http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
3D 프린팅 기반 경량 및 고강도/강성 특성을 지닌 격자 구조 연구
박찬욱(C. W. Park),김민겸(M. K. Kim),김정현(J. H. Kim),김동원(D. W. Kim),노종환(J. H. No),유상훈(S. H. Yoo),서종환(J. Suhr) Korean Society for Precision Engineering 2021 한국정밀공학회 학술발표대회 논문집 Vol.2021 No.11월
최근 전기차와 항공기에 대한 수요가 증가하면서 경량(Lightweight), 고강도(High Strength) 및 고강성(High Stiffness) 특성을 갖는 구조의 중요성이 대두되고 있다. 주행거리를 더 확보하기 위해 위상 최적화(Topography Optimization)로 전체 구조의 무게를 낮추거나 3D 프린팅으로 차체의 뼈대나 브레이크 패드, 베어링, 모터 등을 경량화하는데에 관심이 집중되고 있다. 따라서 본 연구에서는 3D 프린팅을 위한 구조설계(Design for AM, DfAM) 기법을 고안하고, 3D 프린팅을 활용하여 경량 및 고강도/강성 특성을 지닌 격자구조를 개발하고자 한다. 위 메타 물질은 Polyjet 기법으로 제작하였으며, Polyjet 제조기법 특성을 고려하여 Open-cell 구조를 모델링하였다. 설계한 격자 구조의 압축 특성을 설계하기 위해 압축시험과 구조해석(ABAQUS)을 병행하여 설계하였고, 해석 및 압축시험을 기반으로 격자 구조의 기계적 거동(굽힘 및 좌굴 특성 등)을 분석하였다. 격자형 구조는 압축 시 기타 구조(메타 구조 및 자연 모방구조 등)에 비해 쉽게 굽힘 및 좌굴이 발생하였고 이는 격자 구조의 강도/강성 저하를 야기시켰다. 따라서 국부적인 변형을 방지할 수 있는 보강 구조(Reinforcement)를 지닌 격자 구조가 고강도/강성 특성을 보이는 것을 확인하였다. 본 연구에서 개발한 격자 구조는 미래자동차와 항공 우주분야에서 요구하는 경량 및 고강도/강성 특성을 지니어 향후 금속 3D 프린팅 기법에 접목시킨다면, 성장하는 미래자동차 시장에 대응이 가능할 것으로 기대된다. 또한, 불필요한 자원과 탄소 배출을 줄여 미래 환경에 대한 대비책이 될 것으로 사료된다.
Kim, S.W.,Roh, K.S.,Seo, S.H.,Kim, K.Y.,Kang, G.C.,Lee, S.,Choi, C.M.,Park, S.R.,Park, J.H.,Chun, K.C.,Song, K.J.,Kim, D.H.,Kim, D.M. Pergamon Press 2008 Microelectronics and reliability Vol.48 No.3
Distribution of interface states at the emitter-base heterojunctions in heterostructure bipolar transistors (HBTs) is characterized by using current-voltage characteristics using sub-bandgap photonic excitation. Sub-bandgap photonic source with a photon energy E<SUB>ph</SUB> which is less than the energy bandgap E<SUB>g</SUB> (E<SUB>g,GaAs</SUB>=1.42, E<SUB>g,AlGaAs</SUB>=1.76eV) of emitter, base, and collector of HBTs, is employed for exclusive excitation of carriers only from the interface states in the photo-responsive energy range at emitter-base heterointerface. The proposed method is applied to an Al<SUB>0.3</SUB>Ga<SUB>0.7</SUB>As/GaAs HBT (A<SUB>E</SUB>=W<SUB>E</SUB>xL<SUB>E</SUB>=250x100μm<SUP>2</SUP>) with E<SUB>ph</SUB>=0.943eV and P<SUB>opt</SUB>=3mW. Extracted interface trap density D<SUB>it</SUB> was observed to be D<SUB>it,max</SUB>∼4.2x10<SUP>12</SUP>eV<SUP>-1</SUP>cm<SUP>-2</SUP> at emitter-base heterointerface.
