인터넷쇼핑이 고객만족의 구매의도에 미치는 영향에 관한 연구 -중국 시장 중심으로-

( Shi Yi Yao ) 한국인터넷비즈니스학회 2014 인터넷비지니스연구 Vol.15 No.1

인터넷 쇼핑이 새로운 유통 채널이 되었고, 왕성히 발전하기 때문에 연구할 가치가 있다. 이 논문은 인터넷 쇼핑의 편리성, 저렴한 가격, 만족도, 고객의 재구매 의도.가 연구되었다. 이 연구를 위하여 샘플링으로 240부 설문 조사지를 발부하였다. 그 다음에 spss20.0으로 연구 분석하였다. 연구 방법은 성과 분석, 신뢰도 분석, 공동 분석, 회귀 분석으로 인터넷 쇼핑의 편리성, 저렴한 가격, 만족도, 고객의 재구매 의도를 확인하였다. 이 연구의 중요성은 고객의 구매력의 영향을 미치는 4 가지 요소를 분석을 하는 것이다. 연구결과는 인터넷 쇼핑의 큰 잠재력을 보여주었다. 결론으로, 인터넷쇼핑이 고객만족의 구매의도에 많은 영향을 미치는 것으로 조사되었다. Internet shopping is worth studying since it has become a new distribution channel and its booming development. Through research described in this paper: the convenience of internet shopping, low price, pleasure and diversity impact to the customers`re-purchase intent. This study examined a random sample of 240 copies of questionnaires. And use spss20.0 research and analysis. By using the following study methods: result analysis, reliability analysis, mutual analysis and regression analysis, proved that, the convenience of internet shopping, low price, pleasure and diversity produced positive impact to the customers` re-purchase intent. The significance of this study is analyzing the impact the customers` purchasing power by the four factors of internet shopping motivation. And the result shows great potential of internet shopping. In conclusion of this study will contribute to growth in the network market, so that flourish the emerging distribution channels.

Design and Implementation of a Universal System Control Strategy Applicable to VSC-HVDC Systems

Zhao, Yue,Shi, Li-bao,Ni, Yi-xin,Xu, Zheng,Yao, Liang-zhong The Korean Institute of Power Electronics 2018 JOURNAL OF POWER ELECTRONICS Vol.18 No.1

This paper proposes a universal system control strategy for voltage source converter (VSC) based high voltage direct current (HVDC) systems. The framework of the designed control strategy consists of five layer structures considering the topology and control characteristics of the VSC-HVDC system. The control commands sent from the topmost layer can be transmitted to the next layer based on the existing communication system. When the commands are sent to each substation, the following transmission of commands between the four lower layers are realized using the internal communication system while ignoring the communication delay. This hierarchical control strategy can be easily applied to any VSC-HVDC system with any topology. Furthermore, an integrated controller for each converter is designed and implemented considering all of the possible operating states. The modular-designed integrated controller makes it quite easy to extend its operating states if necessary, and it is available for any kind of VSC. A detailed model of a VSC-HVDC system containing a DC hub is built in the PSCAD/EMTDC environment. Simulation results based on three operating conditions (the start-up process, the voltage margin control method and the master-slave control method) demonstrate the flexibility and validity of the proposed control strategy.

Improvement of energy storage performance in PbZr0.52Ti0.48O3/PbZrO3 multilayer thin films via regulating PbZrO3 thickness

Yang Fei,Shi Yu Jia,Lin Lin,Chen Jing Yao,Hou Meng Zhe,Yu Ke Xin,Zhang Yi Han,Yuan Zheng,Li Xiao Fang,Hu Yan Chun,Shang Jun,Yin Shao Qian,Wang Xian Wei 한국물리학회 2023 Current Applied Physics Vol.50 No.-

In this work, to prepare the PbZr0.52Ti0.48O3(PZT)/PbZrO3(PZ) multilayer films, PZ films and PZT films were spin-coated on LaNiO3/SiO2/Si substrates in sequence by the sol-gel method, and the PZ films were prepared using PZ precursor solution with different concentrations. After each spin-coating, PZ layer and PZT layer were annealed with rapid thermal annealing (RTA) technique at 650 ◦C and 550 ◦C, respectively. The crystal structures, microstructures and electrical properties of the films with different PZ film thickness were comprehensively investigated. The PZ films with different thickness showed perovskite phase. The PZT films on crystallized PZ films exhibited the coexistence of pyrochlore phase and perovskite phase at the annealing temperature of 550 ◦C. The PZT/PZ multilayer films with 0.2 M PZ precursor solution exhibit typical anti-ferroelectricity with double hysteresis loops, while other multilayer films exhibit nearly linear loops. In addition, the recoverable energy storage density increases with the increase of the film thickness and reaches the maximum value 32.4 J/ cm3 in the PZT/PZ multilayer films with 0.4 M PZ precursor solution. Therefore, the ferroelectric properties of the PZT/PZ multilayer films could be regulated by different PZ film thickness, which effectively further enhances the energy storage performance.

