http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
이정동,이춘주,정경인,Lee, Jeong-Dong,Lee, Chun-Ju,Jung, Kyeong-In 한국국방경영분석학회 2005 한국국방경영분석학회지 Vol.31 No.2
Defense firms' excess profitability by shifting common overhead costs from non-defense sector to defense sector in the award of cost reimbursement type of defense contracts is a widespread conclusion in prior researches. In this paper, we reviewed cost-shifting incentives in defense-contracting firms and extended the analysis of McGowan and Vendrzyk(2002) by applying modified model to Korea Defense Contracts. We formulated six hypotheses to test the relation of cost-shifting and excess profitability regarding market openness, auditing system, ranking in defense contracts, and firm types(sole defense contractors, sole non-defense contractors, and defense and non-defense mixed contractors). But, we could not find any evidence that defense firms shifted costs from non-defense sector to defense sector for the period 1997-2002. The results suggest that the excess profitability of Korea defense firms may not be from the cost-shifting but from other reasons.
강국진,이춘주,김도현,Kuk-Jin Kang,Chun-Ju Lee,Do-Hyun Kim 대한조선학회 2001 大韓造船學會 論文集 Vol.38 No.3
본 논문에서는 2,500톤급 삼동형 호위구축함의 선형설계와 저항추진특성에 대한 연구 결과를 보인다. 보조선체의 형상과 그 설치 위치가 삼동선의 저항성능에 미치는 영향을 파악하기 위하여 일련의 저항시험과 수치계산을 수행하였다. 그리고 삼동선의 추진효율을 조사하기 위하여 추진시험을 수행하였으며, 실선 크기에서 삼동선과 유사 단동선들의 저항추진성능을 비교하였다. 본 연구를 통하여 보조선체의 길이 방향 위치가 삼동선의 저항특성에 큰 영향을 미치며, 보조선체의 형상과 폭 방향의 위치는 그 영향이 작은 것을 알 수 있었다. 보조선체의 중심이 길이 방향으로 주선체의 선수나 선미 가까운 곳에 설치될 때 삼동선의 저항성능이 우수한 결과를 보였는데, 이는 주선체로부터 생성된 가장 큰 선수파의 파저에 보조선체의 선수가 놓이는 곳이다. 그리고, 삼동선의 저항추진성능은 유사 단동선에 비하여 중속 이상의 구간에서 우수한 결과를 보였다. This paper presents the results of hull form design and powering performance for a 2.500 ton class trimaran frigate. A series of resistance tests and numerical calculations have been conducted to figure out the influences of side-hull form and position on the resistance characteristics of the trimaran. And the propulsion test was conducted to investigate the propulsion efficiency of the trimaran, and the powering performance of the trimaran was compared with that of the similar mono-hull ships in full scale. From the research it was found that the longitudinal position of side-hull had a large influence on the resistance characteristics of the trimaran while the side-hull form and transverse position had a small influence on it. The trimaran showed favorable resistance performance when the side-hull was located near the stern of trimaran, which was resulted from the fact that the side-hull stem was located near the primary wave hollow generated by the main hul1. The powering performance of the trimaran was superior to that of the similar mono-hull ships above the middle speed range.
빙해수조 모형빙판의 두께 계측과 유효탄성계수용 특성길이 연구
이재환,최봉균,이춘주,Lee, Jae-Hwan,Choi, Bong-Kyun,Lee, Chun-Ju 한국전산구조공학회 2014 한국전산구조공학회논문집 Vol.27 No.5
본 논문에서는 국내 선박해양플랜트연구소에 구축된 빙해수조의 빙특성 중에서 모형빙의 두께와 유효탄성계수 산출과정이 소개되었다. 수조에서 결빙되는 빙판은 크기가 가로 세로각각 30 m 정도에 두께는 40mm정도이다. 모형선의 실험결과를 쇄빙선 설계에 사용하기 위하여 빙 특성 정보가 필요하다. 사람이 빙판을 일부 절개하고 일일이 손으로 두께를 측정하는 것을 지양하기 위하여 초음파 기기를 사용하였는데 저주파 장비를 사용하여 작은 샘플 모형빙에 대한 두께는 계측되었다. 하지만 완벽한 계측을 위해서는 송수신 일체형 저주파 센서나 정확한 위치가 설정된 분리형 센서 혹은 고가의 특수 장치가 필요함을 확인하게 되었다. 한편 빙판의 처짐량을 간이식 LVDT로 계측하고 이를 탄성체 위에 놓인 무한 판의 특성길이 관계식에 대입하여 빙의 유효탄성계수를 산출하였는데 외국의 결과와 유사함이 입증되었다. The model ice is created at KRISO (Korea Research Institute for Ships and Ocean Engineering) ice basin where model ship is tested to obtain the necessary data in order to design the ice breaking vessels and ocean structures operating in the northern pole sea area. Through the model ship test, ice breaking, clearing, ice-ship and ice-propeller interaction behavior can be obtained. Since mechanical properties of ice plate are required for the model test, some tests are performed to obtain the properties in this paper. First, ultrasonic devide is used to measure the thickness of the model ice plate and the results show the possibility of using ultrasonic method, yet more sophisticated device or special sensors are required to measure the ice thickness completely. And the defection of ice plate is measured using LVDT to compute the characteristic length of ice plate on the fluid, which is used to get the effective Young's modulus of model ice.