http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
한국어판 Graded Readers 을 이용한다독 수업의 효과에 관한 실증적 연구
김창구(Chang Goo Kim) 언어과학회 2013 언어과학연구 Vol.0 No.66
The purpose of this study is to examine the effects of extensive reading in KFL settings. For this, we prepared 13 Korean Graded Readers and carried out extensive reading program during 13 weeks in a Japanese university. After 13 weeks-extensive reading program, we compared the gains differences between ER group and control group. The result of reading speed task showed that the ER group`s reading rate became faster than that of control group, but as for C-test, there was no statistically significant difference between two group>. The quantitative am qualitative analyses of questionnaire about ER program and its effects suggested that ER program can affect students` attitude toward reading behavior positively, but it is appeared not enough to induce motivation on learning Korean.
CFD에 의한 파력발전용 횡류터빈의 내부유동과 성능 해석
김창구(Chang Goo Kim),최영도(Young Do Choi),김유택(You Taek Kim),이영호(Young Ho Lee) 한국유체기계학회 2007 유체기계 연구개발 발표회 논문집 Vol.- No.-
Clean and renewable energy technologies using ocean energy give us non-polluting alternatives to fossil and nuclear-fueled power plants to meet establishment of countermeasures against the global warming and growing demand for electrical energy. Among the ocean energy resources, wave power takes a growing interest because of its enormous amount of potential energy in the world. Therefore, various types of wave power system to capture the energy of ocean waves have been developed. The purpose of this study is to investigate the internal flow and performance characteristics of an cross-flow hydraulic turbine with axisymmetric nozzle shapes. Numerical simulation using a commercial CFD code is conducted to clarify the effects of the turbine rotation speed and flow rate variation on the turbine characteristics. The results show that the output power of the cross flow hydraulic turbine with axisymmetric nozzle shape is obtained mainly from static pressure at Stage 1 and absolute tangential velocity at Stage 2. In addition, nozzle shape should be decided in consideration of the average wave height of the expected installation site.
김창구(Chang-Goo Kim),조영진(Young-Jin Cho),최영도(Young-Do Choi),김유택(You-Taek Kim),이영호(Young-Ho Lee) 한국마린엔지니어링학회 2007 한국마린엔지니어링학회 학술대회 논문집 Vol.2007 No.-
Wave power generation is getting into the spotlight by one future important substitute energy by clean & pure energy. In this paper, analyzed performance for new cross-flow hydraulic turbine that use wave energy using the commercial CFD code. The cross-flow hydraulic turbine in respect of oscillating flow applied in this paper was designed by suitable structure in wave power generation to rotate to direction that is equal about round trip kind. Used ANSYS CFX that is commercial CFD code for CFD analysis, and examined performance of cross-flow hydraulic turbine by head, flux, number of rotation detailedly.
김창구(Kim, Chang-Goo),최영도(Choi, Young-Do),이영호(Lee, Young-Ho),Prasad, Deepak 한국신재생에너지학회 2009 한국신재생에너지학회 학술대회논문집 Vol.2009 No.11
Recent developments such as concern over global warming, depletion of fossil fuels and increase in energy demands by the increasing world population has eventually lead to mass production of electricity using renewable sources. Apart from wind and solar, ocean holds tremendous amount of untapped energy in forms such as geothermal vents, tides and waves. The current study looks at generating power using waves and the focus is on the primary energy conversion (first stage conversion) of incoming waves for different models. Observation of flow characteristics and the velocity in the augmentation channel as well as the front guide nozzle are presented in the paper. A numerical wave tank was used to simulate the waves and after obtaining the desired wave properties; the augmentation channel plus the front guide nozzle and rear chamber were integrated to the numerical wave tank. The waves in the numerical wave tank were generated by a piston type wave maker which was located at the wave tank inlet. The inlet which was modeled as a plate wall moved sinusoidally with the general function, x=asinomegat The augmentation channel consisted of a front nozzle, rear nozzle and an internal fluid region representing the turbine housing. The analysis was performed using the commercial CFD code ANSYS-CFX.