An Analytical Solution for Voltage Stability Studies Incorporating Wind Power

Lin, Yu-Zhang,Shi, Li-Bao,Yao, Liang-Zhong,Ni, Yi-Xin,Qin, Shi-Yao,Wang, Rui-Ming,Zhang, Jin-Ping The Korean Institute of Electrical Engineers 2015 Journal of Electrical Engineering & Technology Vol.10 No.3

Voltage stability is one of the most critical security issues which has not yet been well resolved to date. In this paper, an analytical method called PQ plane analysis with consideration of the reactive power capability of wind turbine generator and the wake effect of wind farm is proposed for voltage stability study. Two voltage stability indices based on the proposed PQ plane analysis method incorporating the uncertainties of load-increasing direction and wind generation are designed and implemented. Cases studies are conducted to investigate the impacts of wind power incorporation with different control modes. Simulation results demonstrate that the constant voltage control based on reactive power capability significantly enhances voltage stability in comparison of the conventional constant power factor control. Some meaningful conclusions are obtained.

An Analytical Solution for Voltage Stability Studies Incorporating Wind Power

Yu-Zhang Lin,Li-Bao Shi,Liang-Zhong Yao,Yi-Xin Ni,Shi-Yao Qin,Rui-Ming Wang,Jin-Ping Zhang 대한전기학회 2015 Journal of Electrical Engineering & Technology Vol.10 No.3

Voltage stability is one of the most critical security issues which has not yet been well resolved to date. In this paper, an analytical method called PQ plane analysis with consideration of the reactive power capability of wind turbine generator and the wake effect of wind farm is proposed for voltage stability study. Two voltage stability indices based on the proposed PQ plane analysis method incorporating the uncertainties of load-increasing direction and wind generation are designed and implemented. Cases studies are conducted to investigate the impacts of wind power incorporation with different control modes. Simulation results demonstrate that the constant voltage control based on reactive power capability significantly enhances voltage stability in comparison of the conventional constant power factor control. Some meaningful conclusions are obtained.

Behavior of improved through-diaphragm connection to square tubular column under tensile loading

Ying Qin,Jing-Chen Zhang,Peng Shi,Yi-Fu Chen,Yao-Han Xu,Zuo-Zheng Shi 국제구조공학회 2018 Structural Engineering and Mechanics, An Int'l Jou Vol.68 No.4

Square tubular columns are commonly used in moment resisting frames, while through-diaphragm connection is the most typical configuration detail to connect the H-shaped beam to the column. However, brittle fracture normally occurs at the complete joint penetration weld between the beam flange and the through-diaphragm due to the stress concentration caused by the geometrical discontinuity. Accordingly, three improved types of through-diaphragm are presented in this paper to provide smooth force flow path comparing to that of conventional connections. Tensile tests were conducted on four specimens and the results were analyzed in terms of failure modes, load-displacement response, yield and ultimate capacity, and initial stiffness. Furthermore, strain distributions on the through-diaphragm, the beam flange plate, and the column face were comprehensively evaluated and discussed. It was found that all the proposed three types of improved through-diaphragm connections were able to reduce the stress concentration in the welds between the beam flange and the through-diaphragm. Furthermore, the stress distribution in connection with longer tapered through-diaphragm was more uniform.

Behavior of improved through-diaphragm connection to square tubular column under tensile loading

Qin, Ying,Zhang, Jing-Chen,Shi, Peng,Chen, Yi-Fu,Xu, Yao-Han,Shi, Zuo-Zheng 국제구조공학회 2018 Structural Engineering and Mechanics, An Int'l Jou Vol.68 No.4

Square tubular columns are commonly used in moment resisting frames, while through-diaphragm connection is the most typical configuration detail to connect the H-shaped beam to the column. However, brittle fracture normally occurs at the complete joint penetration weld between the beam flange and the through-diaphragm due to the stress concentration caused by the geometrical discontinuity. Accordingly, three improved types of through-diaphragm are presented in this paper to provide smooth force flow path comparing to that of conventional connections. Tensile tests were conducted on four specimens and the results were analyzed in terms of failure modes, load-displacement response, yield and ultimate capacity, and initial stiffness. Furthermore, strain distributions on the through-diaphragm, the beam flange plate, and the column face were comprehensively evaluated and discussed. It was found that all the proposed three types of improved through-diaphragm connections were able to reduce the stress concentration in the welds between the beam flange and the through-diaphragm. Furthermore, the stress distribution in connection with longer tapered through-diaphragm was more uniform.

