http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
$LiCoO_2/MPCF$전지에서 정$\cdot$부극 중량비의 영향
김상필,조정수,김희제,박정후,윤문수,Kim Sang-Pil,Cho Jeong-Soo,Kim Hee-Je,Park Jeong-Hu,Yun Mun-Soo 한국전기화학회 1999 한국전기화학회지 Vol.2 No.2
Li-ion 2차전지는 정극재료로 리튬전이금속산화물을, 부극재료로 탄소를 사용한다. 고용량 및 장수명을 지닌 Li-ion 2차 전지를 제작하기 위하여, 충전중에 탄소표면에 리튬 석출이 없이 전극 활물질의 이용율은 가능한 높아야 한다. 정극 및 부극 재료의 balance 및 적절한 충전 방식이 Li-ion 2차전지의 설계에 있어서 중요한 요소이다. 본 연구에서는 $LiCoO_2/MPCF$전지의 성능에 미치는 정$\cdot$부극 중량비의 효과를 고찰하였다. 먼저 각 반전지의 충방전 특성을 평가하였다. 그리고 흑연화 MPCF를 부극으로, $LiCoO_2$를 정극으로 사용하여 원통형 Li-ion 2차전지를 제작하였다. 기준전극으로 리튬금속을 사용하여 $LiCoO_2/MPCF$전지에서 각 반전지의 전위를 측정하였다. 또한 중량비에 따른 $LiCoO_2/MPCF$ 전지의 충방전 수명 성능을 평가하였다. 시험 결과, $LiCoO_2$ 정극의 이용율은 중량비에 의존하지 않지만, MPCF부극 이용율은 중량비에 크게 의존하였다. 또한, $LiCoO_2/MPCF$전지의 최적 중량비는 $2.0\~2.2$인 것으로 판단되었다. Li-ion cells employ lithium transtion metal oxide as the cathode material and carbon as anode material. To manufacture Li-ion cell with higher capacity and better cycle life, the utilization of electrode materials should be as high as possible without lithium deposition onto the carbon surface during charging. A careful design of cell balance between cathode and anode materials as well as a proper charge method is a key factor to design Li-ion cell with long cycle life. In this study, we investigated the effect of cathode/anode weight ratio on the performance of $LiCoO_2/MPCF$ cell. First we evaluated the charge-discharge behaviours of half-cells. And cylindrical Li-ion cells were fabricated using graphitized MPCF anode and $LiCoO_2$ cathode. The voltage profiles for each half-cell in $LiCoO_2/MPCF$ cell were measured by using lithium metal as a reference electrode. Also, we evaluated the cyclic performance of $LiCoO_2/MPCF$ cells according to weight ratio. From the result of experiment $LiCoO_2$ cathode utilization was independent of weight ratio, but MPCF anode utilization was dependant on weight ratio. Also, the optimal weight ratio of $LiCoO_2/MPCF$ cell was found to be $2.0\~2.2$.
엔빌로프 기반 하한을 사용한 효율적인 회전-불변 윤곽선 이미지 매칭
김상필,문양세,홍선경,Kim, Sang-Pil,Moon, Yang-Sae,Hong, Sun-Kyong 한국정보처리학회 2011 정보처리학회논문지D Vol.18 No.1
본 논문에서는 윤곽선 이미지 매칭에서 회전-불변 거리 계산의 효율적 방법을 제안한다. 회전-불변 거리 계산은 이미지 시계열을 한 칸씩 회전하면서 매번 유클리디안 거리를 계산해야 하는 고비용의 연산이다. 본 논문에서는 엔빌로프 기반 하한을 사용하여 회전-불변 거리 계산을 크게 줄이는 획기적인 해결책을 제시한다. 이를 위해, 먼저 질의 시퀀스 대상의 단일 엔빌로프 작성과 이의 하한 개념을 제시하고, 이를 회전-불변 거리 계산에 사용하면 많은 수의 회전-불변 거리 계산을 줄일 수 있음을 보인다. 그런데, 단일 엔빌로프 기법은 하나의 엔빌로프가 가능한 모든 회전 시퀀스를 포함하기 때문에 하한이 커지고, 이에 따라 매칭 성능이 저하되는 문제점이 있다. 이러한 문제점을 해결하기 위하여, 본 논문에서는 회전 구간의 개념을 도입하여 단일 엔빌로프 기반 하한을 다중 엔빌로프 기반 하한 개념으로 확장한다. 또한, 다중 엔빌로프 기법에서 회전 구간을 결정하기 위한 방법으로 동일-너비 기법과 엔빌로프 최소화 기법을 제안한다. 실험 결과, 제안한 엔빌로프 기반 매칭 기법은 기존 기법에 비해 최대 수 배에서 수십 배까지 매칭 성능을 향상시킨 것으로 나타났다. In this paper we present an efficient solution to rotation?invariant boundary image matching. Computing the rotation-invariant distance between image time-series is a time-consuming process since it requires a lot of Euclidean distance computations for all possible rotations. In this paper we propose a novel solution that significantly reduces the number of distance computations using the envelope-based lower bound. To this end, we first present how to construct a single envelope from a query sequence and how to obtain a lower bound of the rotation-invariant distance using the envelope. We then show that the single envelope-based lower bound can reduce a number of distance computations. This approach, however, may cause bad performance since it may incur a larger lower bound by considering all possible rotated sequences in a single envelope. To solve this problem, we present a concept of rotation interval, and using the rotation interval we generalize the envelope-based lower bound by exploiting multiple envelopes rather than a single envelope. We also propose equi-width and envelope minimization divisions as the method of determining rotation intervals in the multiple envelope approach. Experimental results show that our envelope-based solutions outperform existing solutions by one or two orders of magnitude.
김상필,남상우,손진우,Kim, Sang-Pil,Nam, Sang-U,Son, Jin-U 한국전자통신연구원 1989 전자통신동향분석 Vol.4 No.3
최근에 시스팀을 설계하는데 있어서, 디지틀 기기를 구성하는 전자부품과 Sub-system 또는 시스팀 전체에 대하여 하나의 표준언어 체계로 기술할 수 있는 VHDL의 발전과정 및 기술동향에 대해 살펴보고 이들 중 현재 부각되고 있는 것들에 대하여 요약하였다.