http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
WC-Co계 미세조직에 따른 CVD 다이아몬드 코팅막의 접착력 변화
이동범,채기웅,Lee, Dong-Beum,Chae, Ki-Woong 한국세라믹학회 2004 한국세라믹학회지 Vol.41 No.10
평균입자크기가 서로 다른 WC-Co계 모재위에 고온 열처리법과 화학적 에칭방법을 이용하여 다이아몬드 막을 코팅하고 압흔법을 통해 그 접착력(adhesion strength)을 평가하였다. $1450^{\circ}C$의 고온 열처리 방법에 의해 준비된 WC-Co 시편표면에서는 WC 입자가 성장하였으며, 그 결과 20$\mu$m 이상의 다이아몬드 막이 증착된 경우에도 100kg의 하중에서도 우수한 접착력이 얻어졌다. 그러나, 모재 표면입자의 과도한 입성장으로 시편 인선부에는 변형이 발생하였으며, 증착된 다이아몬드 막은 거친 표면조도를 보였다. 이와 비교하여, 화학적 부식의 경우에는 submicron 크기의 WC 입자를 제외하고, 2$\mu$m 이상의 WC 입자를 가지는 모재를 이용하여 10$\mu$m의 다이아몬드 코팅막을 증착시킨 경우에는, 60kg의 하중에서도 양호한 접착력이 유지되었다 특히, WC 입자가 클수록 접착력의 신뢰성이 대폭 향상되었다. 이는 수 $\mu$m 이내의 비교적 얇은 두께의 다이아몬드 막을 증착하는 경우 화학적 에칭방법이 시편 형상의 변형을 방지하고, 양호한 표면조도를 얻을 수 있어 고온 열처리 방식에 비해 효과적임을 의미한다. The effect of microstructure of WC-Co substrates which have different WC grain sizes from submicron to 5 $\mu$m on the diamond-substrate adhesion strength was investigated. The substrates were pre-treated by two methods : chemical etching with Murakami's solution and subsequently with $H_2SO_4$, and thermal heat-treatment. The adhesion strength was estimated by degree of peeling after Rockwell indentation. Diamond films of 20 $\mu$m thickness deposited on the heat-treated substrates showed an excellent adhesion strength at the load of 100 kg, which ascribed to the large and elongated WC grains. However, the cutting edge of insert was deformed after heat treatment and the surface morphology of heat treated substrate strongly affected on the surface roughness of the deposited diamond films. On the contrary, the diamond film of 10 $\mu$m in thickness on the chemically etched substrates of average WC grain size over 2 $\mu$m showed good adhesion strength enough not to peel-off under a load of 60 kg. Especially, the substrate of average WC grain size over 5 $\mu$m exhibited much improved reliability of adhesion comparing with the substrate of average grain size under 2 $\mu$m. No substrate deformation was observed in this case after the chemical etching, which is more advantageous and more practical in terms of precious machining than the heat treatment case.
이동범,하철주,김명진,김강윤,최호춘,Lee, Dong-Beom,Ha, Cheol-Ju,Kim, Myeong-Jin,Kim, Gang-Yun,Choe, Ho-Chun 대한산업보건협회 2003 산업보건 Vol.184 No.-
본 분석기법은 유해인자별 작업환경측정 및 특수건강진단 시료를 분석할 때 간편하게 활용할수 있는 방법으로 산업보건관련 유관기관에 실질적인 도움을 주고자 합니다. 이 분석기법들 중에는 공식적으로 검증, 채택되지 아니한 기법이 있음을 알립니다.
6-Aminonicotinamide을 투여한 메추리의 혈액에서의 형태학적 및 생화학적 변화
이동범,김태전,나동진 임상병리검사과학회 2001 임상병리검사과학회지 Vol.33 No.2
Effects of neurotoxin 6-aminonicotinamide (6-AN) on the morphological and biochemical changes in blood cells of Japanese quail were investigated. 6-AN stimulated the multiple appearance of tear drop cells and several blast cells such as pronormoblast, basophilic normoblast and polychromatophilic normoblast. In addition, the numbers of red blood cell, white blood cell and hemoglobin were severely reudced. In white blood cell, mother cells like myeloblast and promyelocyte were distinctively produced. Therefore, 6-AN appeared to interfere with the hematopoiesis occurring in the bone marrow. In the serum, the levels of total proteins and albumin were not affected, but the levels of globulin were significantly lower than those of the control and pair-fed groups. In contrast, the levels of glucose and total cholesterol were significantly elevated. The activity of aspartate aminotransferase and creatine phosphokinase were significantly higher than that of the control and pair-fed groups. The activity of lactate dehydrogenase of the 6-AN and pair-fed groups were higer than that of the control group. The result suggest that 6-AN may interfere with the proper maintenance of energy charges.