후두미세수술 후 음향지표의 변화와 환자의 만족도 비교

김범석,신지훈,김기용,이용섭,김경래,태경,Kim, Bum-Suk,Shin, Ji-Hun,Kim, Ki-Yong,Lee, Yong-Seop,Kim, Kyung-Rae,Tae, Kyung 대한후두음성언어의학회 2008 대한후두음성언어의학회지 Vol.19 No.2

Background and Object: The aim of this study is to evaluate the change of patient's subjective voice handicap index (VHI) and acoustic parameters before and after laryngeal microsurgery for benign vocal cord disease. Materials and Method: We analyzed 78 patients who received laryngeal microsurgery for benign vocal cord disease from January 2004 to February 2007 retrospectively. There were 28 vocal polyp, 40 vocal nodule, 5 intracordal cyst and 5 Reinke's edema. Jitter, shimmer, harmony to noise ratio (HNR) were analyzed before surgery and 2-3months after surgery using the Doctor's speech science program. The voice handicap index introduced by the Pittsburgh Voice Center was used to examine patient's subjective change of voice quality. Results: Acoustic parameters of jitter, shimmer and HNR were improved in patients with vocal polyp and vocal nodule after surgery. The acoustic parameters were not improved in patients with Reinke's edema, statistically. Only jitter was improved significantly in patients with intracordal cyst (p<0.05). The VHI was significantly improved after surgery. The change of jitter and shimmer was significantly correlated with the change of VHI after surgery. Conclusion: The acoustic parameters and VHI were significantly improved in patients with benign vocal disease after laryngeal microsurgery.

도로터널 내 공기질 측정과 Bag Filter를 이용한 미세먼지 제거 성능평가

김범석,박일건,정동균,이상돈,홍민선,Kim, Beom-Seok,Park, IL-Gun,Jung, Dong-Gyun,Lee, Sang-Don,Hong, Min-Sun 한국터널지하공간학회 2015 한국터널지하공간학회논문집 Vol.17 No.5

수도권에 있는 4개 도로터널을 선정해 오전 7시부터 오전 9시까지 미세먼지와 벤젠을 측정한 결과 PM10은 $111{\sim}268{\mu}g/m^3$으로 연간 대기환경기준치인 $50{\mu}g/m^3$을 2~5배 이상 초과하였고 PM2.5는 $35{\sim}65{\mu}g/m^3$으로 대기환경기준치인 $25{\mu}g/m^3$을 1.5배~2.5배 초과 하였다. 벤젠의 경우 300~500 ppb로 나타나 대기환경기준치인 1.5 ppb의 200~330배 초과하였다. 국내 장대터널에서 4개월 연속 측정한 결과 PM10의 경우 $30{\sim}400{\mu}g/m^3$으로 나타났고 Bag filter를 이용한 PM10의 제거효율은 97% 이상으로 나타나 향후 터널 내 대기질 개선에 기여할 것으로 판단된다. 벤젠의 경우 250~350 ppb로 측정되었다. Air quality was monitored in four roadway tunnels located near Seoul metropolitan area from 7:00AM to 9:00AM. PM10 concentrations range $111{\sim}268{\mu}g/m^3$, which are 2~5 times higher than annual standard $50{\mu}g/m^3$, and PM2.5 concentrations range $35{\sim}65{\mu}g/m^3$, which are 1.5~2.5 times higher than annual standard $25{\mu}g/m^3$. Benzene concentrations range 300~500 ppb, which are 200~300 times higher than 1.5 ppb which is air quality standard. Four-month long term air quality monitoring and test results in one of long tunnels show that PM10 range $30{\sim}400{\mu}g/m^3$ and over 97% of them can be removed by bag filter, effectively. Finally, benzene concentrations range 250~350 ppb.

