http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
You-Qun Zhao,Zhao Wen Deng,Qi Xian Zhao,Bao Hua Wang,Wei Gao,Xin Xin Kong 한국자동차공학회 2022 International journal of automotive technology Vol.23 No.4
Directional performance and highway stability are two important aspects that need to be considered in development and design of a heavy articulated vehicles. To improve the maneuverability and stability of a multi-trailer articulated heavy vehicle (MTAHV), an active linear quadratic regulator (LQR) multi-axle-steering method is designed and examined. First, a linear yaw-plane model with four-degree-of freedom (4-DOF) for MTAHV is built and validated. Thus, a reference model supplying the desired state responses is introduced. Then, an active control algorithm of multi-axle-steering for the rear axles of tractor and full-trailer is investigated, and a LQR controller is proposed based on the linear vehicle model to make the control variables track the desired state responses. The control strategy concentrates on keeping the actual yaw rate and side-slip angle follow the steady-state yaw rate and zero side-slip angle. Finally, the effectiveness of the designed approach on enhancing the maneuverability and stability of the MTAHV have been validated through the simulations of the low-speed 360o roundabout and the single lane-change maneuver with high speed, respectively. The method has a certain reference value for improving the active safety of the MTAHV.
The Effect of Mn/Al Substitution on the Structural Stability and Magnetic Properties of Mn₃AlC
Xin-You Wang,Ping-Zhan Si,Hui-Dong Qian,Yang Yang,Hong-Liang Ge,Jihoon Park,Xin-Qing Wang,Chul-Jin Choi 한국자기학회 2019 Journal of Magnetics Vol.24 No.1
The structural stability and magnetic properties of Mn3+xAl1-xC antiperovskite with varied Mn/Al substitution were studied systematically. Single phase Mn3+xAl1-xC alloys with antiperovskite structure were obtained in samples with x = −1/4, 0, 1/4, 1/2. An additional Mn23C₆ phase was precipitated from Mn3+xAl1-xC antiperovskite for x = 3/4 while Mn23C₆ phase was formed as major phase for x = 1. The mutual substitution of Mn and Al atoms has substantial effect on the Curie temperature and the saturation magnetization of the Mn3+xAl1-xC alloys. In comparison with the as-cast alloys, the as-annealed Mn3+xAl1-xC alloys exhibit reduced Mn/Al substitutions after high temperature homogenization, which enhances the ordering of Mn and Al atoms in the lattices. The Curie temperature of the homogenized Mn3+xAl1-xC increases with increasing Mn substitution to Al. The Mn₃AlC alloy shows the highest saturation magnetization among all samples with varied Mn/Al ratios. Most samples show zero coercivity and zero remanent magnetization. The maximum value of the magnetic entropy changes of Mn2.75Al1.25C at 285 K is 2.26 J/㎏ K in fields up to 3 T.
Cao, Ming-Xin,Chen, Jie,Zhang, Jun-Long,Wei, Xin,Liang, Yue-You Asian Pacific Journal of Cancer Prevention 2015 Asian Pacific journal of cancer prevention Vol.16 No.8
Background: Liposarcoma of the spermatic cord is rare and frequently misdiagnosed. The standard therapeutic approach has been radical inguinal orchiectomy with wide local resection of surrounding soft tissues. The current trend of organ preservation in the treatment of several cancers has started to evolve. Herein we present our testis-sparing surgery experience in the treatment of spermatic cord liposarcoma and a pooled analysis on this topic. Materials and Methods: Clinical information from patient receiving organ-sparing surgery was described. Clinical studies evaluating this issue were identified by using a predefined search strategy, e.g., Pubmed database with no restriction on date of published papers. The literature search used the following terms: epidemiology, surgery, chemotherapy, radiotherapy, testis sparing surgery, spermatic cord sarcomas/liposarcomas. Results: Patient received a complete excision of the lesion, preserving the spermatic cord and the testis. The final pathological report showed a well differentiated liposarcoma with negative surgical margins and no signs of local invasion. After 2-year of follow-up, there was no evidence of local recurrence. Since the first case reported in 1952, a total of about 200 well-documented spermatic cord liposarcoma cases have been published in English literature. Among these patients, only three instances were reported to have received an organ-sparing surgery in the treatment of spermatic cord liposarcoma. Conclusions: Radical inguinal orchiectomy and resection of the tumor with a negative microscopic margin is the recommended treatment for liposarcoma of the spermatic cord. But for small, especially well-differentiated, lesions, testis-sparing surgery might be a good option if an adequate negative surgical margin is assured.
Xin, Yong,Wang, Jia-Yang,Li, Liang,Tang, Tian-You,Liu, Gui-Hong,Wang, Jian-She,Xu, Yu-Mei,Chen, Yong,Zhang, Long-Zhen Asian Pacific Journal of Cancer Prevention 2012 Asian Pacific journal of cancer prevention Vol.13 No.3
Objective: To make sure the feasibility with $^{18F}FDG$ PET/CT to guided dynamic intensity-modulated radiation therapy (IMRT) for nasopharyngeal carcinoma patients, by dosimetric verification before treatment. Methods: Chose 11 patients in III~IVA nasopharyngeal carcinoma treated with functional image-guided IMRT and absolute and relative dosimetric verification by Varian 23EX LA, ionization chamber, 2DICA of I'mRT Matrixx and IBA detachable phantom. Drawing outline and making treatment plan were by different imaging techniques (CT and $^{18F}FDG$ PET/CT). The dose distributions of the various regional were realized by SMART. Results: The absolute mean errors of interest area were $2.39%{\pm}0.66$ using 0.6cc ice chamber. Results using DTA method, the average relative dose measurements within our protocol (3%, 3 mm) were 87.64% at 300 MU/min in all filed. Conclusions: Dosimetric verification before IMRT is obligatory and necessary. Ionization chamber and 2DICA of I'mRT Matrixx was the effective dosimetric verification tool for primary focal hyper metabolism in functional image-guided dynamic IMRT for nasopharyngeal carcinoma. Our preliminary evidence indicates that functional image-guided dynamic IMRT is feasible.
