http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
안정한 반응성 및 특수 기능성을 가진 티타늄 전구체의 제조 및 특성 분석
김욱현,구상만 한국공업화학회 2016 한국공업화학회 연구논문 초록집 Vol.2016 No.0
티타니아는 현재 고굴절안료, 광촉매, 반도체 혹은 화장품의 원료 등 다양한 산업분야에서 사용되는 광물질이다. 시장에서 유통되는 대부분의 티타니아는 염소법으로 얻은 염화티탄 1500K 이상의 고온에서 산화하여 얻는다. 이 생산공정은 염화티탄을 전구체로 하기에, 부산물인 염소가스를 제거하기 위한 제산시설이 요구되며, 고온공정이 진행되기에 생산단가가 높아지는 단점이 있다. 또한 크기가 일정한 나노미터 수준의 입자는 만들 수 없고, 표면이 비활성화 되어 특수한 기능성을 지닌 티타니아를 합성할 수 없기에 반응조건 개선, 표면개질 등이 요구된다. 따라서 티타늄에 염소가 아닌 리간드가 배위된 전구체를 합성한다면 보다 안전한 조건에서, 작은 크기의 기능성을 지닌 티타니아를 제조할 수 있다. 본 발표에서는 염화티탄에서 염소를 제거하고, 알콕시/β-케토네이트와 같은 위험성이 낮은 혹은 기능성을 가진 리간드와 배위한 새로운 티타늄 전구체를 합성하고 분석하였다. 새 전구체가 지닌 특성을 파악하여 알맞은 산화방법을 통해 티타니아를 합성하고, 이를 분석하여 제조된 티타니아가 특수한 기능성을 가지고 있는지 확인하였다.
김욱현,우제욱,전주영,Kim, Ukhyun,Woo, Jewook,Jeon, Jooyoung 한국전기전자학회 2022 전기전자학회논문지 Vol.26 No.3
In this paper, a two-stage single-ended power amplifier (PA) with broadband gain characteristics was presented by utilizing a radio frequency (RF) transformer (TF), which is essential for a differential amplifier. The bandwidth of a PA can be improved by designing TF to have broadband characteristics and then applying it to the inter-stage matching network (IMN) of a PA. For broadband gain characteristics while maintaining the performance and area of the existing PA, an IMN was implemented on an monolithic microwave integrated circuit (MMIC) and a multi-layer printed circuit board (PCB), and the simulation results were compared. As a result of simulating the PA module designed using InGaP/GaAs HBT model, it has been confirmed that the PA employing the proposed design method has an improved fractional bandwidth of 19.8% at a center frequency of 3.3GHz, while the conventional PA showed that of 11.2%.
김욱현,이미선,손진우,Kim, W.H.,Lee, M.S.,Sohn, J.W. 한국전자통신연구원 1993 전자통신동향분석 Vol.8 No.3
인간이 외계로부터 정보를 입수하는 경로는 사각기관 이외에 청각, 촉각 등 여러 감각기관이 있으나, 시각기관을 통하여 입수하는 정보가 전체 정보량의 70% 이상이라고 한다. 이와 같이 시각기관을 통하여 이루어지는 정보처리 결과는 우리 인간의 의사 결정에 크나큰 비중을 차지하고 있다. 본 고에서는 우리 인간을 비롯, 고등동물의 안구와 대뇌 시각피질의 시각계에서 일어나고 있는 시각정보처리 메카니즘에 대해서 소개하고자 한다.
김욱현,성시준,우성호 한국공업화학회 2014 한국공업화학회 연구논문 초록집 Vol.2014 No.1
A simple method was developed to tune the work function (WF) of indium tin oxide (ITO) cathode in inverted polymer solar cells (PSCs) by inserting a poly(diallyldimethylammonium chloride) (PDDAC) nanolayer as an electron collecting layer (ECL). The WF of ITO is dramatically reduced by dipole formation between the cationic amine of the PDDAC and the anionic oxygen of ITO. A reduction of ITO WF leads to improved electron selectivity. As a result, all solar cell parameters including short circuit current density, open circuit voltage and fill factor are improved, leading to the power conversion efficiency of 2.64% for P3HT:PC71BM active systems under AM1.5G illumination, which is significantly higher than that of the control inverted PSC with blank ITO and comparable to that of the control inverted PSC with ZnO ECL. The results provide an efficient method for interface engineering in organic-based optoelectronic devices.
Synthesis of titanium precursors for titania nanoparticles
김욱현,구상만,이정규 한국공업화학회 2015 한국공업화학회 연구논문 초록집 Vol.2015 No.0
Titania nanoparticles widely used in cosmetics, high refractive index pigments, photocatalysts, semiconductors and other industrial areas. However the instabilities of typical titanium precursor, such as TiCl4 and Ti(OR)4, cause rapid hydrolysis and condensation in aqueous solution, therefore resulting irregular size and morphology of prepared titania nanoparticles. In this presentation, various titanium precursors which are stable in aqueous solution were synthesized with the reaction of TiCl4 or Ti(OR)4 and ligands, and titania nanoparticles were prepared using the titanium precursors. The resulting titanium precursors and nanoparticles were characterized by spectroscopic analysis.