http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
수치해석을 통한 진공유리 제작 및 성능실험에 관한 연구
황일선(Il Sun Hwang),이영림(Young Lim Lee) 대한설비공학회 2013 설비공학 논문집 Vol.25 No.6
For air-tight modern buildings, secondary damage is likely to occur due to condensation in the relatively high heat-transmission windows since water vapor is not easy to discharge. Therefore, in this study, condensation performance of vacuum glazing was numerically analysed, compared with that of ordinary glass and confirmed experimentally by three sheets of vacuum glazing manufactured. The results show that the heat transmission coefficient of the vacuum glazing whose internal pressure is 10<SUP>-3</SUP> torr was as low as about 5.7 W/m<SUP>2</SUP>?K. Thus, the condensation performance as well as the adiabatic performance was greatly improved compared to that of the ordinary glass.
황일선(Il Sun Hwang),이영림(Young Lim Lee) 한국생산제조학회 2012 한국생산제조학회지 Vol.21 No.4
Recently, the low-emissivity glass has been used to reduce the energy loss through building windows. However, it simply reduces the inflow of solar rays and has a relatively high heat transmission coefficient. To solve the problems, a high-efficiency vacuum glazing has been under development but it has not been actively used due to its high price and insufficient performance. In this paper, the effects of internal pressure, pillar (spacer) height, pillar diameter, pillar interval, emissivity etc. on the performance of vacuum glazing have been analyzed with three-dimensional computational fluid dynamics and structural analysis. As a result, the performance of vacuum glazing was predicted more accurately and major factors that determine the performance of vacuum glazing were optimized.
황일선(Il-Sun Hwang),이영림(Young Lim Lee) 한국산학기술학회 2014 한국산학기술학회 학술대회 Vol.- No.-
압축기는 냉동 싸이클 및 히트펌프 싸이클을 이용한 냉난방과 냉장고와 같은 항온챔버에 주로 사용되고 있다. 냉동 싸이클 및 히트펌프 싸이클에 많이 사용되고 있는 왕복동 압축기는 높은 신뢰성과 높은 효율을 가지고 있다. 하지만 효율을 저하시키는 마찰, 누설등을 줄이기 위한 많은 연구가 이루어지고 있다. 따라서 본 연구에서는 압축기 효율을 저하시키는 요인 중 하나인 누설을 3차원 수치해석을 통하여 알아보았다.
외기온도에 따른 캐스케이드 히트펌프 건조기 성능 싸이클 해석
황일선(Il-Sun Hwang),이영림(Young Lim Lee) 한국산학기술학회 2014 한국산학기술학회 학술대회 Vol.- No.-
높은 효율을 가진 냉동 싸이클과 마찬가지로 히트펌프 싸이클은 난방뿐만 아니라 식품 및 의류 등의 건조를 목적으로 사용량이 많아지고 있다. 이에 따라 히트펌프 건조기의 작동성능을 높이기 위한 많은 연구가 이루어지고 있으며 대표적으로 태양열, 지열, 폐열 등의 외부의 열원을 이용한 연구들이 있다. 본 논문에서는 히트펌프 건조기에 캐스케이드 싸이클을 이용하여 외부온도 변화에 따른 캐스케이드 히트펌프 건조기의 성능변화를 수치해석을 통하여 알아보았다.
황일선(Il Sun Hwang),이영림(Young Lim Lee) 한국기계가공학회 2021 한국기계가공학회지 Vol.20 No.6
Recently, several efforts have been made to improve the thermal efficiency of a refrigerant compressor. In this study, we attempted to improve energy efficiency ratio (EER) performance by reducing the superheat of the linear compressor. To this end, heat generated inside the compressor must be effectively dissipated. Therefore, heat dissipation was improved by processing ribs in the gap-flow region generated owing to the vibration of the compressor body. The results showed that the convective heat transfer coefficient becomes significantly high when ribs are used, increasing the heat dissipation rate. This helps improve EER by reducing the superheat of the compressor.
황일선(Il Sun Hwang),이영림(Young Lim Lee) 한국산학기술학회 2015 한국산학기술학회 학술대회 Vol.2015 No.1
냉동 사이클은 높은 효율로 인하여 실생활 및 산업전반에 걸쳐 사용되고 있다. 압축기는 냉동 사이클을 이용한 제품에서 에너지를 가장 많이 소모하여 압축기의 효율을 향상시키는 연구가 필요하다. 본 논문에서 압축기의 효율을 향상시키기 위해 딤플을 적용한 압축기를 이상유동을 고려한 3차원 수치해석을 통해 누설 및 마찰을 알아본 결과 다음과 같은 결론을 얻었다. 누설은 딤플을 적용하게 되면 피스톤과 실린더 틈새에 유입된 오일로 인해 누설은 급격히 감소하고 마찰은 커짐을 알 수 있었다.
자동차 브레이크 미세입자 포집을 위한 소형 사이클론에 관한 연구
황일선(Il Sun Hwang),이영림(Young Lim Lee) 한국생산제조학회 2021 한국생산제조학회지 Vol.30 No.2
There has been an increasing interest in the collection of fine dust generated by vehicle brakes ever since the significant decrease in emissions from the exhaust system. Herein, we investigated the effective collection of brake fine dust by applying a mini-cyclone. Numerical analyses of steady and unsteady flows for a rotating disk were performed. When the disk rotation speed was 1000 rpm, the brake cooling air exited the cooling passage at approximately 20 m/s and air flow entered the cyclone inlet at approximately 7 m/s. At this inlet velocity, the vortex flow in the cyclone was well developed, thereby indicating the potential of efficient particle collection. Numerical analysis of transient particle flows for a mini-cyclone was performed to determine the particle collection efficiency. Results indicated that the particle collection efficiency exceeded 90% for particle diameters exceeding 3 μm. Therefore, the mini-cyclone can be effectively used for collecting brake fine dust.