http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
1 keV $Ar^+$이온빔으로 개질된 polytetrafluoroethylene (PTFE) 위의 구리 박막 증착
조준식,윤기현,고석근,Cho, Jun-Sik,Yoon, Ki-hyun,Koh, Seok-Keun 한국재료학회 2000 한국재료학회지 Vol.10 No.1
1 keV $Ar^+$ 이온빔을 이용하여 polytetrafluoroethylene (PTFE)의 표면을 개질하고 그 위에 $5000\;{\AA}$의 구리 박막을 이온빔 스퍼터링법을 이용하여 증착하였다. 이온빔 조사에 의하여 PTFE의 표면에는 cone이 형성되며 cone의 높이는 이온 조사량이 증가함에 따라 점차로 증가함을 알 수 있었다. x-ray photoelectron spectroscopy (XPS) 분석을 통하여 조사된 PTFE의 표면에서는 이온 조사량이 증가함에 따라 Fls peak의 강도가 감소하며 이는 F 원자의 선택적인 스퍼터링에 기인한 것으로 생각된다. 또한 이온 조사에 의해 생성된 불안정한 사슬들은 crosslinking에 의하여 새로운 C-F 계열의 결합들을 생성하였다. 이온빔 스퍼터링법에 의하여 증착된 구리 박막은 PTFE 표면의 cone을 따라 균일하게 증착되며 PTFE의 표면 거칠기가 증가함에 따라 (111) 방향으로 우선 성장함을 알 수 있었다. 증착된 구리 박막의 비저항은 개질전 PTFE의 $2.7{\mu}{\Omega}cm$에서 $1{\tiems}10^{16}/\textrm{cm}^2$의 이온 조사량으로 개질된 PTFE의 $4.3{\mu}{\Omega}cm$까지 이온 조사량에 따라 점차로 증가하였다. $1{\tiems}10^{17}/\textrm{cm}^2$의 이온 조사량으로 개질된 PTFE 위에 증착된 구리 박막의 갑작스런 비저항 증가는 구리 박막의 단락에 의한 것으로 보인다. A surface of polytetrafluoroethylene(PTFE) was modified with changing ion doses by 1 keV $Ar^+$ ion irradiation and Cu films having thickness $5000\;{\AA}$ were deposited on the modified PTFE. The SEM study showed that the surface texture of modified PTFE was in the form of cones whose height increased depending on ion doses. Through XPS spectra, it was found that the intensity of F ls peaks decreased with ion doses by preferential sputtering of F atoms and the C-C and / or C-F chains were formed by the crosslinking in the newly unstable chains. Cu films were deposited uniformly along the filaments formed on the modified PTFE. In x-ray diffraction (XRD) spectra of deposited Cu films on modified PTFE, a preferred orientation along (111) and (200) planes was found and the peak intensity of (111) plane increased as surface roughness of modified PTFE increased. The resistivity of Cu films was changed from $2.7{\mu}{\Omega}cm$ of unmodified PTFE to $4.3{\mu}{\Omega}cm$ of modified PTFE at ion dose of $1{\times}10^{16}/\textrm{cm}^2$ and the abrupt increase of resistivity in the modified PTFE at ion dose of $1{\times}10^{17}/\textrm{cm}^2$ was due to being cut off the film which resulted from the increased surface roughness.
