http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
홍동진(Dongjin Hong),김종민(Chongmin Kim),김만영(Man Young Kim) 한국항공우주학회 2007 韓國航空宇宙學會誌 Vol.35 No.9
촉매 연소는 통상의 연소 방식과는 달리 촉매 표면에서 연료와 산화제의 화학 반응에 의한 연소 방식이다. 따라서 연소 영역 이전에 연료와 공기가 잘 혼합되어야 하며, 균일한 공급이 이루어져야 한다. 만약 불균일한 유동 분포가 발생하게 되면, 국부적인 고온 지역이 발생하게 되고 이는 촉매와 지지체에 손상을 초래하게 된다. 본 연구에서는 촉매 연소기의 혼합 및 유동 균일도를 향상시키기 위해 다공판을 사용하였으며, 다양한 파라메터의 변화에 따른 유동 특성의 변화를 조사하기 위해 수치적인 방법을 사용하였다. 각각의 조건하에서 촉매부의 입구에서 유동의 균일도를 조사하고 평가하였으며, 그 결과 적절히 설계된 다공판을 사용하였을 경우 대부분의 해석 조건에 대해 효과적인 균일도 향상을 나타냄을 확인할 수 있었다. A catalytic combustion is accomplished by the chemical reaction between fuel and oxidizer at the catalyst surface, different from conventional combustion. Therefore, it is important that the fuel and air stream are well mixed and supplied uniformly prior to the combustion region. If the flow is maldistributed, a hot spot may occur that can lead to subsequent catalyst and substrate damage. Therefore, in order to enhance the mixing and flow uniformity, in this study, the perforated plate is used. A numerical simulation is performed to investigate the variation of flow characteristics by changing various parameters. Under each condition, the uniformity of the flow stream at the entrance of the catalyst section is evaluated and compared. The results show that the uniformity can be effectively improved for most of the case by using the well-designed perforated plates.
허프 변환과 최소제곱법을 이용한 세라믹 영상에서의 결함 검출
홍동진(Dong-Jin Hong),차의영(Eui-Young Cha) 한국컴퓨터정보학회 2015 韓國컴퓨터情報學會論文誌 Vol.20 No.10
In this paper, we suggest a method of detecting defects by applying Hough transform and least squares on ceramic images obtained from non-destructive testing. In the ceramic images obtained from non-destructive testing, the background area, where the defect does not exist, commonly show gradual change of luminosity in vertical direction. In order to extract the background area which is going to be used in the detection of defects, Hough transform is performed to rotate the ceramic image in a way that the direction of overall luminosity change lies in the vertical direction as much as possible. Least squares are then applied on the rotated image to approximate the contrast value of the background area. The extracted background area is used for extracting defects from the ceramic images. In this paper we applied this method on ceramic images acquired from non-destructive testing. It was confirmed that extracted background area could be effectively applied for searching the section where the defect exists and detecting the defect.
퍼지 C-Means 클러스터링을 이용한 요부 초음파 영상의 양자화
홍동진(Dong-Jin Hong),김광백(Kwang-Baek Kim) 한국컴퓨터정보학회 2013 한국컴퓨터정보학회 학술발표논문집 Vol.21 No.1
본 논문에서는 초음파 영상에서 퍼지 C-Means 클러스터링을 이용한 양자화 기법을 제안한다. 제안된 방법은 초음파 영상에서 나타난 명암도를 이용하여 n개의 그룹으로 클러스터링한다. 그리고 각 클러스터의 중심 값을 기준으로 정렬한 뒤, 각 그룹에 지정된 색상을 요부 초음파 영상에서 나타낸다. 본 논문에서 제안하는 기법을 적용한 요부 초음파 영상과 일반적으로 자주 이용되는 히스토그램 기반 양자화 기법을 적용한 요부 초음파 영상을 비교하였을 때, 본 논문에서 제안하는 퍼지 C-Means 클러스터링을 이용한 양자화를 적용한 영상이 근육 내의 지방을 분석하는데 효과적인 것을 확인할 수 있었다.
MCFC 발전시스템용 촉매연소기의 연소 특성에 관한 실험적 연구
홍동진(Dong Jin Hong),안국영(Kook Young Ahn),김만영(Man Young Kim) 대한기계학회 2012 大韓機械學會論文集B Vol.36 No.4
MCFC 발전시스템에서 연소기는 연료극의 배가스 중에 포함된 미반응 가스를 연료로 사용하여 공기극에 H₂O와 CO₂ 농도가 높은 고온의 혼합가스를 공급하는 역할을 한다. 하지만 이러한 배가스는 가연한계 이하로 내려가게 되어 통상적인 연소방식에 의한 완전연소가 어렵기 때문에 이를 해결하기 위하여 촉매연소기를 사용한다. 완전연소 및 이에 다른 공해물질의 저감 특성에 따라 최근 촉매연소는 환경친화적인 연소방식으로 주목받고 있다. 따라서 본 연구에서는 MCFC 발전시스템의 BOP 시스템에 적용되는 촉매연소기에 대한 실험연구를 수행하였다. 본문에서는 실험장치를 설명한 후 촉매연소 시스템의 설계변수, 즉, H₂ 연료 첨가에 따른 연료조성, 유입가스의 온도, 과잉 공기비, 촉매의 종류, 그리고 시동 스케줄에 따른 촉매연소 특성을 고찰하였다. In the MCFC power generation system, the combustor supplies a high temperature mixture of gases to the cathode and heat to the reformer by using the off-gas from the anode; the off-gas includes high concentrations of H₂O and CO₂. Since a combustor needs to be operated in a very lean condition and avoid local heating, a catalytic combustor is usually adopted. Catalytic combustion is also generally accepted as one of the environmentally preferred alternatives for generation of heat and power from fossil fuels because of its complete combustion and low emissions of pollutants such as CO, UHC, and NOx. In this study, experiments were conducted on catalytic combustion behavior in the presence of Pd-based catalysts for the BOP (Balance Of Plant) of 5 ㎾ MCFC (Molten Carbonate Fuel Cell) power generation systems. Extensive investigations were carried out on the catalyst performance with the gaseous CH₄ fuel by changing such various parameters as H₂ addition, inlet temperature, excess air ratio, space velocity, catalyst type, and start-up schedule of the pilot system adopted in the BOP.