Self-powered reduced-dimensionality perovskite photodiodes with controlled crystalline phase and improved stability

Lim, Ju Won,Wang, Huan,Choi, Chi Hun,Kwon, Hannah,Quan, Li Na,Park, Won-Tae,Noh, Yong-Young,Kim, Dong Ha Elsevier 2019 Nano energy Vol.57 No.-

<P><B>Abstract</B></P> <P>In this work, we developed the perovskite photodiodes based on the dimensionality-reduced quasi two-dimensional (Q-2D) photoactive layer structure by incorporating phenylethylammonium iodide (PEAI) into methylammonium lead iodide (MAPbI<SUB>3</SUB>), which effectively enhanced both the crystalline phase and the ambient stability of the perovskite. The Q-2D perovskite photodiode exhibited a dark current of 1.76 × 10<SUP>−7</SUP> A/cm<SUP>2</SUP>, resulting in the detectivity (D*) of 2.20 × 10<SUP>12</SUP> J and responsivity of 0.53 A/W, which is among the highest performance levels without the voltage bias (0 V) due to the systematically optimized perovskite phase resulting in the reduced leakage current. In addition, the current density of Q-2D perovskite photodiode maintained 76% of the initial level current density even after 80 days in the ambient condition, compared to 15% of 3D perovskite photodiode control sample. Such superior performance and stability were mainly attributed to the enhanced degree of crystallization of the Q-2D perovskites, which was confirmed by X-ray diffraction and grazing incidence wide-angle X-ray scattering (GIWAXS) measurement. Also, the improved stability of Q-2D perovskite films was confirmed by both lifetime test and atomic force microscopy studies where the negligible number of pinholes was observed in the quasi-2D perovskite films while considerable deformations were found in the 3D perovskites photodiode. Our study suggests a simple and robust protocol for the development of stable and high-performance perovskite photodetectors via dimensional and constitutional optimization of conventional perovskites for the practical usage of perovskite in the photodiode applications.</P> <P><B>Highlights</B></P> <P> <UL> <LI> The Q-2D perovskite photodiode exhibited the D* of 2.20 × 10<SUP>12</SUP> J and R of 0.53 A/W without the voltage bias (0 V). </LI> <LI> The current density of Q-2D perovskite photodiode maintained 76 % of the initial level while 15 % for the 3D one. </LI> <LI> Grazing incidence wide-angle X-ray scattering (GIWAXS) analysis revealed the origin of the stability improvement. </LI> <LI> Quasi-2D perovskite materials can be promising candidates for stable, tunable and flexible optoelectronic applications. </LI> </UL> </P> <P><B>Graphical abstract</B></P> <P>Dimensionality-controlled perovskite photodiodes with improved stability were systematically fabricated while retaining the comparable electrical performance of conventional three-dimensional perovskites. The quasi-2D perovskite photodetector exhibited an improved detectivity of 2.20 × 10<SUP>12</SUP> J performance and maintained 76% of initial level while the performance of three-dimensional perovskite photodetector remained only 15% after 80 days. Our study suggests a facile solution for the poor stability of the three-dimensional perovskite, with a potential for the development of highly-stable perovskite optoelectronics.</P> <P>[DISPLAY OMISSION]</P>

Polyethylenimine ethoxylated interlayer-mediated ZnO interfacial engineering for high-performance and low-temperature processed flexible perovskite solar cells: A simple and viable route for one-step processed CH₃NH₃PbI₃

Lim, Ju Won,Wang, Huan,Choi, Chi Hun,Quan, Li Na,Chung, Kyungwha,Park, Won-Tae,Noh, Yong-Young,Kim, Dong Ha Elsevier 2019 Journal of Power Sources Vol.438 No.-

