http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
김종구(Jongkoo Kim),함도용(Do Yong Hahm),남현우(Hyeonwoo Nam),김하진(Ha-Jine Kimn) 한국정보과학회 1998 한국정보과학회 학술발표논문집 Vol.25 No.2Ⅱ
여러 다양한 프랙탈 구조이 차원을 측정하는 개량된 프랙탈 차원 측정 방법을 제안하였다. 기존의 box counting 방법은 사용상 편리성은 있으나 측정에 사용되는 데이터에 의존적이어서 기존 box counting 방법의 약점을 보완, 개량한 방법의 적용으로 프랙탈 차원의 보다 정확한 측정 결과를 얻었다.
강연구(Kang, Younkoo),김영화(Kim, Younghwa),유영선(Ryou, Youngsun),김종구(Kim, Jongkoo),장재경(Jang, Jaekyoung),이형모(Lee, Hyoungmo) 한국신재생에너지학회 2011 한국신재생에너지학회 학술대회논문집 Vol.2011 No.05
Underground air is a special energy source in Jeju and distributes lava cave, pyroclastic, open joint, and crushing zone. A possible area to utilize underground air is 85% of Jeju except to the nearby area of Sambang Mt. and 25m high coastal area from sea level. In Jeju, underground air is used for heating agricultural facilities such as greenhouse cultivated mangos, Hallbong and mandarin orange, pigsty, mushroom cultivation house, etc. and fertilizing natural CO₂ gas by suppling directly into agricultural facilities. But this heating method causes several problem because the underground air has over 90% relative humidity and is inadequate in heating for crops. Mangos are the most widely grown tropical fruit trees and have been cultivated since 1993 in Jeju. In Jeju, the cultivating area is about 20ha and amount of harvest is 275ton/year in 2010. In this study, the heat pump system using underground air as heat source was installed in mangos greenhouse which area is 495m². The capacity of heat pump system and heat storage tank was 10RT, 5ton respectively and heating effect and heating performance of the system were analysed.
박민정(Minjung Park),이시영(Siyoung Lee),강동현(Donghyeon Kang),김종구(Jongkoo Kim),손진관(Jinkwan Son),윤성욱(Sung-wook Yoon),안세웅(Sewoong An) (사)한국생물환경조절학회 2017 생물환경조절학회지 Vol.26 No.4
작업 편이성을 높일 수 있는 원통형 종이포트를 일정한 크기로 생산하여 연속적 공급이 가능한 원통형 종이포트 제조장치를 개발하고, 장치의 성능시험을 수행하였다. 원통형 종이포트 제조장치는 상토공급부, 종이 공급부, 종이 접착부, 종이포트 절단부로 구성되어 종이포트 제조를 위한 상토공급부터 종이포트 절단까지의 공정이 연속적으로 이루어지도록 하였다. 상토 함수율에 따른 적정 상토공급압력시험에서는 상토를 공급하는 진공압이 높을수록 종이포트의 경도와 가밀도가 높게 나타났으며, 수분 함수율이 높아질수록 경도와 가밀도는 증가하다가 낮아지는 경향을 나타내어 포트제조부로 상토를 공급하기 위한 적정 함수율 및 공기압은 50%~60%와 0.5Mpa인 것으로 판단된다. 제조장치의 성능과 고형접착제에 의한 종이 접착시간을 고려하였을 때, 종이의 원통성형이 이루어지고 가이드부와의 유착없이 연속적인 공정이 이루어질 수 있는 적정 온도는 150℃~160℃인 것으로 판단된다. 원통형 종이포트 절단칼날의 최적 절단각도를 구명하기 위한 시험에서는 절단 속도와 작업의 안전성을 고려하여 최소 기울기인 30°에서 깨끗한 단면을 나타내는 일자칼날을 사용하는 것이 적합할 것으로 판단된다. 원통형 종이포트 제조장치의 성능시험에서 종이포트의 길이는 설정한 길이로 균일하게 제조되었으며, 종이접착 및 상토공급 등 준비 시간을 제외한 종이포트(직경: 40mm, 길이: 40mm) 제조 작업성능은 3300개/hr로 나타났다. This study was conducted to develop a cylindrical paperpot manufacturing equipment which is capable of continuously producing paperpots with a constant size. The equipment consists of the soil supply part, the paper supply part, the pot manufacturing part, the paperpot cutting part and its process for manufacturing paperpot from the soil supply to the paperpot cutting is continuously performed. As a result of the performance test using this equipment, we suggest that the optimal moisture content and injection pressure to supply soil are 50%~60%, and 0.5 Mpa respectively. Moreover the appropriate temperature for adhesive strength is 150~160℃ taking into account the performance of device and adhesion time. Also, considering the cutting speed and safety, it is appropriate to adopt a straight blade having a clean plan at a minimum angle of 30°. In addition, the manufacturing capacity of the developed equipment was 3300 pots per hour.