요통환자의 비만도 및 요추전만도 상관성 연구

김범석,장건,이종수,임형호,Kim, Beum-Seuk,Jang, Gun,Lee, Jong-Soo,Lim, Hyung-Ho 척추신경추나의학회 2006 척추신경추나의학회지 Vol.1 No.2

Objectives: The purpose of this study was to investigate the relationship among lumbar lordotic and obesity in Low Back Pain Patient Methods: The subjects of this study were patients with low back pain who visited Jung-Dong Oriental Hospital. X-ray were taken in lateral decubitus. The measurements of the Ferguson angles(FA) and the lumbar lordotic angles(LLA) were performed. We measured BMI and WHR has been accessed bio-impedance analyzer(inbody 3.0). This results were statistically analyzed using SPSS 12.0. Results 1. In female group. FA and LLA were significantly higher than male group. 2. LLA was shown to decrease to rise with increasing WHR and BMI 3. FA had no realtion with WHR and BMI Conclusions: This data shows that obesity related to mechanical structures such as lumbar curvature. Obesity can be a one of the stressor of lumbar spine, and one of the causing factor of low back pain.

Branched - chain Fatty Acids 가 반추위 (反芻胃) 미생물의 성장과 소화율 및 VFA 생성에 미치는 영향

김범석,맹원재 ( Bum Suk Kim,Won Jae Maeng ) 한국낙농학회 1989 韓國酪農學會誌 Vol.11 No.1

육안과 분광 측정기를 이용한 자연 치아의 색조비교분석

김범석,신수연,이종혁,Kim, Bum-Suk,Shin, Soo-Yeon,Lee, Jong-Hyuk 대한치과보철학회 2008 대한치과보철학회지 Vol.46 No.5

도재 수복물 제작을 위해 자연치아의 색조를 분석하는 방법으로는 색견본 (shade guide)을 이용하는 시각적인 방법과 기계를 이용하는 방법이 있다. 그중 통상적인 육안 관찰을 통해 색조를 선택하는 것은 임상에서 가장 많이 이용되고 있는 방법이기는 하나 주관적이며 일관되지 않은 결과로 신뢰성의 문제가 제기되었으며 자연치의 색조는 매우 다양하여 같은 치아라 할지라도 부위별로 다양한 색조를 가지기 때문에 단순히 shade tab을 이용한 색조 비교만으로는 정확한 치아의 색조 특성을 나타내는 것이 불가능한 것으로 알려져 있다. 한편 지속적인 기술발달로 computer color matching system, 치과용 비색계, 분광 측정기 등의 기계를 이용한 치아 색조 측정 방법이 이의 대안으로 제시되고 있다. 기계를 이용한 방법은 색조 선택에 있어 객관적이며, 재현성이 있는 정확한 정보를 술자에게 제공한다. 이에 본 연구에서는 광원, 개인, 술자의 숙련도에 따라 육안과 기계를 통한 관찰 시 치아 색조 선택의 정확성을 확인하기 위한 실험을 시행하였다. 첫 번째 실험에서는 치과대학병원 전공의인 1명의 검사자가 10명의 피검자를 오전, 정오, 오후 각 3번의 측정을 통해 시간대별 자연광하에 육안, 기계 측정의 색조 선택 정확성을 분석하였다. 두 번째 실험에서는 5명의 치과대학병원 전공의와 5명의 치과대 학생, 총 10명의 검사자가 10명의 피검자를 정오에 육안, 기계 관찰을 통해 개인차에 따른 정확성을 실험하였다. 세 번째 실험에서는 두 번째 실험의 결과를 5명의 치과대학 전공의, 5명의 치과대학생 군으로 나누어 숙련도에 따른 육안, 기계 색조 선택의 정확성을 분석하였다. 실험 결과, 첫 번째 실험에서는 기계 측정 결과가 육안 측정보다 통계적으로 유의한 차이를 보이며 (P < .05) 색조 선택의 정확성을 나타내었고, 두 번째 실험에서 역시 기계 측정시 개개인의 육안 측정에 의한 색조 선택 값에 비해 재현성 및 정확성이 높았으며 통계적으로 유의한 차이를 보였다 (P < .05). 세 번째 실험에서 이전 실험의 결과를 숙련자, 비숙련자 군으로 나누어 분석한 결과 군 내 기계 측정값이 육안 관찰값보다 숙련도에 상관없이 정확도가 높으며 통계적으로 유의한 차이를 보였다 (P < .05). 