융합교육으로서 미술 감상 교육 콘텐츠 개발 연구

고홍규 ( Koh¸ Hongkyu ),박재용 ( Park¸ Jaeyong ),정동훈 ( Jung¸ Donghun ),장현진 ( Jang¸ Hyunjin ),김정임 ( Kim¸ Jeongim ),김현지 ( Kim¸ Hyunji ),채유정 ( Chae¸ Yoojeong ),한경은 ( Han¸ Kyungeun ) 서울교육대학교 초등교육연구원 2020 한국초등교육 Vol.31 No.4

본 연구는 미술 감상 교육을 기반으로 하여 과학, 사회(역사), 생활과학(실과) 등의 교과를 연계하는 융합교육 콘텐츠 개발을 목적으로 한다. 융합교육의 필요성과 중요성이 대두된 이래로 융합교육에 대한 많은 연구와 교육적 시도가 있었다. 하지만 우리 교육현장에서 대부분의 융합교육은 STEAM으로 대변되는 과학이나 수학 위주의 교육 프로그램이 주를 이루었다. 미술교과는 다양한 영역과 연계하여 학습될 수 있는 융합적 가능성이 많은 교과임에도 불구하고 그동안의 융합교육에서는 대개 그 융합적 가능성이 적절히 기능하지 못한 채 주변화 된 교과로 진행되는 경향이 있었다. 이러한 문제의식을 바탕으로 연구자는 미술교과, 그 중에서도 타 교과 영역과의 연계 가능성이 큰 미술 감상 영역을 중심으로 여러 교육 내용을 연계할 수 있는 융합적 교육 프로그램을 개발하여 시행하여 보고, 그 효과성을 검증하고자 하였다. 본 연구는 일련의 연구 과정의 첫 단계로서 융합교육 콘텐츠 개발을 목적으로 하였다. 개발된 교육 프로그램은 고구려 고분벽화 <무용총>, 신윤복의 <월하정인>, 김홍도의 <수운엽출>, 조선의 민화 <백동자도>, 레오나르도 다 빈치의 <최후의 만찬>, 한스 홀바인의 <대사들>, 요하네스 베르메르의 <사관과 웃고 있는 소녀>, 김환기의 <피난열차>, 가야 시대의 <오리모양 토기>, 그리고 조르주 쇠라의 <그랑자트 섬의 일요일 오후>의 총 10점의 미술 작품을 중심으로 초등학교 학생들의 학습 수준을 고려하여 과학, 사회(역사), 생활과학(실과) 등의 교과와 연계할 수 있는 내용들을 정리하여 제시하였다. 앞으로 후속 연구에서는 개발된 융합적 콘텐츠를 바탕으로, 이를 초등교육과정 및 현장에 부합하는 교수·학습과정안 및 교수 방법으로 개발하고자 한다. 또한 이를 실제 초등교육 현장에 적용하고 그 효과성을 검증이 이우러질 것이다. The purpose of this study is to develop and present a convergence education program that links subjects such as science, society (history), and life science (practical arts) based on art appreciation education. Since the necessity and importance of convergence education emerged, there have been many studies and educational attempts on convergence education. However, most of the convergence education in our educational field was mainly science or mathematics education programs represented by STEAM. Although art subjects have many fusion possibilities that can be learned in connection with various fields, in fusion education so far, the fusion possibilities tend to proceed to marginalized subjects without properly functioning. Based on this awareness of the problem, the researcher developed and implemented a convergent educational program that can link various educational contents centering on the art subject, especially the art appreciation area, which has a high possibility of linking with other subject areas, and reports its effectiveness. I tried to verify. This study aims to develop a convergence educationprogram as the first step in a series of research processes. Developed educational programs include Goguryeo tomb murals < Mudyong Chong >, Shin Yun-bok's < Wolha Jungin >, Kim Hong-do's < Sooun Yeopchul >, Joseon's folk painting < Baek Dongjado >, Leonardo da Vinci's < The Last Supper >, Hans Holbein's < The Ambassadors > >, Johannes Vermeer's < The Officer and the Laughing Girl >, Kim Whanki's < The Evacuation Train >, < Duck-shaped Pottery > from the Gaya Period, and Georges Seurat's < Sunday Afternoon on Granjat Island > As a result, contents that can be linked to subjects such as science, society (history), and life science (practical arts) are presented in consideration of the learning level of elementary school students. In the follow-up study, we will go further from this study and present more diverse educational contents based on art works, such as the programs developed in this study, and develop them as teaching/learning curriculum plans and teaching methods suitable for elementary school curriculum

Current Control of Sawyer Motors with Microstepping Method Using Proximated In-phase Current Estimator

Hongkyu Kim,Yoonmo Sung,Chung Choo Chung 제어로봇시스템학회 2018 제어로봇시스템학회 국제학술대회 논문집 Vol.2018 No.10

This paper presents Proportional-Integral Feed Forward(PIFF) controller using Proximate In-phase Current Estimator(PIpCE) for current control of sawyer motor. For current control, Low Pass Filter(LPF) has been widely used to remove high-frequency noise from feedback current. But the current filtered by LPF has phase lag which generates current tracking error, and also it can cause position tracking error. PIpCE obtains both advantages removing highfrequency noise and reducing current tracking error. The proposed algorithm applied to sawyer motor was validated with simulation results.

