인간의 행동 인식을 위한 얼굴 방향과 손 동작 해석

김성은,조강현,전희성,최원호,박경섭,Kim, Seong-Eun,Jo, Gang-Hyeon,Jeon, Hui-Seong,Choe, Won-Ho,Park, Gyeong-Seop 제어로봇시스템학회 2001 제어·로봇·시스템학회 논문지 Vol.7 No.4

In this paper, we describe methods that analyze a human gesture. A human interface(HI) system for analyzing gesture extracts the head and hand regions after taking image sequence of and operators continuous behavior using CCD cameras. As gestures are accomplished with operators head and hands motion, we extract the head and hand regions to analyze gestures and calculate geometrical information of extracted skin regions. The analysis of head motion is possible by obtaining the face direction. We assume that head is ellipsoid with 3D coordinates to locate the face features likes eyes, nose and mouth on its surface. If was know the center of feature points, the angle of the center in the ellipsoid is the direction of the face. The hand region obtained from preprocessing is able to include hands as well as arms. For extracting only the hand region from preprocessing, we should find the wrist line to divide the hand and arm regions. After distinguishing the hand region by the wrist line, we model the hand region as an ellipse for the analysis of hand data. Also, the finger part is represented as a long and narrow shape. We extract hand information such as size, position, and shape.

회원작품 - 청연재 淸緣齋

김성은,Kim, Seong-eun 대한건축사협회 2014 建築士 Vol.2014 No.9

W-1.5 ZrO₂ 복합재료 합성과 급속소결

김성은,손인진,Kim, Seong-Eun,Shon, In-Jin 한국재료학회 2018 한국재료학회지 Vol.28 No.11

$ZrO_2$ is a candidate material for hip and knee joint replacements because of its excellent combination of biocompatibility, corrosion resistance and low density. However, the drawback of pure $ZrO_2$ is a low fracture toughness at room temperature. One of the most obvious tactics to cope with this problem is to fabricate a nanostructured composite material. Nanomaterials can be produced with improved mechanical properties(hardness and fracture toughness). The high-frequency induction heated sintering method takes advantage of simultaneously applying induced current and mechanical pressure during sintering. As a result, nanostructured materials can be achieved within very short time. In this study, W and $ZrO_2$ nanopowders are mechanochemically synthesized from $WO_3$ and Zr powders according to the reaction($WO_3+3/2Zr{\rightarrow}W+3/2ZrO_2$). The milled powders are then sintered using high-frequency induction heating within two minutes under the uniaxial pressure of 80MPa. The average fracture toughness and hardness of the nanostructured W-3/2 $ZrO_2$ composite sintered at $1300^{\circ}C$ are $540kg/mm^2$ and $5MPa{\cdot}m^{1/2}$, respectively. The fracture toughness of the composite is higher than that of monolithic $ZrO_2$. The phase and microstructure of the composite is also investigated by XRD and FE-SEM.

Comparison of Volumes between Four-Dimensional Computed Tomography and Cone-Beam Computed Tomography Images using Dynamic Phantom

김성은,원희수,홍주완,장남준,정우현,최병돈,Kim, Seong-Eun,Won, Hui-Su,Hong, Joo-Wan,Chang, Nam-Jun,Jung, Woo-Hyun,Choi, Byeong-Don Korean Society for Radiation Therapy 2016 대한방사선치료학회지 Vol.28 No.2