Notes : First Report of Heterodermia squamulosa (Lichenized Ascomycota, Physciaceae) in South Korea
Xin Yu Wang,Hyun Hur,You Mi Lee,Young Jin Koh,Jae Seoun Hur The Korean Society of Mycology 2008 Mycobiology Vol.36 No.3
Heterodermia squamulosa (Degel.) W.L. Culb. was found in the mountain of Gariwang, Gangwon province, in 2008. It is characterized by numerous squamules along the margin, decorticate and white lower surface, rhizines along the margin, black and densely squarrosely branched, usually forming a dense mat under the thallus. Apothecia margins densely squamulose, ascospores 12~15 × 25~30 ㎛. Atranorin and zeorin contained in thallus. This is the first record of this species in South Korea.
Virtual Fit Analysis of Non-invasive Ventilation (NIV) Mask Design
Xin Cui(최신아),Hayoung Jung(정하영),Wonsup Lee(이원섭),Sungchul Huh(허성철),Soo-Yeon Kim(김수연),Sang Hun Kim(김상훈),Ra-Yu Yun(윤라유),Heecheon You(유희천) 대한인간공학회 2021 대한인간공학회 학술대회논문집 Vol.2021 No.11
Objective: The present study aimed to analyze the virtual fit of non-invasive ventilation (NIV) mask-wearing of patients with bulbar amyotrophic lateral sclerosis (ALS) for ergonomic mask design. Background: Bulbar ALS patients have larger morphological deformation of the face by posture than the healthy, which may cause a higher risk of NIV mask-related side effects such as pressure injuries and air leaks. Method: The virtual fits of an NIV mask in patients in three different postures were compared with the healthy in sitting posture. Four steps, including (1) acquisition of 3D data, (2) identification of mask-wearing position, (3) measurement of the horizontal distance, (4) analysis of mask fit, were performed. First, the 3D faces of 10 bulbar ALS patients (age: 59.2 ± 12.8 years) and 10 healthy subjects (age: 32.5 ± 13.2 years) were scanned in three postures, including sitting, supine, and lateral (left) postures. 3D data of 3 healthy subjects with properly donned NIV masks and the NIV mask were obtained. Second, the optimal mask-wearing position of 20 participants was identified based on the average horizontal distances of the mask to 3 healthy subjects. Then, the filtrations between 16 key landmarks of the face and the corresponding landmarks of NIV masks were measured using Rhino 3D (Robert McNeel and Associates, Seattle: WA, USA). Last, the horizontal distance of patients in three postures was compared with that of the healthy subjects in sitting posture. Results: In bulbar ALS patients, the fit of the mask was reduced by 21.0% at bilateral lower sides of the chin and increased by 24.6% at promentale compared to the optimal fit. In supine posture, mask fit was significantly reduced by 13.2% ~ 44.2% in the left and right cheeks and nasolabial folds. In lateral posture, the mask fit significantly decreased by 20.2% ~ 33.9% in the left cheek and increased by 9.6% at promentale and 10.9% in the upper right cheek. Conclusion: Unfit of NIV mask of bulbar patients in sitting, supine, and lateral posture was identified by virtual fit analysis. Application: Virtual fit analysis is applicable to provide quantitative evidence in the ergonomic NIV mask design process.
You-Hua Cai,Ze-Xin Liang,Shuang Li,Ming-Jun Zhu,Zhenqiang Wu,Shang-Tian Yang,Ju-Fang Wang 한국생물공학회 2012 Biotechnology and Bioprocess Engineering Vol.17 No.6
There is an increasing worldwide interest in bioethanol production from agricultural, industrial, and urban residues for both ecological and economic reasons. The acid hydrolysis of cassava pulp to reducing sugars and their fermentation to ethanol were evaluated in a fibrousbed bioreactor with immobilized Δldh, a genetically engineered Thermoanaerobacterium aotearoense. A maximum yield of total reducing sugars of 53.5% was obtained after 8 h of hydrolysis at 85oC in 0.4 mol/L hydrochloric acid with a solid-to-liquid ratio of 1:20, which was optimized by using an orthogonal design based on preliminary experiments. In the FBB, the fed-batch fermentation, using glucose as the sole carbon source, gave a maximum ethanol production of 38.3 g/L with a yield of 0.364 g/g in 100 h; whereas the fed-batch fermentation, using xylose as the sole carbon source, gave 34.1 g/L ethanol with a yield of 0.342 g/g in 135 h. When cassava pulp hydrolysate was used as a carbon source, 39.1 g/L ethanol with a yield of 0.123 g/g cassava pulp in185 h was observed, using the fed-batch fermentation model. In addition, for repeated batch fermentation of cassava pulp hydrolysate carried out in the fibrous-bed bioreactor, long-term operation with high ethanol yield and volumetric productivity were achieved. The above results show that the acid hydrolysate of cassava pulp can be used for ethanol production in a fibrous-bed bioreactor, although some inhibition phenomena were observed during the process of fermentation.