http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
김용현,김대영,이광학 ( Yong Hyun Kim,Dae Young Kim,Kwang Hak Lee ) 한국주조공학회 1996 한국주조공학회지 Vol.16 No.3
N/A In thia study, wear resistance of P-V cast iron which is used as a material of cylinder liner for marine engine was investigated. Wear test was conducted by the wear test machine of Suzuki type(EFM-III-E model, 5000N for load, 4.0㎧ for velocity, Japan). Adhesive and scuffing wear phenomena was studied when load was changed from 60N to 400N and wear velocity was 0.25㎧ at room temperature and 250℃. In the case of dry friction at room temperature, scuffing phenomena of wear test specimens without vanadium was occurred at 400N, specimens with vanadium at the 400N was observed only adhesive wear phenomena. In the case of dry friction at 250℃, scuffing phenomena was observed at 180N for wear specimens without vanadium and 240N for wear specimens with vanadium.
담배 연기에 의한 Muc5ac 유전자 발현에 관여하는 세포 내 신호 전달 경로로서의 ERK1/2와 p38 MAPK
김용현 ( Yong Hyun Kim ),윤형규 ( Hyoung Kyu Yoon ),김치홍 ( Chi Hong Kim ),안중현 ( Joong Hyun Ahn ),권순석 ( Soon Seog Kwon ),김영균 ( Young Kyoon Kim ),김관형 ( Kwan Hyoung Kim ),문화식 ( Hwa Sik Moon ),박성학 ( Sung Hak Par 대한결핵 및 호흡기학회 2005 Tuberculosis and Respiratory Diseases Vol.58 No.6
다공질 Ni 및 Ni-Cr으로 강화한 AC4C 복합재료의 제조 및 특성연구
김용현 ( Young Hyun Kim ),김억수 ( Eok Soo Kim ),여인동 ( In Dong Yeo ),이광학 ( Kwang Hak Lee ) 한국주조공학회 2000 한국주조공학회지 Vol.20 No.1
Ni and Ni-Cr porous metals which are estimated to be easy to fabricate by squeeze casting are used as strengtheners for composite materials. As a matrix material, Al-7%wtSi-0.3 wt%Mg(AC4C) has been used. In case of Ni/AC4C and Ni-Cr/AC4C composite, 750℃ melt temperature and minimum 25 MPa squeezing pressure are needed to produce sound composite materials. The observation of interfacial reaction zone at various heat treatment condition showed that solutionizing temperature of above 520℃, the interfacial reaction zone increased proportionally with increasing heat treatment time and reaction products formed by interfacial reaction are mainly composed of Al3Ni and Al3Ni2 phases. The tensile strength of Ni/AC4C and Ni-Cr/AC4C composite is lower than the matrix metal and this can be explained by the brittle intermetallic compounds formed at the interface of Ni and Ni-Cr reinforcements. But the properties of hardness, wear resistance and thermal expansion are better than the matrix due to the strengthening effect of Ni-Cr porous metals.
김용현 ( Yong-hyun Kim ),서다솜 ( Dasom Seo ),조병효 ( Byeong-hyo Cho ),김원경 ( Won-kyung Kim ),송혜영 ( Hye-young Song ),김경철 ( Kyoung Chul Kim ) 한국농업기계학회 2021 한국농업기계학회 학술발표논문집 Vol.26 No.2
작물 모니터링 및 수확 로봇의 인식을 위해 CCD 카메라가 많이 사용되고 있다. 수경재배의 경우 작물 인식을 위해 CCD카메라를 활용하게 되면 뒤에 있는 작물을 인식하는 문제가 있다. 이러한 문제점은 작물의 모니터링 및 수확 시 로봇의 작업 정확도를 저하하는 원인이 될 수 있다. 이러한 이유로 최근에는 RGB-D 카메라를 이용하는 연구가 진행되고 있으며, RGB-D 카메라는 세 가지 색상 채널(RGB; Red, Green, and Blue) 외에도 깊이 채널(D)을 제공하기 때문에 이미지에서 특정 지점까지의 거리를 추정할 수 있다. 따라서 본 연구에서는 수확 로봇의 작업거리 영역만 검출하기 위해 RGB-D 카메라(ZED2, StereoLabs, San Francisco CA, USA)를 적용하고자 하였다. 먼저, RGB-D 카메라를 이용하여 토마토 온실의 2D 영상 및 3D 데이터를 취득하였다. 취득된 2D 영상 및 3D 데이터는 좌표 정합을 한 후, 각 픽셀의 거리 값을 계산하였고, 카메라와의 거리가 800 mm 이상인 영역은 모두 block으로 처리하였다. 그 결과, 모니터링 로봇의 작업거리 영역의 작물만을 인식하기 위해 RGB-D 카메라가 사용될 수 있음을 확인하였다. 그러나 1080720 사이즈의 모든 픽셀 값을 처리하는데 0.1 fps의 처리시간이 걸렸다. 향후에는 모든 픽셀이 아닌 작물이 인식된 픽셀 값 만을 처리하여 인식 시스템을 개선할 계획이다.