목 적 : Computerized imaging reference systems 동적팬텀을이용한 cone-beamcomputed tomography(CBCT) 영상과 four-dimensionalcomputed tomography(4DCT) 영상의 체적을 비교분석 하고자 한다. 대상 및 방법 : 동적팬텀 내에 직경 1, 2, 3 cm 노드를 각각 삽입하고, CT simulator와 TruebeamSTx X-ray Imaging system을 이용하여 4DCT 영상과 CBCT 영상을 얻었다. 4DCT 영상은 maximum intensity projection(MIP), minimum intensity projection(MinIP), 그리고 average intensity projection(AVG)영상으로 재구성 하고 노드의 체적은 Eclipse system의 CT ranger tool로 CT number를 설정하여 측정하였다. 결 과 : CBCT를 기준으로 노드1, 2, 3 cm의 체적을 비교하였을 때 4DCT의 MIP는 0.54~2.33, 5.16~8.06, 9.03~20.11 ml, MinIP는 0.00~1.48, 0.00~8.47, 1.42~24.85 ml, AVG는 0.00~1.17, 0.00~2.19, 0.04~3.35 ml의 차이를 보였다. 결 론 : 노드의 체적을 비교한 결과 CBCT 영상은 4DCT의 AVG 영상과 유사한 것으로 확인되었다. Purpose : The aim of this study was to compare the differences between the volumes acquired with four-dimensional computed tomography (4DCT)images with a reconstruction image-filtering algorithm and cone-beam computed tomography (CBCT) images with dynamic phantom. Materials and Methods : The 4DCT images were obtained from the computerized imaging reference systems (CIRS) phantom using a computed tomography (CT) simulator. We analyzed the volumes for maximum intensity projection (MIP), minimum intensity projection (MinIP) and average intensity projection (AVG) of the images obtained with the 4DCT scanner against those acquired from CBCT images with CT ranger tools. Results : Difference in volume for node of 1, 2 and 3 cm between CBCT and 4DCT was 0.54~2.33, 5.16~8.06, 9.03~20.11 ml in MIP, respectively, 0.00~1.48, 0.00~8.47, 1.42~24.85 ml in MinIP, respectively and 0.00~1.17, 0.00~2.19, 0.04~3.35 ml in AVG, respectively. Conclusion : After a comparative analysis of the volumes for each nodal size, it was apparent that the CBCT images were similar to the AVG images acquired using 4DCT.

다차원척도법(MDS)을 활용한 지하철 역세권과 TOD계획요소의 연관성에 따른 유형분류

김성은,원유호,Kim, Seong-Eun,Won, You-Ho 한국토지주택공사 토지주택연구원 2013 LHI journal of land, housing, and urban affairs Vol.4 No.2

최근 뉴어바니즘으로 기원된 압축복합도시개발, 대중교통지향개발(TOD)이 국내에서도 역시 트렌드로 자리잡고 있다. 이러한 새로운 도시개발의 패러다임은 기존의 자동차를 이용한 도시공간구조를 대중교통 중심으로 변화시키고 있다. 또한 녹색성장과 에너지절약 등의 친환경효과를 가지는 대중 교통지향형 개발은 지속가능성으로 각광받고 있다. 이렇듯 국내 대표적인 대도시 서울도 역시 대중교통을 중심으로 역세권 개발이 활성화 되고 있으나, 이에 대한 영향요인에 대한 실증연구는 미흡한 실정이다. 따라서 본 연구는 대도시의 광범위한 접근성을 고려하여 역세권을 기존보다 광범위하게 1km로 설정하고 토지이용 연면적, 접근성, 복합성, 도시설계요소 등의 세부지표를 요인분석을 통해 7개로 통합 및 유형화 하였다. 또한 다차원척도법을 이용하여 통합 유형화한 요인과 지하철 역세권의 연관성에 근거해 유형을 구분해본 결과 (1)'대중교통의 국지적 접근성', (2)'주변개발 수준','보행친화형 환승시설', (3)'대중교통의 광역적 접근성', (4)'중심지 토지이용용도', '역세권의 복합적 이용', '대중교통의 상호보완'과 같은 구분으로 4가지 차원으로 201개의 지하철역이 각 요인과 연관성을 나타내며 구분되었다. The City Complex Development and TOD originated from the Compact City are entrenched domestically. The New Urban Development such as these changes Structure of Urban space from the Automobile to the Public Transportation. Also, Transit-Oriented Development is drawing attention as sustainability because it has effects of Environment as Green growth. However, An empirical Study is insufficient about Influence Factors of Transit Oriented Development. Therefore This study sets up the Density spaced 1000m apart of Transit Oriented than the existing and did 7 Types considered of Accessibility, Complexity and Design Element according to the Factorial analysis. As a result, this study drew that (1) 'intraregional accessibility of public transit', (2) 'degree of development', 'pedestrian-friendly facility', (3) 'interzonal accessibility of public transit', (4) 'land-use of the city centre', 'complex using of rail station area', 'complementary public transit' are related 201 in number of the Subway stations according to the Multi-dimensional scaling.