<P><B>Abstract</B></P> <P>Developing perovskite solar cells (PSCs) with high-efficiency and a low-temperature process has great potential for the realization of the scalable, economic, and roll-to-roll based renewable energy conversion devices. ZnO has been recognized as the promising electron transport layer (ETL) that may overcome the limitations of the conventional TiO<SUB>2</SUB>. However, methylammonium lead iodide (MAPbI<SUB>3</SUB>) perovskite is prone to decomposition at the ZnO surface, which hinders the development of simple one-step deposition of perovskite, resulting in the limited photovoltaic performance. Herein, we report interlayer mediated efficient ETLs for viable flexible PSCs. The utilization of polyethyleneimine ethoxylated layer on ZnO prevents the direct contact between the perovskite and ETLs, avoiding the photoactive layer decomposition. Thus, interlayer-mediated PSCs show higher efficiency with enhanced stability by decreasing the electron transport barrier. As a result, the PSC employing tailor-designed ETL interfaces exhibited average power conversion efficiency (PCE) of 15.8%, which was superior by 25.4% to that of a control device (12.6%). With our strategy, we further demonstrated PSCs on flexible substrates which exhibit an average PCE of 11.9% under low-temperature fabrication. The new interface engineering strategy may pave the way to the realization of high performance, easy-to-process, and large-area perovskite optoelectronics.</P> <P><B>Highlights</B></P> <P> <UL> <LI> Universal interface engineering technique for highly stable flexible PSCs. </LI> <LI> The in-depth investigation into the enhanced stability and high-efficiency PSCs. </LI> <LI> Interlayer mediated PSC exhibits 15.8% PCE, superior by 25.4% to control device. </LI> <LI> Low-temperature processed PSCs for the next-generation renewable energy sources. </LI> </UL> </P> <P><B>Graphical abstract</B></P> <P>[DISPLAY OMISSION]</P>

Design and Construction of Polyaniline/Reduced Graphene Oxide Three-Dimensional Dendritic Architecture on Interdigital Electrode for Sensitive Detection Nitrite

Li Li,Huan Liu,Boya Li,Yanan Guo,Liming Qing,Baohui Wang 한국고분자학회 2020 Macromolecular Research Vol.28 No.5

The polyaniline/reduced graphene oxide (PANI/RGO) modified interdigital electrode (IDE) has been successfully fabricated by in situ electrochemical reduction and electrochemical polymerization through cyclic voltammetry. The morphology and topography of PANI/RGO characterized by SEM and AFM display intercrosslinked dendritic structure in three dimensions, and it is favorable for the detection of nitrite due to its large surface area, which can provide the large electrocatalytic active surface and various diffusion paths for nitrite. Herein, the obtained PANI/ RGO/IDE was employed for the electrochemical monitoring platform of nitrite for the first time and the electrochemical performance of the as-developed sensor was investigated via cyclic voltammetry and chronoamperometry. At the optimum conditions, the PANI/RGO/IDE has a linear response in the range from 0.4 to 183.7 mM with a sensitivity of 457.4 μA mM-1 cm-2 and a detection limit of 0.1 μM. Moreover, the obtained PANI/RGO/IDE with excellent long-term stability and reproducibility also can be employed for practical application for the determination of nitrite in tap water, the results show that the recovery rate is desirable. It is expected that IDE can be employed as the substrate electrode decorated with various materials to construct highperformance electrochemical sensors.

Analysis and optimization of a typical quasi-zero stiffness vibration isolator

Huan Li,Yang Yu,Jianchun Li,Yancheng Li 국제구조공학회 2021 Smart Structures and Systems, An International Jou Vol.27 No.3

To isolate vibration at a low-frequency range and at the same time to provide sufficient loading support to the isolated structure impose a challenge in vibration isolation. Quasi-zero stiffness (QZS) vibration isolator, as a potential solution to the challenge, has been widely investigated due to its unique property of high-static & low-dynamic stiffness. This paper provides an in-depth analysis and potential optimization of a typical QZS vibration isolator to illustrate the complexity and importance of design optimization. By carefully examining the governing fundamentals of the QZS vibration isolator, a simplified approximation of force and stiffness relationship is derived to enable the characteristic analysis of the QZS vibration isolator. The explicit formulae of the amplitude-frequency response (AFR) and transmissibility of the QZS vibration isolator are obtained by employing the Harmonic Balance Method. The transmissibility curves under force excitation with different values of nonlinear coefficient, damping ratio, and amplitude of excitation are further investigated. As the result, an optimization of the structural parameter has been demonstrated using a comprehensive objective function with considering multiple dynamic characteristic parameters simultaneously. Finally, the genetic algorithm (GA) is adopted to minimise the objective function to obtain the optimal stiffness ratios under different conditions. General recommendations are provided and discussed in the end.