GPS와 타이머 기능을 이용한 자동 매너모드 시스템 설계
김창구(Changgu Kim),이우교,성시민(Simin Sung),송진(Jin Song),김선미(Sunmi Kim),장순천(Sunchon Jang),임양원(Yangwon Lim),임한규(Hankyu Lim) 한국정보기술학회 2012 Proceedings of KIIT Conference Vol.2012 No.5
스마트폰의 대중화로 사용자도 똑똑해져야 하는 이 시대에 아직도 강의실이나 도서관, 공연장 등 정숙을 요구하는 장소에서 휴대폰을 매너모드를 설정하지 않아 부적절한 상황이 생기는 일이 일어나고 있다. 이에 본 연구는 기본적인 타이머 기능과 위치기반 기술인 GPS 기능을 사용자가 선택하여 스마트폰의 매너모드를 GPS 위치정보 수신 및 위치등록으로 변환되게 하거나 타이머에서 미리 설정해 둔 시간에 자동으로 설정, 해제시켜주는 어플리케이션을 개발하기 위한 요구분석과 설계에 중점을 두었다. 사용자는 자신에게 맞는 타입의 매너모드를 사용함으로써 더 이상 공공장소에서 타인에게 불편을 주는 일이 생기지 않을 것으로 기대된다. With the widespread use of smartphones, people are responsible for using them carefully, especially at public places. Smartphone owners often have a bashful experience as they forgot to switch their phones to manner mode (or silent mode) at public places like classrooms, libraries, concert halls, etc. To address this problem, we propose a smartphone application that enables users to set their smartphone in either GPS-based manner mode or Timer-based manner mode at their convenience. The GPS-based manner mode utilizes the GPS unit that provides a mobile user’s location information. This mode allows a user to register certain locations and automatically activates or deactivates manner mode based on the user’s current location and the registered locations. The Timer-based manner mode uses the timer function to automatically activate or deactivate manner mode according the time set. This paper focuses on analyzing the requirements of the proposed application and designing the application system. The proposed application can help prevent smartphone users from interrupting and discomforting others inadvertently.
파력에너지 변환을 위한 직접구동터빈의 파고에 따른 성능 실험에 관한 연구
김창구(Chang-Goo Kim),최영도(Young-Do Choi),김유택(You-Taek Kim),이영호(Young-Ho Lee) 한국마린엔지니어링학회 2008 한국마린엔지니어링학회 학술대회 논문집 Vol.2008 No.-
Newly developed direct drive hydro turbine (DDT) for wave energy converter is suggested in this study. The performance of the turbine model is investigated experimentally with the variation of the wave height in a 2-D wave tank. The results show that the performance of the turbine varies considerably by the wave height. The static pressure and flow rate at the turbine front nozzle as well as the rotational speed of the runner change remarkably by the wave height.
코퍼스를 통해서 본 일본의 한국어 교재에 제시된어휘의 諸相
김창구(Kim, ChangGoo) 언어과학회 2014 언어과학연구 Vol.0 No.71
This study investigates the aspects of vocabularies used in Korean textbooks in Japan(JP) from corpus-based perspectives and suggests ideas for future directions in developing textbooks. To attain this goal, this study compares JP with 4 reference corpora(spoken, soft opera and textbooks in Korea[KR]), regarding to token & type frequence, lexical richness, and coverage of Korean fundamental vocabulary list. The results show that a) JP’s token frequency is 1.3 times as large as KR, but the type vice versa; b) JP``s lexical richness is richer than that of KR; and c) the frequence distribution of the part of speech in JP is the order of noun-verb- adjective-adverb, which is the same with KR, but different from other corpora, especially in terms of adverb, pronoun and interjection; d) concerning the coverage of fundamental vocabulary, JP covered 59.4% of the list; e) the over-represented words are noun(63.5%), and these have tendency to be related to the specific semantic fields. From these results, I suggest that textbook developers are better to refer to frequency information in a natural language, instead of relying on their intuition only.