http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
장재수,고진현,하재권,김태현,박동철,김찬흥,Jang, Jae-Su,Ko, Jin-Hyun,Ha, Jae-Kwon,Kim, Tae-Hyun,Park, Dong-Chul,Kim, Chan-Hong 한국군사과학기술학회 2006 한국군사과학기술학회지 Vol.9 No.1
A rectangular loop antenna for S-band radar is proposed. The proposed loop antenna is the modified type of folded monopole antenna. The feeding line is coplanar stripline with $180^{\circ}$ phase difference for operating in odd mode. The proposed antenna showed return loss of -15.57dB at the center frequency and bandwidth of about 790MHz (> 25%) under the condition of VSWR < 2. The gains of single, 1x2, and 1x4 array loop antennas are 4.3, 7.0, and 10.2dBi, respectively.
광대역 기판 인쇄형 톱날구조를 갖는 모노폴 안테나 설계
김남기,고진현,하재권,이승엽,Kim Nan-Ki,Go Jin-Hyun,Ha Jae-Kwon,Rhee Seung-Yeop 한국전자파학회 2004 한국전자파학회논문지 Vol.15 No.10
본 논문에서는 안테나 방사부를 톱날의 모노폴 구조를 가지면서 이면(裏面)의 접지 면적을 변화시키는 임피던스 정합 방법을 적용하여 광대역 특성을 갖는 안테나를 제안한다. 제안된 안테나의 길이는 1/4 파장보다 작고, 대역폭은 2:1 VSWR의 범위에서 $89.6\%$, 0.8 GHz$\~$2.0 GHz에서의 안테나 이득은 -0.02 dBi$\~$2.54 dBi를 얻었으며 방사패턴은 모노폴 안테나와 유사한 패턴을 얻을 수 있었다. In this paper, we propose a printed monopole antenna called the saw tooth monopole antenna(STMA) with a very wide band. And impedance matching of the antenna for the wideband is achieved using a special matching structure to vary ground size of back plate. The proposed antenna is smaller than general $\lambda$/4 monopole antenna in size but provides a 2:1 VSWR bandwidth of about $89.6\%$. The radiation pattern is omni-directional at 0.8 GHz$\~$2.0 GHz with gain of about -0.02 dBi$\~$2.54 dBi.
박여일,고진현,하재권,박영주,박동철,Park, Yeo-Il,Ko, Jin-Hyun,Ha, Jae-Kwon,Park, Young-Joo,Park, Dong-Chul 한국전자파학회 2007 한국전자파학회논문지 Vol.18 No.8
In this paper, a broadband 4-way power divider which can be used from 20 MHz to 500 MHz in the V/UHF band is designed using transmission-line transformer and ferrite toroid. A 4:1 impedance transformer is realized and this 4:1 transformer is connected with bridge-type 2-way dividers to form a 4-way rower divider, Insertion loss of about 6.8dB, isolation of less than -20dB, and return loss of less than -15dB in most band of interest are measured. 본 논문에서는 V/UHF 대역인 $20{\sim}500 MHz$에서 동작하는 광대역 4분기 전력 분배기를 전송선 변환기와 페라이트 토로이드를 이용하여 설계하였다. 4:1 임피던스 변환기를 구현하였고, 이 4:1 변환기는 4분기 전력 분배기를 구현하기 위해 브리지 구조를 이용한 2분기 전력 분배기와 연결되었다. 구현된 4분기 전력 분배기는 요구대역 내에서 약 6.8dB의 삽입 손실, -20dB 이하의 격리도, -15dB 이하의 반사 손실 특성을 갖는 것으로 측정되었다.
