공학회 학술발표대회 논문집 Vol.2021 No.11월
An AVLB (Armored Vehicles Launched Bridge) is known as one of the strategic munitions used by the Korean Army Corps of Engineers. An AVLB is a military vehicle that act as a temporary bridge in which five large hydraulic cylinders are simultaneously operated. In order to stably operate the hydraulic cylinder, a reservoir containing hydraulic fluid with stable performance is required. Currently, supply of such reservoirs relies on entirely imports from foreign countries, however its localization development has not been achieved yet. In this study, the initial model of the reservoir is reversely designed, and then structural stability is analyzed. Through structural analysis using ANSYS for the initial model, the stress concentration in the reservoir is analyzed and compared with the previously known damaged parts of the actual reservoir. To reduce the stress concentration, a series of simulations are carried out for a set of parameters, which are to be empirically determined within a practical design range. Finally, the parameters guaranteeing a stable structure are found from the simulation, and are reflected to the modified design of the product.
유연촉각 센서의 열 경화 조건을 고려한 레이저 소착에 의한 노이즈 저감
김태우(T. Kim),이인환(I. H. Lee),최재원(J. W. Choi),김호찬(H. C. Kim) Korean Society for Precision Engineering 2021 한국정밀공학회 학술발표대회 논문집 Vol.2021 No.11월
최근 산업에 로봇의 사용이 증가하면서 그 용도가 점차로 다양해지고 있다. 이러한 로봇의 응용 분야 중에서 사람의 오감 중 하나인 촉각에 대한 연구가 활발히 이루어지고 있다. 이러한 연구들은 사람이 많이 필요한 단순 반복 작업부터 아주 정밀한 작업까지 매우 다양한 분야에서 사람의 작업을 대체하거나 도울 예정이다. 이들 연구 중에서 유연 촉각 센서는 로봇이 좀 더 사람과 같은 유연한 작업을 할 필요가 있는 분야에 활용되기 위하여 연구되고 있다. 이들 중 폴리머를 기본으로 하여 압력에 따라 저항 또는 정전용량 등이 변화되는 물질을 이용한 센서도 다양하게 연구되고 있으며, 본 연구는 PDMS 와 CNT 를 기반으로 하는 유연 촉각 센서를 다루고 있으며, 특히 유연한 센서를 사용할 때 발생하는 주요한 문제점인 연결 단자와의 접촉 저항에 의한 노이즈를 저감할 수 있는 방안을 모색하고자 한다. PDMS 의 열 경화 온도와 경화 시간에 따른 압력에 의한 저항 변화의 효과를 실험적으로 측정하고 이를 일반적인 배선과 연결할 때에 레이저 소착을 활용하여 그 접촉 노이즈를 저감할 수 있는지 실험을 통하여 확인하고자 한다. 실험에 사용된 센서의 제조 방법과 실험의 내용 및 그 결과치를 소개하고 결과적으로 센서의 안정도가 향상되는지의 여부를 소개하고자 한다.
김태우(T.W. Kim),강안종(A.J. Kang),진기호(G.H. Chin),김학성(H.S. Kim) 전력전자학회 2003 전력전자학술대회 논문집 Vol.2003 No.7(2)
In tills paper, an Improved full wave mode ZVT - PWM DC-DC Converter is presented to maximize the regeneration ratio of resonant energy by only putting an additional diode in seres with auxiliary switch. The operation of auxiliary switch in a half wave mode makes possible the soft switching con야tion of all switches Furthermore, the increase of the regeneration ratio to resonant energy results in low conduction losses and minimum voltage and current stresses The operation principles of the proposed converters are analyz -00 using the PWM boost converter topology as an example Theoretically analysis and experimen -tal results venfy the validity of the boost converter topology with the proposed full wave mode ZVT-PWM converters<br/>