http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
The Development of the Foundation of Offshore Wind Turbines
박현철,Shi,Wei,Hyunchul Park 한국신재생에너지학회 2008 한국신재생에너지학회 학술대회논문집 Vol.2008 No.10
Offshore wind farms will contribute significantly to the renewable generation of electricity for the world. The economic development of wind farms depends, however, on development of efficient solutions to a number of technical issues, one of these being the foundations for the offshore turbines. We review here the results of recent research for wind turbine foundations. Also it is a short overview of some of the challenges facing the growth of offshore wind energy foundation technology.
다중-채널 및 다중-웨이 반도체 디스크를 위한 플래시 변환 계층
박현철(Hyunchul Park),신동군(Dongkun Shin) 한국정보과학회 2009 정보과학회 컴퓨팅의 실제 논문지 Vol.15 No.9
플래시 메모리는 전력 소비가 적고 처리속도가 빨라 임베디드 시스템의 저장 매체로서 많은 연구가 이루어져왔다. 특히, 최근에는 플래시메모리로 구성된 반도체 디스크(Solid state disk, SSD)가 하드디스크를 점점 대체하고 있는 추세이다. 현재 SSD는 성능을 높이기 위해서 병렬성을 이용한 다중채널과 다중웨이를 사용하고 있다. 이 구조에서는 연속된 여러 개의 블록들로 구성된 슈퍼블록단위로 플래시 메모리에 기록하게 된다. 본 논문은 병렬처리를 최적화하기 위해 SSD의 버퍼를 비울 때 희생 슈퍼블록을 선정하고 재구성하는 방법을 제안하고 있다. 실험을 통해서 희생 슈퍼블록 선정 방법을 바꾸는 것으로 슈퍼블록단위의 쓰기 횟수를 35% 줄일 수 있고, 슈퍼블록 구성 방법을 달리하여 9%를 추가적으로 더 줄일 수 있었다. Flash memory has several features such as low-power consumption and fast access so that there has been various research on using flash memory as new storage. Especially the Solid State Disk which is composed of flash memory chips has recently replaced the hard disk. At present, SSD adopts the multi-channel and multi-way architecture to exploit advantages of parallel access. In this architecture, data are written on SSD in a unit of a superblock which is composed of multiple blocks in which some blocks are put together. This paper proposes two schemes of selecting, segmenting and re-composing victim superblocks to optimize concurrent processing when a buffer flush occurs. The experimental results show that 35% of superblock- based write operations is reduced by selecting victims and additional 9% by composition of superblock.
박현철(Hyunchul Park),강홍식(Hongsig Kang),선석윤(Seokyoun Sun),박종서(Jongseo Park),안광국(Kwangkuk Ahn) 한국지반환경공학회 2017 한국지반환경공학회논문집 Vol.18 No.2
해양 매립 공사는 해저의 해성점토를 해수와 함께 준설하여 매립지로 이동시켜 매립지를 형성시키는 공사이다. 매립지가 형성되는 과정에서 준설토는 침강-퇴적-압밀 과정이 진행되며 이 과정에서 압밀과정은 소요되는 시간과 침하량이 크기 때문에 매립지를 계획하는 해양 매립 공사에서 매우 중요한 결정인자로 사용하게 된다. 준설토의 침하량과 소요되는 시간을 예측하기 위한 방법으로 국내에선 Yano가 제안한 Column 실험이 보편적으로 사용되고 있다. 그러나 Yano의 Column 실험은 준설토의 침강압밀특성을 확인하기 위해 장시간이 필요한 단점이 있다. 따라서 본 연구에서는 장시간이 소요되는 Column 실험의 단점을 보완해 단시간에 준설토의 침강압밀특성을 확인하기 위한 방법으로 원심모형실험을 활용하였다. 그 결과 효율적으로 준설토의 침강압밀특성을 확인하기 위해 원심모형실험을 활용할 수 있는 것으로 사료된다. The costal reclamation construction is for making reclaimed land by dredging marine clay with seawater, and then bringing the dredged soil into the reclaimed land. During the process, the dredged soil in the reclaimed land undergoes the sedimentationconsolidation process. Among the processes, the consolidation is a very critical factor when planning reclaimed land because of its requiring time and settlement. In order to predict the requiring time and settlement, the Column test, which was suggested by Yano, has been usually used in the nation. However, the test method needs a very long time to identify the characteristic of sedimentationconsolidation of dredged soil. Therefore, in this study, in order to supplement the weakness of the Column test which needs such a long time, and in order to identify the characteristic of the sedimentation-consolidation for dredged soil in a short time, the Geo-centrifuge test was examined as an alternative method. The result considered that Geo-centrifuge test would be useful to identify the characteristic of sedimentation-consolidation for dredged soil efficiently.
박현철(Hyunchul Park),문용준(Yongjun Moon),박대종(Daejong Park),권세진(Sejin Kwon) 대한기계학회 2012 대한기계학회 춘추학술대회 Vol.2012 No.11
The tire pressure monitoring system (TPMS) market is rapidly growing with legislation making TPMS installation obligatory among automotive developed countries?i.e., Japan, EU, and Korea?in 2012, after the same bill progressed in the USA in 2007. So far, TPMS research is mostly concentrated in the ultralow-power circuit field. However, one of the biggest challenges is overcoming the unavoidable replacement of batteries owing to the self-discharging, unstable performance, etc. of the batteries. Energy-harvesting technology is the only candidate to substitute battery technology. Energy harvesters are modules that generate electric power to operate sensing nodes by gathering wasted energy in the surrounding area. There were two core questions for the key challenges examined in this study: “Which energy source do we use?” and “How much energy do we generate?” The answers would be the design constraints included with the suggested volume of energy harvester.