Bevacizumab Regulates Cancer Cell Migration by Activation of STAT3

Wu, Huan-Huan,Zhang, Shuai,Bian, Huan,Li, Xiao-Xu,Wang, Lin,Pu, Yin-Fei,Wang, Yi-Xiang,Guo, Chuan-Bin Asian Pacific Journal of Cancer Prevention 2015 Asian Pacific journal of cancer prevention Vol.16 No.15

There are numerous clinical cases indicating that long-term use of bevacizumab may increase the invasiveness of tumors. However, to date, little is known about underlying molecular mechanisms. Therefore, the purpose of our study was to investigate effects of bevacizumab in four cancer cells lines (WSU-HN6, CAL27, Tca83, and HeLa). It was found to promote migration and invasion in the WSU-HN6 and Tca83 cases, while exerting inhibitory effects in CAL27 and HeLa cells. The signal transducer and activator of transcription (STAT) 3 inhibitors niclosamide and S3I-201 inhibited the STAT3 signal pathway, which is activated by bevacizumab. These inhibitors also substantially blocked bevacizumab-induced migration of WSU-HN6 and Tca83 cells. Bevacizumab upregulated interleukin (IL)-6 and phosphorylated (p)-STAT3 expression time-dependently. Therefore, we propose that bevacizumab has differential effects on the migration of different cancer cell lines and promotes migration via the IL-6/STAT3 signaling pathway.

TPU-keratin based Triboelectric tactile sensor for Robotic Skin

HUAN LI,김영찬,Tridib K,오정석,안영준,김진국 한국고분자학회 2017 한국고분자학회 학술대회 연구논문 초록집 Vol.42 No.2

Random dynamic analysis for simplified vehicle model based on explicit time-domain method

Huan Huang,Yuyu Li,Wenxiong Li,Guihe Tang Techno-Press 2023 Coupled systems mechanics Vol.12 No.1

On the basis of the explicit time-domain method, an investigation is performed on the influence of the rotational stiffness and rotational damping of the vehicle body and front-rear bogies on the dynamic responses of the vehicle-bridge coupled systems. The equation of motion for the vehicle subsystem is derived employing rigid dynamical theories without considering the rotational stiffness and rotational damping of the vehicle body, as well as the front-rear bogies. The explicit expressions for the dynamic responses of the vehicle and bridge subsystems to contact forces are generated utilizing the explicit time-domain method. Due to the compact wheel-rail model, which reflects the compatibility requirement of the two subsystems, the explicit expression of the evolutionary statistical moment for the contact forces may be performed with relative ease. Then, the evolutionary statistical moments for the respective responses of the two subsystems can be determined. The numerical results indicate that the simplification of vehicle model has little effect on the responses of the bridge subsystem and the vehicle body, except for the responses of the rotational degrees of freedom for the vehicle subsystem, regardless of whether deterministic or random analyses are performed.

Green Tea Consumption May Be Associated with Cardiovascular Disease Risk and Nonalcoholic Fatty Liver Disease in Type 2 Diabetics: A Cross-Sectional Study in Southeast China

Huan-Huan Yang,Hui Zhou,Wan-Zhan Zhu,Cai-Long Chen,Guo-Chong Chen,Lu-Gang Yu,Li-qiang Qin 한국식품영양과학회 2020 Journal of medicinal food Vol.23 No.10