김완두(W. D. Kim),김완수(W. S. Kim),우창수(C. S. Woo),정승일(S. I. Jung),김석원(S. W. Kim),김영구(Y. G. Kim) 한국철도학회 2001 한국철도학회 학술발표대회논문집 Vol.- No.-
A chevron rubber spring is used in primary suspension system for rail vehicle. The chevron spring has function which support the load carried and reduce vibration and noise in operation of rail vehicle. The computer simulation using the non-linear finite element analysis program MARC executed to predict and evaluate the load capacity and stiffness for the chevron spring. The appropriate shape and material properties are proposed to adjust the required characteristics of chevron spring in the three modes of flexibility. Also, several samples of chevron spring are manufactured and experimented. It is shown that the predicted values agree well the results obtained from experiments.
d-pinitol regulates Th1/Th2 balance via suppressing Th2 immune response in ovalbumin-induced asthma
Lee, J.S.,Lee, C.M.,Jeong, Y.I.,Jung, I.D.,Kim, B.H.,Seong, E.Y.,Kim, J.I.,Choi, I.W.,Chung, H.Y.,Park, Y.M. North-Holland Pub ; Elsevier Science Ltd 2007 FEBS letters Vol.581 No.1
d-pinitol has been demonstrated to exert insulin-like and anti-inflammatory activities. However, its anti-allergic effect in the Th1/Th2 immune response is poorly understood. Recently, it was shown that T-bet and GATA-3 are master Th1 and Th2 regulatory transcription factors. In this study, we have attempted to determine whether d-pinitol regulates Th1/Th2 cytokine production, T-bet and GATA-3 gene expression in OVA-induced asthma model mice. We also examined to ascertain whether d-pinitol could influence eosinophil peroxidase (EPO) activity. After being sensitized and challenged with ovalbumin (OVA) showed typical asthmatic reactions. These reactions included an increase in the number of eosinophils in bronchoalveolar lavage (BAL) fluid, an increase in inflammatory cell infiltration into the lung tissue around blood vessels and airways, airway luminal narrowing, and the development of airway hyper-responsiveness (AHR). The administration of d-pinitol before the last airway OVA challenge resulted in a significant inhibition of all asthmatic reactions. Accordingly, this study may provide evidence that d-pinitol plays a critical role in the amelioration of the pathogenetic process of asthma in mice. These findings provide new insight into the immunopharmacological role of d-pinitol in terms of its effects in a murine model of asthma, and also broaden current perspectives in our understanding of the immunopharmacological functions of d-pinitol.
황기현(G. H. Hwang),장원태(W. T Jang),심현준(H. J. Sim),김상일(S. I. Kim),이대석(D. S. Lee) 한국멀티미디어학회 2006 한국멀티미디어학회 학술발표논문집 Vol.2006 No.1
본 논문에서는 Tag 신호를 IEEE 802.11 통신 프로토콜을 통해서 데이터 및 영상처리가 가능한 PXA255 ARM 칩을 내장한 임베디드 RFID Reader/Writer 시스템과 전송된 Tag 신호를 이용하여 D/B를 검색한 후 이를 IEEE 802.11 통신 프로토콜 통해서 임베디드 시스템에 전송하는 임베다드 RFID R/W 미들웨어를 개발하였다. 개발한 임베디드 형태의 RFID R/W 시스템은 PXA255 ARM칩을 중심으로 13.56Mhz의 RFID Reader/Writer 서버와 데이터 통신을 위한 무선랜 및 TIT-LCD로 구성되어 있다. 임베디드 RFID R/W 시스템은 Tag 신호를 시리얼단자로 통해 입력받으면 이를 무선랜을 이용하여 서버로 데이터를 전송하고 다시 서버로부터 처리된 결과 이미지 데이터를 받아서 TFT-LCD화면에 표시한다. 임베디드 RFID R/W 미들웨어는 RFID R/W 취득한 Tag 신호를 임베디드 시스템에 전송하고, 임베디드 시스템은 클라이언트 소켓 프로그램을 작동시켜 IEEE 802.11 통신 프로토콜을 통해 윈도우 서버에 접속한 후 Tag 신호를 전송한다.