Further study on improvement on strain concentration in through-diaphragm connection

Ying Qin,Jing-Chen Zhang,Peng Shi,Yi-Fu Chen,Yao-Han Xu,Zuo-Zheng Shi 국제구조공학회 2021 Steel and Composite Structures, An International J Vol.39 No.2

Hollow structural section (HSS) columns have been increasingly popular due to their structural and architectural merits. However, practical difficulty lies in developing proper connections. The through-diaphragm connections are considered as suitable connection type that is widely adopted in Asian countries. However, the stress concentration occurs at the location connecting through-diaphragm and steel beam. Furthermore, the actual load path from the beam flange is not uniformly transferred to the HSS column as conventionally assumed. In this paper, tensile tests were further conducted on three additional specimens with beam flange plate to evaluate the load versus displacement response. The load-displacement curves, yield and ultimate capacity, ductility ratio were obtained. Furthermore, the strain development at different loading levels was discussed comprehensively. It is shown that the studied connection configuration significantly reduces the stress concentration. Meanwhile, simplified trilinear load-displacement analytical model for specimen under tensile load was presented. Good agreement was found between the theoretical and experimental results.

Inhibition of Transient Receptor Potential Melastain 7 Enhances Apoptosis Induced by TRAIL in PC-3 cells

Lin, Chang-Ming,Ma, Ji-Min,Zhang, Li,Hao, Zong-Yao,Zhou, Jun,Zhou, Zhen-Yu,Shi, Hao-Qiang,Zhang, Yi-Fei,Shao, En-Ming,Liang, Chao-Zhao Asian Pacific Journal of Cancer Prevention 2015 Asian Pacific journal of cancer prevention Vol.16 No.10

Transient receptor potential melastain 7 (TRPM7) is a bifunctional protein with dual structure of both ion channel and protein kinase, participating in a wide variety of diseases including cancer. Recent researches have reported the mechanism of TRPM7 in human cancers. However, the correlation between TRPM7 and prostate cancer (PCa) has not been well studied. The objective of this study was to investigate the potential the role of TRPM7 in the apoptosis of PC-3 cells, which is the key cell of advanced metastatic PCa. In this study, we demonstrated the influence and potential function of TRPM7 on the PC-3 cells apoptosis induced by TNF-related apoptosis inducing-ligand (TRAIL). The study also found a novel up-regulated expression of TRPM7 in PC-3 cells after treating with TRAIL. Suppression of TRPM7 by TRPM7 non-specific inhibitors ($Gd^{3+}$ or 2-aminoethoxy diphenylborate (2-APB) ) not only markedly eliminated TRPM7 expression level, but also increased the apoptosis of TRAIL-treated PC-3 cells, which may be regulated by the phosphatidylinositol 3-kinase/protein kinase B (PI3K/AKT) signaling pathway accompany with up-regulated expression of cleaved Caspase-3, (TRAIL-receptor 1, death receptors 4) DR4, and (TRAIL-receptor 2, death receptors 5) DR5. Taken together, our findings strongly suggested that TRPM7 was involved in the apoptosis of PC-3 cells induced by TRAIL, indicating that TRPM7 may be applied as a therapeutic target for PCa.

Susceptibility Loci Associations with Prostate Cancer Risk in Northern Chinese Men

Wang, Na-Na,Xu, Yong,Yang, Kuo,Wei, Dong,Zhang, Yao-Guang,Liu, Ming,Shi, Xiao-Hong,Liang, Si-Ying,Sun, Liang,Zhu, Xiao-Quan,Yang, Yi-Ge,Tang, Lei,Zhao, Cheng-Xiao,Wang, Xin,Chen, Xin,Hui, Juan,Zhang, Asian Pacific Journal of Cancer Prevention 2013 Asian Pacific journal of cancer prevention Vol.14 No.5

Background: KLK3 gene products, like human prostate-specific antigen (PSA), are important biomarkers in the clinical diagnosis of prostate cancer (PCa). G protein-coupled receptor RFX6, C2orf43 and FOXP4 signaling plays important roles in the development of PCa. However, associations of these genes with PCa in northern Chinese men remain to be detailed. This study aimed to investigate their impact on occurrence and level of malignancy. Methods: All subjects were from Beijing and Tianjin, including 266 cases with prostate cancer and 288 normal individuals as controls. We evaluated associations between clinical covariates (age at diagnosis, prostate specific antigen, Gleason score, tumor stage and aggressive) and 6 candidate PCa risk loci, genotyped by PCR- high resolution melting curve and sequencing methods. Results: Case-control analysis of allelic frequency of PCa associated with PCa showed that one of the 6 candidate risk loci, rs339331 in the RFX6 gene, was associated with reduced risk of prostate cancer (odds ratio (OR) = 0.73, 95% confidence interval (CI) =0.57-0.94, P = 0.013) in northern Chinese men. In addition, subjects with CX (CC+TC) genotypes had a decreased risk for prostrate cancer compared to those carrying the TT homozygote (OR =0.64, 95% CI = 0.45- 0.90, P = 0.008). The TT genotype of 13q22 (rs9600079, T) was associated with tumor stage (P=0.044, OR=2.34, 95% CI=0.94-5.87). Other SNPs were not significantly associated with clinical covariates in prostate cancer (P > 0.05). Conclusions. rs339331 in the RFX6 gene may be associated with prostate cancer as a susceptibility locus in northern Chinese men.