빅데이터 분석으로 본 키워드 "4대강"

김성은,Kim, Seong-Eun 한국수자원학회 2017 물과 미래(한국수자원학회지) Vol.50 No.1

세계 고무산업의 동향 및 전망

김성은,kim Seong-Eun 대한타이어공업협회 1993 타이어 Vol.169 No.-

요인분석과 군집분석을 이용한 인공신경망 모델링 일반화 정확도 향상에 관한 연구: 유량 및 수질 예측에의 적용

김성은,서일원,Kim, Seong-Eun,Seo, Il-Won 한국수자원학회 2017 물과 미래(한국수자원학회지) Vol.50 No.6

복합보의 내력성능에 관한 연구 -정착판의 설치에 의한 거동의 차이-

김성은,Kim, Seong Eun 한국강구조학회 2000 韓國鋼構造學會 論文集 Vol.12 No.6

최근, 장스팬 구조물이 많이 요구되어지고 있다. 그로인하여 지진하중 및 풍하중에 의한 바닥의 진동방지 및 과대변형을 억제하기 위하여 강성을 증대시킬 필요가 있다. 이러한 목적으로, 철골의 단부를 철근콘크리트로 보강하는 것이 효과적이다. 이러한 유효 보강 방법을 실현하기 위해서는 철골 부분과 철골 단부를 철근콘크리트로 보강한 부분 사이의 경계부에서 원활한 응력전달이 이루어져야 한다. 따라서 원활한 응력전달을 위하여 그 경계부에 정착판을 설치하였다. 본 연구는 기존 실험을 기초로 한 수치해석을 통하여 유효 응력 전달 방법을 평가한 것이다. Recently, a long span is often required for the spacious building. Therefore the increase of stiffness is necessary to prevent floor vibration and control deformation of the building under earthquake and wind loads. For this purpose, steel beams with stiffened ends by reinforced concrete are effective. To realize such an effective reinforcement method, the smoothening of bending and shear stress transmission at the boundaries between middle-part of the steel beam and both end-parts of the steel beam with stiffened ends by reinforced concrete is required. Therefore, the fixed plate was installed at the boundary with the view of transferring the stress smoothly. This paper evaluates the method of effective transmission of bending and shear stress through the numerical analysis that is based on advanced experimental tests.

고지방식이(HFD)/stereptozotocin(STZ) 유도 당뇨모델에서 여주가 글루카곤 분비에 미치는 영향

김성은,김상백,김슬기,김현규,박병준,이학성,Kim, Seong-Eun,Kim, Sang-Back,Kim, Seul Ki,Kim, Hyun-Kyu,Park, Byoungjun,Lee, Hak Sung 한국환경과학회 2020 한국환경과학회지 Vol.29 No.8

In present study, we investigated the antidiabetic effect of Momordica charantia(as well known "bitter melon"). This study was conducted to determine antidiabetic mechanism of Bitter Melon Extract (BME). We measured blood glucose, insulin, glucagon level in a Sprague-Dawley rat model of high-fat diet/streptozotocin(HFD/STZ)-induced diabetes. Five experimental groups were used: normal, HFD/STZ, BME 62.5 mg/kg HFD/STZ, BME 125 mg/kg HFD/STZ and BME 250 mg/kg HFD/STZ. BME was orally administered to the rats every other day for 9 weeks. Results showed that fasting blood glucose levels were significantly lower in the BME 125 mg/kg(150.17 ± 20.22 mg/dL) and 250 mg/kg(124.17 ± 22.17 mg/dL) groups than in the vehicle group(188.83 ± 26.63 mg/dL)(p<0.05). In addition, glucagon levels were lower in the three BME treatment groups than in the vehicle group(p<0.05). Oral glucose tolerance tests revealed that the BME 250 mg/kg group had significantly(p<0.05) reduced 120-minute blood glucose levels and areas under the curve. Our results suggest that BME induces antidiabetic effects via the reduction of glucagon and blood glucose levels.