하지만 군 간 육안, 기계 측정값을 비교 시 통계적으로 유의한 차이를 보이지 않아 치아 색조를 육안, 기계 측정할 때 술자의 숙련도가 큰 영향을 미치지 않음을 알 수 있었다. 따라서 기계를 이용하는 치아 색조 측정 방법이 색견본을 이용하는 시각적인 방법에 비해 더 정확하기는 하지만 어느 정도의 측색 오류를 고려해야하며 수복물 제작 시 정확한 재현과 효과적인 정보 전달을 위해 시각적인 방법과의 병행이 필요할 것으로 사료된다. Statement of problem: A clinically successful color match is one of the important factor to get an esthetic dental restoration. Dental shade guides are commonly used to evaluate tooth color in restorative procedure. But numerous reports have indicated that common shade guides do not provide sufficient spectral coverage of the natural tooth colors. To address issues associated with the shade guide, distinct avenues have been pursued objective spectrophotometric / colorimetric assessment. Purpose: This study compared the accuracy of tooth color selection of spectrophotometer with that of human visual determination. Three main factors were investigated, namely, the effect of light, the individual variation and the experience of the observer. Material and methods: At the first experiment, on ten patients, one operator independently selected the best matching shade to the unrestored maxillary central incisor, using a Vita Classical Shade Guide in the morning, at noon and in the afternoon. The same teeth were measured by means of a reflectance spectrophotometer. At the second experiment, on ten patients, ten operators (5 experts, 5 novices) selected and measured by the same method above at noon. At the third experiment, the results of the second experiment were divided into two groups, expert and novice, and analyzed. Results: 1. There was significant difference between visual and spectrophotometric assessment (mean ${\Delta}E$ values) in experiment 1, 2, 3 (P < .05). 2. There was no significant difference between experts and novices group, when comparing with each visual and spectrophotometric assessment (mean ${\Delta}E$ values). Conclusion: Spectrophotometer could be used to analyze the shade of natural tooth objectively. Thereby, this method offers the potential tominimize considerably the need for corrections or even remakesafter intraoral try-in of restoration. Furthermore, to achieve its advantage, both the shade-matching environment and communication between dentist and technician should be optimized with use of visual and instrumental shade-matching systems.