위성 DMB와 ITS 서비스 수신을 위한 단일 급전 이중 대역 원형 패치 안테나 설계
김영상,노승진,김남수,고진현,하재권,Kim Young-Sang,Noh Seung-Jin,Kim Nam-Soo,Ko Jin-Hyun,Ha Jae-Kwon 한국전자파학회 2006 한국전자파학회논문지 Vol.17 No.9
본 논문에서는 단일 급전을 이용하여 위성 DMB(Digital Multimedia Broadcasting)와 ITS(Intelligent Transport Systems) 서비스를 수신할 수 있는 이중 대역 원형 패치 안테나의 구조를 제안하고, 실제 제작을 통하여 성능을 확인하였다. 제작한 이중 대역 안테나는 위성 DMB 대역과 ITS 대역에서 각각 90 MHz와 180 MHz의 -10 dB 대역폭을 갖고, 최소 반사 손실은 약 -35 dB와 -18 dB로 측정되었는데, 이는 시뮬레이션 결과와 잘 일치하였다. 그리고, 위성 DMB와 ITS 대역의 안테나 이득은 각각 2.3 dBi와 2.7 dBi를 얻었다. In this paper, we proposed and fabricated the single-feed dual-band circular patch antenna for S-DMB(Satellite-Digital Multimedia Broadcasting) and ITS(Intelligent Transport Systems) services. The manufactured dual-band antenna showed that the measured -10 dB bandwidth and the minimum return loss was 90 MHz and -35 dB for S-DMB, 180 MHz and -18 dB for ITS, respectively. It is noticed that the measured and the simulated results are agreed well. And the antenna gain of S-DMB and ITS has 2.3 dBi and 2.7 dBi, respectively.
높은 격리 특성을 갖는 이중 급전 방식 초소형 중계기용 안테나
성철민(Cheol-Min Seong),장재수(Jae-Su Jang),하재권(Jae-Kwon Ha),박동철(Dong-Chul Park) 한국전자파학회 2012 한국전자파학회논문지 Vol.23 No.6
본 논문에서는 이중 급전 방식을 적용하여 높은 격리 특성을 갖는 초소형 ICS(Interference Cancellation System) 중계기용 안테나를 설계하고, 제작 및 측정을 통하여 이를 검증하였다. 대역폭과 이득은 주방사 패치 및 전력분배기 근처의 스터브 길이, 그리고 기생 패치의 크기를 조정하여 최적하였다. 제작된 안테나는 3G 이동 통신 주파수인 1,920~2,170 ㎒ 대역에서 VSWR 2:1 미만, 이득은 7 ㏈i 이상, 격리도는 ?65 ㏈ 미만의 특성을 나타내었다. In this paper, a dual-fed small ICS repeater antenna with high isolation is designed, fabricated, and measured. Bandwidth and gain are optimized by changing the stub lengths near main patch and power divider, and also by changing the size of parasitic patch. To improve the isolation characteristic of the antenna, a dual-feeding method is applied in designing the antenna. The fabricated antenna has a VSWR less than 2, a gain over 7 ㏈i, and an isolation between the donor and the server antennas less than ?65 ㏈ from 1,920~2,170 ㎒ for 3G mobile communication.
다층 구조 빔 틸트 마이크로스트립 패치 배열 안테나 설계
하재권,박동철 충남대학교 공업교육연구소 2002 論文集 Vol.25 No.1
In this paper, the characteristics and the effects of the resonant frequency and beam pattern of the antenna which is coupled with parasitic patch are studied. A beam tilt microstrip patch array antenna using multi-layer structure is designed based on performance trade-offs between design parameters and fabricated by using the polyester based copper-clad laminates and foams instead of using the substrate which is thick and has low dielectric constant. The proposed H-plane coupled antenna, which is a 16×8 beam tilt microstrip patch array antenna for DBS reception by using the principle of the dipole Yagi antenna, has the non-radiation edge and broadside coupling. The peak beam of this fabricated antenna is directed 43.8˚from the broadside direction with the gain of 22.9 dBi and its half power beamwidth is about 4.6˚. The fabricated antenna received the DBS signal from the KOREASAT 3 very well by only adjusting the azimuth direction.