Dietary factors play a crucial role in the management of type 2 diabetes mellitus (T2DM) by reducing cardiovascular disease (CVD) risk. Therefore, we aimed to examine the associations between habitual green tea consumption and risk factors of CVD among T2DM patients. A total of 1013 patients with T2DM were included in a community-based cross-sectional study. Data on dietary habits, including tea consumption, were collected using a food frequency questionnaire. A multivariable logistic regression model was used to analyze the associations. In men, as compared with nongreen tea drinkers, odds ratios (ORs) (95% confidence interval [CI]) of nonalcoholic fatty liver disease (NAFLD) were 2.06 (95% CI, 1.20–3.55) for those with green tea consumption of once per day and 2.45 (95% CI, 1.31–4.58) for more than or equal to twice per day (P-trend = .004); ORs (95% CI) of general obesity were 2.19 (95% CI, 1.02–4.68) and 2.70 (95% CI, 1.18–6.21), respectively (P-trend = .021); whereas no such association was found in women. Sensitivity analysis according to self-awareness of their T2DM status revealed that the positive association between green tea consumption and general obesity was not reliable. Higher intake of green tea was still positively associated with NAFLD, but it only persisted in participants aged ≥52 years or the lower dietary quality subgroup in further analyses. Our findings suggest that tea consumption was associated with an increased risk of NAFLD among male T2DM patients aged 52 years or older, and those with lower dietary quality, which needs to be confirmed in future prospective studies.

Significance of Thrombocytosis in Clinicopathologic Characteristics and Prognosis of Gastric Cancer

Li, Fang-Xuan,Wei, Li-Juan,Zhang, Huan,Li, Shi-Xia,Liu, Jun-Tian Asian Pacific Journal of Cancer Prevention 2014 Asian Pacific journal of cancer prevention Vol.15 No.16

Purpose: We aimed to study the relationship between thrombocytosis and clinical features of gastric cancerfocussing on platelet counts and gastric cancer progression through different TNM stages. Methods: According to the normal range of platelet count in our institution, 1,596 patients were divided to two groups: a thrombocytosis group (120 patients, > $400{\times}1000/{\mu}L$) and a control group (1,476 patients, ${\leq}400{\times}1000/{\mu}L$). Results: The incidence of thrombocytosis was 7.5%. Higher platelet counts were observed in patients with older age, larger tumor size, deeper invasion, lymph node metastasis, distant metastasis and advanced TNM stage. In multivariate logistic regression, tumor size, depth of tumor invasion, lymph node metastasis and TNM stage were independent risk factors for thrombocytosis of gastric cancer patients. On prognostic analysis, age, tumor size, tumor location, histologic type, depth of tumor invasion, lymph node metastasis, distant metastasis and TNM stage and platelet count were important factors. Tumor size, invasion depth, lymph node metastasis, TNM stage and the platelet count were independent prognostic factors. Conclusion: Thrombocytosis is associated with clinical features of gastric cancer patients and correlates with a poor prognosis.

Environmental Friendly Intumescent Flame Retardant Gives Epoxy Resin Excellent Fire Resistance and Mechanical Properties

Huan Wang,Li Li,Yan Kang,Xue Yin,Xuedi Lei,Jing Yang,Hui Xi,Xueqing Xu,Zhiwang Yang,Ziqiang Lei 한국고분자학회 2022 Macromolecular Research Vol.30 No.8

To reduce the fire hazard of epoxy resin (EP), PA-CS-M (where PA = phytic acid, CS =c hitosan, M=Cu2+, Co2+, Al3+, Zn2+, Mn2+) environmental friendly flame retardant is prepared by a simple and green method. By comparing the data after cone calorimetry test (CCT) of various composites, it is found that when 5 wt% PA-CS-Mn is added to EP, it has good flame retardant and smoke suppression performance. The peak heat release rate (pk-HRR) decreased by 38% and the smoke production rate (SPR) decreased by 33%. In addition, some toxic smoke such as CO has been significantly inhibited. The structures and morphologies of the materials were investigated by Fourier transform infrared (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM), and X-ray photoelectron spectroscopy (XPS). When combined with expandable graphite (EG), it is found that when the ratio of PA-CS-Mn to EG is 1:5, the pk-HRR value and SPR value decreased by 69.8% and 66.6%, respectively. More importantly, the mechanical properties of the EP composites have also been greatly improved. The flexural modulus reaches 5.04 GPa, which is 52.3% higher than pure EP, and the flexural strength increases to 79.4 MPa, which also shows an increase of 41.4% as to the matrix.