http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
2.5 MJ 고온초전도 SMES용 열 전도판의 와전류 손실 해석
이세연(S. Lee),박상호(S.H. Park),이지광(J.K. Lee),이상진(S.J. Lee),김우석(W.S. Kim),배준한(J.H. Bae),성기철(K.C. Seong),최경달(K. Choi),한송엽(S. Hahn) 대한전기학회 2010 대한전기학회 학술대회 논문집 Vol.2010 No.4
본 논문에서는 전도냉각형 2.5 MJ 고온 초전도 SMES(Superconducting Magnetic Energy Storage System)용 열 전도판의 와전류 손실 해석결과를 나타내었다. SMES의 운전 상태는 크게 충전, 저장, 방전의 3가지 구간으로 나눌 수 있다. 이 중 에너지의 충전과 방전 시에는 SMES의 초전도 코일에 전류 변화가 발생하기 때문에 코일과 인접하게 설치된 열전도판에 와전류가 발생하게 된다. 이러한 와전류 손실은 냉각장치의 부하로 작용하게 되어 SMES 시스템의 효율과 안정성을 높이기 위해 설계 시 반드시 고려되어야 하는 부분이다. 따라서 본 논문에서는 이러한 방전 조건에서의 열전도판에 발생하는 와전류 손실을 해석하고, 열전도판의 형상변화에 따른 와전류 손실 결과에 대해 검토하였다.
김우석,박충렬,현옥배,김혜림,임성우,유승덕,양성은,Kim, W.S.,Park, C.R.,Hyun, O.B.,Kim, H.R.,Yim, S.W.,Yu, S.D.,Yang, S.E. 한국초전도학회 2010 Progress in superconductivity Vol.12 No.1
A double line commutation (DLC) type SFCL with first peak limiting function has been proposed for ideal fault current limiting operation. Very fast switching (commutation) without any arc or high voltage problems for any kind of switching device is needed for the first peak current limiting. We've tried to find suitable conditions for a successful switching of a Vacuum Interrupter (VI) with HTS elements as a Peak Current limiting Resistance (PCR).
복합고체절연물의 극저온 절연성능 평가를 위한 임펄스 내전압시험
김우석,유승덕,현옥배,김혜림,임성우,양성은,김희선,Kim, W.S.,Ryu, S.D.,Hyun, O.B.,Kim, H.R.,Yim, S.W.,Yang, S.E.,Kim, H.S. 한국초전도학회 2011 Progress in superconductivity Vol.13 No.1
High voltage insulation in cryogenic environment is one of big issues for development of superconducting power application, such as superconducting fault current limiter, transformer, transmission cable, and so on. We had proposed a composite solid insulator composed of plastics and polymer insulation sheets for a use of high voltage superconducting power applications. It is well known that the G10 FRP keeps its mechanical strength at very low temperature and the PPLP is very good insulator adopted as insulations for superconducting transmission cables. The composition of these two materials will show very good electrical and mechanical properties adequate for the insulation components of superconducting power applications, such as bushing, insulation barrier, and even for a cryostat. Dielectric strengths of prepared samples were measured at the temperature of boiling point of liquid nitrogen at atmospheric pressure, which will be presented in this paper to show a usefulness of this technique.
김영일(Y.I. Kim),김우석(W.S. Kim),이세연(S.Y. Lee),박상호(S.H. Park),최경달(K. Choi) 대한전기학회 2009 대한전기학회 학술대회 논문집 Vol.2009 No.4
초전도 DC 마그네트에 영구전류 (Persistent Current)를 흘리기 위해서는 초전도 접합(Supercon-ducting Joint)이 필요하다. 저온 초전도 선재는 초전도 접합이 가능하며 고온 초전도체 중 BSCCO 선재로도 초전도 접합을 만들 수 있다. 그러나 최근 개발되어 향후의 초진도기기에 적용될 2세대 초전도 선재인 ReBCOCC(Coated Conductor)로는 아직 초전도 접합을 만들 수 없다. 본 연구에서는 광폭 선재의 중심을 가르고 양 종단부가 그대로 붙여진 형태의 선재를 이용하여 영구전류를 흘릴 수 있는 고온 초전도 마그네트를 제작하였다. 영구전류 초기 충전을 위하여 1.2 m 길이의 ReBCO 도체 종단부에 스테인리스 히터를 부착하여 영구전류 스위치를 구성하였다. 발생된 자기장의 시간적 균일성올 측정하기 위하여 34 시간동안 홀센서를 시용하여 대기압액체질소 77.3 K에서 자기장을 측정하였다.