http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Analytical Models to Predict Power Harvesting with Piezoelectric Transducer
Raghava Raju Muppala,K. Padma Raju,Nam Mee Moon,Baek Ho Jung 한국전자파학회JEES 2008 Journal of Electromagnetic Engineering and Science Vol.8 No.1
Advances in low power design open the possibility to harvest energy from the environment to power electronic circuits. Electrical energy can be harvested from piezoelectric transducer. Piezoelectric materials can be used as mechanisms to transfer mechanical energy usually vibrating system into electrical energy that can be stored and used to power other devices. Micro- to milli-watts power can be generated from vibrating system. We developed definitive and analytical models to predict the power generated from a cantilever beam attached with piezoelectric transducer. Analytical models are pin-force method, enhanced pin-force method and Euler-Bernoulli method. Harmonic oscillations and random noise will be the two different forcing functions used to drive each system. It has been selected the best model for generating electric power based upon the analytical results obtained.
Sirangi, Subash,Jogam, Phanikanth,Nemali, Gandhi,Ajmeera, Ragan,Abbagani, Sadanandam,Raju, Vatsavaya S. The Korean Society of Plant Biotechnology 2020 JOURNAL OF PLANT BIOTECHNOLOGY Vol.47 No.4
The genetic diversity of two subpopulations of Corynandra chelidonii, one of terrestrial and the other of aquatic environments, was measured with molecular markers, such as start codon targeted (SCoT), inter simple sequence repeats (ISSR), and random amplification of polymorphic DNA (RAPD). The traditional morphological traits such as habitat, habit, leaf morphology, the colour of the sepals and petals, number of stamens, and seed morphology formed the base for their realization as two varieties, C. chelidonii var. pallae and C. chelidonii var. chelidonii. The polymorphism between the two variants was 100% with the primers SCoT-2 and OPA-1 and 4, while maximum polymorphism was detected with ISSR-2, SCoT-3, and OPA-3. The study used, for the first time, more than one molecular marker to assess the genetic variation underscoring the morphological variation in Corynandra chelidonii (L.f.) Cochrane & Iltis. The study justifies the recognition of the two subpopulations of Corynandra chelidonii from aquatic and terrestrial environments as two distinct varieties, C. chelidonii var. pallae (Reddy & Raju) V.S.Raju and C. chelidonii var. chelidonii, respectively, based on the traditional taxonomic evidence.
Raju, Kati,Kim, Seyoung,Hyung, Choi Jae,Yu, Ji Haeng,Seong, Young-Hoon,Kim, Soo-Hyun,Han, In-Sub Elsevier 2019 CERAMICS INTERNATIONAL Vol.45 No.1
<P><B>Abstract</B></P> <P>In this paper, we report on the selection of an optimal sintering temperature for Ce<SUB>0.9</SUB>Gd<SUB>0.1</SUB>O<SUB>2−δ</SUB>–La<SUB>0.6</SUB>Sr<SUB>0.4</SUB>Co<SUB>0.2</SUB>Fe<SUB>0.8</SUB>O<SUB>3–δ</SUB> composites through characterization of their microstructural, mechanical, and elastic properties. For this selection, sintering was performed mainly at three different temperatures—1100, 1250, and 1400 °C—for 3 h. The samples were systematically investigated in terms of their relative density, microstructure, flexural strength, hardness, elastic modulus, and Poisson's ratio. An increase in density with an increase in sintering temperature was observed to cause a significant improvement in the flexural strength, hardness, and elastic modulus. However, an excessively high temperature (>1250 °C) was detrimental to the flexural strength and hardness because of the occurrence of grain growth. The optimal sintering temperature was identified to be 1250 °C from an analysis of samples with superior mechanical properties and adequate elastic properties. The optimal flexural strength and hardness were found to be 211 ± 21 MPa and 9.34 ± 0.5 GPa, respectively, at room temperature.</P>
Raju, G. Seeta Rama,Pavitra, E.,Bharat, L. Krishna,Rao, Gattupalli Manikya,Jeon, Tae-Joon,Huh, Yun Suk,Han, Young-Kyu Elsevier 2018 CERAMICS INTERNATIONAL Vol.44 No.12
<P><B>Abstract</B></P> <P>Upconversion Sr<SUB>2</SUB>(Gd<SUB>.98-<I>x</I> </SUB>Er<SUB>.02</SUB>Yb<SUB> <I>x</I> </SUB>)<SUB>8</SUB>Si<SUB>6</SUB>O<SUB>26</SUB> (SGSO:2Er<SUP>3+</SUP>/<I>x</I>Yb<SUP>3+</SUP>) phosphor materials were synthesized using a citrate sol-gel process. X-ray diffraction patterns confirmed their hexagonal structure. Field emission scanning electron microscopy images of SGSO:2Er<SUP>3+</SUP>/<I>x</I>Yb<SUP>3+</SUP> phosphors depicted submicron particles. The enhanced upconversion luminescence properties of SGSO:2Er<SUP>3+</SUP>/<I>x</I>Yb<SUP>3+</SUP> phosphors were analysed as a function of Yb<SUP>3+</SUP> ion concentration and laser power. The energy transfer induced enhanced emission of the Er<SUP>3+</SUP>/ Yb<SUP>3+</SUP> ions co-doped SGSO phosphors was ascribed to multi-phonon relaxation. The calculated chromaticity coordinates of the SGSO:2Er<SUP>3+</SUP>/<I>x</I>Yb<SUP>3+</SUP> phosphors showed emissions could be tuned by changing Yb<SUP>3+</SUP> ion concentration. Optimized sample exhibited the chromaticity coordinate values near to the ultra-high definition television standard green emission coordinates.</P>