3D Printing 요소기술 및 적용방안

Hongkyu Kwon 한국산업경영시스템학회 2017 한국산업경영시스템학회 학술대회 Vol.2017 No.추계

A Novel Heuristic Mechanism for Highly Utilizable Survivability on WDM Mesh Networks

Hongkyu Jeong(정홍규),Byungjae Kim(김병재),Minho Kang(강민호),Yong-Gi Lee(이용기) 한국정보통신설비학회 2003 한국정보통신설비학회 학술대회 Vol.2003 No.1

Capitalism and Spiritual Capital

Hongkyu Lee 한국정보사회학회 2012 정보사회와 미디어 Vol.- No.24

Current capitalist system that has been developed along with material selfishness and blind competition seems to be seriously challenged by the public"s attention of rising income inequality. What the economy needs today is to enhance spiritual capital which is a complementary asset to material capital. Even if spiritual capital may not bring about immediate growth, the new framework of morality and cooperation has to be designed to ensure sustainable economic development. Korean economy that has been more evidently driven by material capital should also find a momentum to strengthen the base of its spiritual capital for future growth. A variety of policies for its execution can be found in three areas?education, institution, and leadership. This approach may be called ‘reflective capitalism’ which advances economy with a focus on the competences of morality and cooperation.

Case Study for Casting Layout Design of Automobile Part (Oil Pan_DX2E) using CAE simulation

Hongkyu Kwon,Ik-sung Lim 한국산업경영시스템학회 2013 한국산업경영시스템학회 학술대회 Vol.2013 No.춘계

When manufacturing die casting mold, generally, the casting layout design should be considered based on the relation among injection system, casting condition, gate system, and cooling system. Also, the extent or the location of product defects was differentiated according to the various relations of the above conditions. In this research, in order to optimizing casting layout design of an automobile part (Oil Pan_DX2E) Computer Aided Engineering (CAE) simulation was performed with two layout designs by using the simulation software (AnyCasting). The simulation results were analyzed and compared carefully in order to apply them into the production die-casting mold. During the mold filling with two models, internal porosities caused by air entrap were predicted and also compared by the modification of the gate system and the configuration of overflow. With the solidification analysis, internal porosities caused by the solidification shrinkage were predicted and also compared by the modification of the gate system.

Solar Absorption System Analysis with Spreadsheet Models

HongKyu Choi,Rocco A. Fazzolari 한국태양에너지학회 1992 한국태양에너지학회 학술대회논문집 Vol.- No.-

Case Study for Casting Design of Automobile Part (Gear Box) using CAE

Hongkyu Kwon,Moo-Kyung Jang 한국산업경영시스템학회 2012 한국산업경영시스템학회 학술대회 Vol.2012 No.추계

When manufacturing die casting mold, generally, the casting layout design should be considered based on the relation between injection system, casting condition, gate system, and cooling system. Also, the extent or the location of product defects was differentiated according to the various relations of the above conditions. In this research, in order to optimizing casting design of an automobile part (Gear Box) Computer Aided Engineering (CAE) was performed by using the simulation software (Z-Cast). the simulation results were analyzed and compared with experimental results. During the mold filling, internal porosities caused by air entrap were predicted and reduced remarkably by the modification of the gate system and the configuration of overflow. With the solidification analysis, internal porosities caused by the solidification shrinkage were predicted and reduced by the modification of the gate system. For making a better production die-casting tool, cooling systems on several thick areas are proposed in order to reduce internal porosities caused by the solidification shrinkage.

Complete Repair of Coarctation of the Aorta and a Ventricular Septal Defect in a 1,480 g Low Birth Weight Neonate

Hongkyu Lee,조준용,김근직 대한흉부외과학회 2011 Journal of Chest Surgery (J Chest Surg) Vol.44 No.2

Although outcomes of neonatal cardiac surgery have dramatically improved in the last two decades, low body weight still constitutes an important risk factor for morbidity and mortality. In particular, cardiac surgery in neonates with very low birth weight (≤1.5 kg) is carried out with greater risk because most organ systems are immature. We report here on a successful case of early one-stage total repair of coarctation of the aorta and a ventricular septal defect in a 1,480 gram neonate.

Case Study for Casting Layout Design of Automobile Part (Oil Pan_DX2E) using Computer Simulation

Hongkyu Kwon 한국산업경영시스템학회 2013 한국산업경영시스템학회 학술대회 Vol.2013 No.추계

When manufacturing die casting mold, generally, the casting layout design should be considered based on the relation among injection system, casting condition, gate system, and cooling system. Also, the extent or the location of product defects was differentiated according to the various relations of the above conditions. In this research, in order to optimizing casting layout design of an automobile part (Oil Pan_DX2E) Computer Aided Engineering (CAE) simulation was performed with two layout designs by using the simulation software (AnyCasting). The simulation results were analyzed and compared carefully in order to apply them into the production die-casting mold. During the mold filling with two models, internal porosities caused by air entrap were predicted and also compared by the modification of the gate system and the configuration of overflow. With the solidification analysis, internal porosities caused by the solidification shrinkage were predicted and also compared by the modification of the gate system.