단주효과 및 고유주기를 고려한 비내진 학교시설의 반응 수정계수

김범석,박지훈,Kim, Beom Seok,Park, Ji-Hun 한국지진공학회 2019 한국지진공학회논문집 Vol.23 No.4

Response modification factors of school facilities for non-seismic RC moment frames with partial masonry infills in 'Manual for Seismic Performance Evaluation and Retrofit of School Facilities' published in 2018 were investigated in the preceding study. However, since previous studies are based on 2D frame analysis and limited analysis conditions, additional verification needs to be performed to further apply various conditions including orthogonal effect of seismic load. Therefore, this study is to select appropriate response modification factors of school facilities for non-seismic RC moment frames with partial masonry infills by 3D frame analysis. The results are as follows. An appropriate response modification factor for non-seismic RC moment frames with partial masonry infills is proposed as 2.5 for all cases if the period is longer than 0.6 seconds. Also if the period is less than 0.4 seconds and the ratio of shear-controlled columns is less than 30%, 2.5 is chosen too. However, if the period is less than 0.4 seconds and the ratio of shear-controlled columns is higher than 30%, the response modification factor shall be reduced to 2.0. If the period is between 0.4 and 0.6 seconds, then linearly interpolates the response correction factor.

다공질 실리콘의 광발광에 관한 계면활성제 PDFO 효과

김범석,윤정현,배상은,이치우,오원진,이근우,Kim Buem-Suck,Yoon Jeong-Hyun,Bae Sang-Eun,Lee Chi-Woo,Oh Won-Jin,Lee Geun-Woo 한국전기화학회 2001 한국전기화학회지 Vol.4 No.1

Effects of an anionic surfactant pentadecafluorooctanoic acid on the photoluminescence of porous silicon was investigated, which was prepared by photoelectrochemical etching at 4V of single crystalline n-type silicon (100) with the specific resistivity of $0.4\~0.8{\Omega}{\cdot}cm$. Photoluminescence shifted to shorter wavelength and its intensity decreased when the concentration of the surfactant increased. FT-IR and contact angle data supported the presence of the surfactant lying on the surface of porous silicon. 광전기화학적 양극 산화법으로 다공질 실리콘 (porous silicon, PS)을 제조할 때 전해질에 음이온성 계면활성제의 한 종류인 Pentadecafluorooctanoic acid (PDFO)를 첨가하여 제조한 PS의 광발광(photoluminescence, PL)의 변화를 조사하였다. 사용한 웨이퍼는 비저항이 $0.4\~0.8{\Omega}{\cdot}cm$인 n-형 단결정 실리콘 (100)이었으며, 일정전위 4V를 600초 동안 걸어주어 다공성 실리콘을 제조하였다. 이 때 나타난 PL의 변화는 첨가한 계면활성제의 농도가 1mM에서 50mM로 증가함에 따라서 PL의 중심파장이 600nm에서 550nm로 단파장 이동함을 보여주었으며, PL의 세기는 감소함을 보여주었다. FT-IR을 사용하여 에칭된 다공성 실리콘 위에 PDFO가 존재함을 알 수 있었고 Goniometer를 사용한 물방울 각도 측정을 통해서 생성된 표면이 소수성임을 알 수 있었다. 이로부터 계면활성제의 소수성 부분인 포화탄화불소 사슬 부분이 표면에 전체적으로 누워있다고 유추하였다.

Detection of Nitroaromatic Compounds Based on Fluorescent Silafluorene Chemosensors

김범석,Kim, Bumseok The Basic Science Institute Chosun University 2010 조선자연과학논문집 Vol.3 No.1

A simple and rapid method is described for detecting nitroaromatic explosives in air or seawater with the use of photoluminescent organosilicon compounds. The synthesis, spectroscopic characterization, and fluorescence quenching efficiency of silafluorenes are reported. Silafluorenes were synthesized from the reduction of dilithiobiphenyl with dichlorosilanes. Two silafluorenes were used for the detection of nitroaromatic compounds. Detection of nitroaromatic molecules, such as 2,4-dinitrotoluene (DNT), 2,4,6-trinitrotoluene (TNT), and picric acid (PA), has been explored. A linear Stern-Volmer relationship was observed for the first three analytes. Fluorescence spectra of silafluorenes obtained in either toluene solutions or thin films displayed no shift in the maximum of the emission wavelength. The photoluminescence quenching occurs by a static mechanism.

일반원고 3 - 고병원성 조류 인플루엔자 감염 가금류 살처분자의 안전 보호에 대한 실태 조사

김범석,이혜연,Kim, Beom-Seok,Lee, Hye-Yeon 대한수의사회 2015 대한수의사회지 Vol.51 No.11

BEMT에 의한 100kW 풍력터빈 블레이드 기본설계 및 출력 성능해석

김범석,김만응,이영호,Kim, Bum-Suk,Kim, Mann-Eung,Lee, Young-Ho 한국마린엔지니어링학회 2008 한국마린엔지니어링학회지 Vol.32 No.6

In this study, mathematical expressions based upon the conventional BEMT(blade element momentum theory) was applied to basic 100kW wind turbine blade configuration design. Power coefficient and related flow parameters, such as Prandtl's tip loss coefficient, tangential and axial flow induction factors of the wind turbine were analyzed systematically. X-FOIL was used to acquire lift and drag coefficients of the 2-D airfoils and Viterna-Corrigan formula was used o interpolate he aerodynamic characteristics in post-stall region. Also, aerodynamic characteristics, measured in a wind tunnel to calculate he power coefficient was applied. The comparative results such as axial and tangential flow factors, power coefficients were presented in this study. Power coefficient, calculated by in-house code was compared with the GH-Bladed result. The difference of the aerodynamic characteristics caused the difference of the performance characteristics as variation as TSR.