Raju, M.V.L.N.,Devegowda, G. Asian Australasian Association of Animal Productio 2002 Animal Bioscience Vol.15 No.7
In vitro binding efficacy of esterified glucomannan (E-GM) (0.1%) on aflatoxin B1 (AF) (300 ppb), ochratoxin A (OA) (2 ppm) and T-2 toxin (T-2) (3 ppm), when present alone or in combination, was evaluated in toxin-contaminated feed at pH 4.5 and 6.5. Esterified glucomannan showed significantly (p<0.01) higher binding with AF (81.6%), whereas those recorded with T-2 (27.8%) and OA (25.6%) were moderate. Binding of each toxin decreased as the number of toxins in feed increased. pH of medium showed no effect on mycotoxin binding ability of E-GM. A $2{\times}2{\times}2{\times}2$ factorial experiment of 5 week duration was conducted to study the effects of two dietary levels each of AF (0 and 300 ppb), OA (0 and 2 ppm), T-2 (0 and 3 ppm ) and E-GM (0 and 0.1%) on the immune competence of a total of 960 day-old commercial broilers. Reductions in size of thymus (by AF and T-2) and bursa (by AF) and antibody titers against Newcastle disease and Infectious Bursal disease (by all the toxins) were noted. Additive and antagonistic interactions were seen among the toxins on certain parameters. Esterified glucomannan significantly (p<0.01) improved antibody titers and weights of bursa ofFabricius and thymus indicating its counteracting efficacy against immunosuppression in mycotoxicosis of multiple origin.
Evaluation of Factors for Effective Distribution of Covid-19 Vaccines
RAJU Totakura Bangar,CHAKRABARTI Deepankar,DAS Neenu,MATHUR Ravi Prakash 한국유통과학회 2022 유통과학연구 Vol.20 No.7
Purpose: The government of India has initiated the Covid-19 Vaccination drive from early January 2021. Vaccination is identified to be best option to protect the people across the globe. However, owing to fast wide spread of the Covid-19, the Vaccine Distribution is a major challenge owing various issues like temperature control, infrastructure, hesitancy, geographical diversity, and other critical factors. Various research is carried out globally to understand and study the Vaccine Distribution issues based on the respective country issues and factors. Research Design, Data, and Methodology: This research paper attempts to explore prominent factors that could be taken up on priority for better and effective vaccination program. The study tries to rank various factors and sub-factors affecting vaccine distribution in India. AHP methodology based on feedback from 22 experts from the Vaccine industry has been deployed to get the desired results. Result: The results show that factors vaccine approval process, geographical prioritization, power supply, infrastructure maintenance costs for vaccine storage, and vaccine pricing are the prominent factors of effective vaccination in the country. Conclusion: The role and need for district-level health officers towards vaccine storage has been brought forward. A long-term effective vaccination policy is needed for optimum vaccine distribution.
Performance of non-prismatic simply supported prestressed concrete beams
Raju, P. Markandeya,Rajsekhar, K.,Sandeep, T. Raghuram Techno-Press 2014 Structural Engineering and Mechanics, An Int'l Jou Vol.52 No.4
Prestressing is the most commonly employed technique in bridges and long span beams in commercial buildings as prestressing results in slender section with higher load carrying capacities. This work is an attempt to study the performance of a minimum weight prestressed concrete beam adopting a non-prismatic section so that there will be a reduction in the volume of concrete which in turn reduces the self-weight of the structure. The effect of adopting a non-prismatic section on parameters like prestressing force, area of prestressing steel, bending stresses, shear stresses and percentage loss of prestress are established theoretically. The analysis of non-prismatic prestressed beams is based on the assumption of pure bending theory. Equations are derived for dead load bending moment, eccentricity, and depth at any required section. Based on these equations an algorithm is developed which does the stress checks for the given section for every 500 mm interval of the span. Limit state method is used for the design of beam and finite difference method is used for finding out the deflection of a non-prismatic beam. All the parameters of nonprismatic prestressed concrete beams are compared with that of the rectangular prestressed concrete members and observed that minimum weight design and economical design are not same. Minimum weight design results in the increase in required area of prestressing steel.