http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
메타 물질을 이용하여 소형화와 주파수 가변이 가능한 영차 공진 안테나
장영수(Youngsoo Jang),최재혁(Jaehyurk Choi),임성준(Sungjoon Lim) 한국전자파학회 2010 한국전자파학회논문지 Vol.21 No.8
본 논문에서는 주파수 가변이 가능한 영차 공진 안테나를 구현하였다. 제안된 안테나의 영차 공진 특성은 composite right/left-handed(CRLH) 전송 선로를 이용하여 구현하였고, 안테나의 소형화를 극대화하기 위해 버섯구조의 접지 평면에 사각 슬롯을 설계하였다. 또한, 주파수 가변을 위해 슬롯이 있는 접지 평면에 가변 소자를 삽입하였다. 슬롯이 있는 접지 평면에 위치한 가변 소자의 on/off 상태에 따라, CRLH 전송 선로의 병렬 인덕턴스 값을 변화시킴으로 인해 안테나의 공진 주파수가 바뀌게 된다. 실험 결과, 제안된 안테나의 공진 주파수는 4.92 ㎓에서 2.96 ㎓로 변했다. 한편, 제안된 안테나의 크기는 일반적인 반파장 패치 안테나보다 최대 94.24 % 크기를 감소시킬 수 있었다. In this paper, a frequency tunable zeroth-order resonant(ZOR) antenna has been implemented. The ZOR characteristics of the proposed antenna is realized by using a composite right-and left-handed(CRLH) transmission line which consists of a rectangular slot on the ground plane of a mushroom structured antenna in order to minimize the antenna size. In addition, the tunable devices are introduced on the slotted ground plane for frequency tuning capability. Depending on the on and off states of the tunable device on the slotted ground plane, a shunt inductance value of the CRLH transmission line is changed and its resonant frequency becomes tunable. From the experimental results, the resonant frequency of the proposed antenna is changed from 4.92 ㎓ to 2.96 ㎓. Additionally, the proposed antenna's size is reduced by 94.24 % compared with the half-wavelength patch antenna.
김유호(Youho Kim),장영수(Youngsoo Jang),최봉석(Bongsuk Choi),성원모(Wonmo Seong) 한국정보과학회 2008 정보과학회 컴퓨팅의 실제 논문지 Vol.14 No.9
RFID 시스템이 그 규모가 커짐에 따라 리더 충돌에 따른 인식률 저하 문제가 대두되고 있다. 시분할 기법을 사용하면 충돌문제를 해결할 수 있지만, 전체 인식시간은 늘어가게 된다. 이 문제는 RFID를 이용한 실시간 재고관리를 위해 해결해야만 한다. 본 연구에서는 ARCM(Anti Reader Collision Manager)을 RFID 시스템에 두어 전체 인식시간을 개선하였다. ARCM은 효율적인 주파수 채널 사용으로 짧은 인식시간을 가지며 리더가 간섭을 회피해 태그를 인식할 수 있도록 RFID시스템을 관리한다. ARCM을 사용한 결과, 기존의 시스템보다 최대20%정도의 시간을 절약할 수 있었다. As the scale of RFID systems grows, decrease in recognition rate of collision between readers is becoming an issue. Time division technique may solve the problem, but this will cause total recognition time to increase. This issue must be solved for real-time inventory control. In this study, total recognition time was improved by placing ARCM in RFID systems. ARCM maintains short recognition time through efficient utilization of frequency channel and manages RFID systems to recognize the tag by avoiding interference. As the result of using ARCM, saving maximum 20% of time was possible.