http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
In Seob Kwak,Yeoung-Sang Yun,원성욱,Sun Beom Choi,Juan Mao,김석,정봉우,윤영상 한국화학공학회 2011 Korean Journal of Chemical Engineering Vol.28 No.3
The removal and recovery of nickel(II) from wastewater of an electroplating factory was investigated using the waste Escherichia coli biomass as the biosorbent. The results were compared with those from using Amberlite IRN-150 as a commercial sorbent resin. The resin showed better performance with a qmax value of 30.48 mg/g compared to 26.45 mg/g for the biomass, as predicted by the Langmuir isotherm model. Kinetic experiments revealed that the biosorption equilibrium was attained within 15 min. In the recycling of the sorbents, the desorption of nickel(II) from Amberlite was only 50%, which is too low for the adsorption performance of the resin to be maintained at an economic level in subsequent cycles. In contrast, the biomass exhibited reasonable adsorption-desorption performance over three repeated cycles. The capability for repeated use of the sorbent over several cycles and for recovery of the metal ions is the main advantage of the waste biomass.
Polysulfone-Escherichia Coli Biomass Composite Fiber에서 아민기의 메틸화가 염기성 염료의 제거에 미치는 영향
박하늘(Ha Neul Park),최한아(Han A Choi),김석(Sok Kim),윤영상(Yeoung-Sang Yun),원성욱(Sung Wook Won) 한국청정기술학회 2015 청정기술 Vol.21 No.3
본 연구에서는 polysulfone과 Escherichia coli biomass의 현탁액을 방사하여 입상화한 PS-E. coli biomass composite fiber(PSBF)와 PSBF에 존재하는 아민기를 메틸화시킨 amine-methylated PSBF (AM-PSBF)를 제조하였다. PSBF와 AM-PSBF에 의한 염기성 염료 Basic Blue 3 (BB3)의 흡착특성을 비교함으로써 아민기의 메틸화가 BB3의 흡착에 미치는 영향을 확인하였다. pH edge 실험에서는 두 흡착제 모두 pH가 증가할수록 BB3 흡착량이 증가하는 경향을 보였고, 동일 pH에서 AM-PSBF가 PSBF보다 높은 흡착량을 나타내었다. PSBF와 AM-PSBF 모두 흡착평형은 5시간 이내에 도달하였으며, 흡착속도론 실험데이터는 유사 1차 속도 모델식으로 잘 묘사되었다. 그리고 Langmuir 모델에 따르면, pH 8에서 AM-PSBF의 최대흡착량은 28.9 ㎎/g로 PSBF의 최대흡착량인 20.7 ㎎/g보다 약 1.4배 증가하였다. 이 결과로부터 PSBF에서 아민기의 메틸화는 염기성 염료의 흡착을 향상시키는 효과가 있음을 알 수 있다. 또한, 탈착실험 결과는 AM-PSBF가 반복적으로 재사용 될 수 있음을 보여주었다. In this study, polysulfone-Escherichia coli biomass composite fiber (PSBF) was prepared by spinning the suspension of PS and E. coli biomass and amine-methylated PSBF (AM-PSBF) was fabricated through the methylation of amine groups in PSBF. As comparing the adsorption characteristics of basic dye, Basic Blue 3 (BB3) by the PSBF and AM-PSBF, the effect of the methylation of amine groups on BB3 adsorption was confirmed. pH edge experiments showed that the BB3 uptake of PSBF and AM-PSBF increased as pH was increased and the BB3 uptake of AM-PSBF was higher than that of PSBF at the same pH. Both of PSBF and AM-PSBF was reached at equilibrium within 5 h and kinetic experimental data were well fitted by the pseudo-firstorder kinetic model. By the Langmuir model, the maximum adsorption capacities of PSBF and AM-PSBF at pH 8 were evaluated to be 28.9 and 20.7 ㎎/g, respectively. The maximum adsorption capacity of AM-PSBF was enhanced 1.4 times comparing that of PSBF. These results indicate that the methylation of amine groups in PSBF leads to the improvement of BB3 adsorption capacity. In addition, the results of desorption experiments revealed that AM-PSBF was repeatedly reusable.
화학적으로 변형된 하수슬러지를 이용한 반응성염료의 생물흡착
한민희(Min Hee Han),최기욱(Gi-Wook Choi),윤영상(Yeoung-Sang Yun) 한국청정기술학회 2007 청정기술 Vol.13 No.3
생물흡착은 염색폐수로부터 염료를 제거하기 위한 기술로서 현재 사용되고 있는 기술을 대체할 수 있는 유망한 처리 방법이다. 본 연구에서는 생물흡착제로써 저가이면서 풍부한 소재중의 하나인 하수 슬러지를 이용하였다. 본 연구의 목적은 바이오매스의 변형을 통하여 흡착능력을 향상시키는데 있다. FT-IR 분석과 적정 실험을 통하여 흡착에 관여하는 작용기는 카르복실 그룹, 인산 그룹, 아민 그룹으로 판명하였으며 그 중에서 반응성 염료(Reactive Red 4, RR 4)를 흡착할 수 있는 작용기는 아민 그룹임을 알 수 있었다. 또한 음이온성 염료인 RR 4의 흡착을 저해하는 것으로 생각되는 카르복실 그룹을 제거함으로써 흡착성능을 향상시킬 수 있었다. 그 결과, 카르복실 그룹이 제거된 바이오매스의 최대 흡착량이 변형 전에 비해 pH 2에서는 130%, pH 4에서는 210% 증가하였다. 그러므로 화학적으로 변형시킨 하수 슬러지는 산업폐수내 염료제거에 효과적이면서 값싼 생물흡착제로 이용될 수 있을 것으로 기대된다. Biosorption is considered to be a promising alternative to replace the present methods for the treatment of dye-containing wastewater. In this study, sewage sludge was used as a biosorbent which could be one of the cheapest and most abundant biomaterials. The objective of this work is to develop a surface-modified biosorbent with enhanced sorption capacity and binding affinity. The FT-IR and potentiometric titration studies revealed that carboxyl, phosphateand amine groups played a role in binding of dye molecules. The binding sites for reactive dye Reactive Red 4 (RR 4) were identified to be amine groups present in the biomass. In this work, based on the biosorption mechanism, the performance of biosorbentcould be enhanced by the removal of inhibitory carboxyl groups from the biomass for practical application of the biosorbents. As a result, the maximum capacity of biomass was increased up to 130% and 210% of the increment of sorption capacity at pH 2 and 4, respectively. Therefore, chemically modified sewage sludge can be used as an effective and low-cost biosorbent for the removal of dyes from industrial discharges.