계절별 AERI 기준 스펙트럼 적용을 통한 구름에 영향을 받은 스펙트럼 자료 제거방법 개선
조준식 ( Joon Sik Cho ),구태영 ( Tae Young Goo ),신진호 ( Jinho Shin ) 대한원격탐사학회 2015 大韓遠隔探査學會誌 Vol.31 No.5
국립기상과학원은 2010년 6월부터, 하향적외스펙트럼을 관측하는 고분해적외분광간섭계(FT-IR) 인 Atmospheric Emitted Radiance Interferometer(AERI)를 안면도 기후변화감시센터에 설치하여 운영하고 있다. 고분해 적외 센서를 이용한 AERI는 위성 기반의 원격탐사 자료를 검증하는데 유효하다. 본 연구에서는 계절별 AERI 기준 스펙트럼을 선정 및 적용(Seasonal-Cloud data Filtering Method, S-CFM)하여 구름에 영향을 받은 관측 스펙트럼 자료 제거방법을 개선하였다. S-CFM을 적용하여 산출된 최하층 메탄농도는 한 개의 기준 스펙트럼을 사용(Cloud data Filtering Method, CFM)하여 산출된 최하층 메탄농도및 지상관측 메탄농도와 비교하였으며, AERI 연직 메탄 총량을 산출하여 GOSAT 메탄 연직 총량을 통해 검증 및 분석하였다. S-CFM 방법을 적용하여 산출된 최하층 메탄농도는 CFM의 최하층 메탄농도보다 더 정확도가 높은 것으로 나타났으며, 지상관측 메탄농도의 연간 변화 패턴과 비슷한 결과를 보였다. 또한 GOSAT과 AERI의 연직 메탄 총량 비교에서도 비슷한 농도 분포를 보였으며, 매년 증가하는 패턴을 보였다. 뿐만 아니라 S-CFM을 적용함으로써 비교 가능한 자료의 개수가 증가하였다. 다만 여름철 AERI 스펙트럼을 통해 산출된 최하층 메탄농도 및 연직 총량 농도가 상당히 과대추정 되는 모습을 보이고 있기 때문에 기술적 보완이 필요한 것으로 나타났다. The Atmospheric Emitted Radiance Interferometer (AERI) which is the Fourier Transform InfraRed (FTIR) spectrometer has been operated by the National Institute of Meteorological Research (NIMR) in Anmyeon island, South Korea since June 2010. The ground-based AERI with similar hyperspectral infrared sensor to satellite could be an alternative way to validate satellite-based remote sensing. In this regard, the NIMR has focused on the improvement of Cloud data Filtering Method (CFM) which employed only one reference spectrum of clear sky in winter season. This study suggests Seasonal-Cloud data Filtering Method (S-CFM) which applied seasonal AERI reference spectra. For the comparison of applied S-CFM and CFM, the methane retrievals (surface volume mixing ratio) from AERI spectra are used. The quality of AERI methane retrieval applied S-CFM was significantly more improved than that of CFM. The positive result of S-CFM is similar pattern with the seasonal variation of methane from ground-based in-situ measurement, even if the summer season’s methane is retrieved over-estimation. In addition, the comparison of vertical total column of methane from AERI and GOSAT shows good result except for the summer season.
AERI 스펙트럼 분석을 통한 구름에 영향을 받은 스펙트럼 자료 제거 방법 개선
조준식 ( Joon Sik Cho ),구태영 ( Tae Young Goo ),신진호 ( Jin Ho Shin ) 대한원격탐사학회 2015 大韓遠隔探査學會誌 Vol.31 No.2
국립기상연구소는 2010년 6월, 하향적외스펙트럼을 관측하는 고분해적외분광간섭계(FT-IR)인 Atmospheric Emitted Radiance Interferometer (AERI)를 안면도 기후변화감시센터에 설치하였다. AERI는 고분해 적외 센서를 탑재하고 있어 위성 기반의 원격탐사 자료를 검증하는데 유효하다. 본 연구에서는 AERI로부터 산출되는 메탄의 품질 향상을 위해 맑을 때의 자료를 분류하는 AERI 스펙트럼 기준의 새로운 방법을 개발하였으며, KLAPS 구름 정보를 이용한 방법과 비교하였다. 맑은 날 관측된 AERI 스펙트럼을 기준 스펙트럼으로 선정하였으며, 구름에 민감한 대기 창 영역을 사용하였다. 임계값 선정을 위해 복사량 임계값 테스트를 실시하였으며, 선정된 임계값을 이용한 AERI 스펙트럼 기준의 방법과 KLAPS 구름 정보를 이용한 방법을 각각 이용하여 최하층 메탄 농도를 산출하였다. 각각 산출된 메탄농도와 지상관측 메탄농도를 비교하였으며, KLAPS 구름 정보를 이용하여 산출된 메탄농도보다 AERI 스펙트럼 기준의 방법으로 산출된 메탄농도의 품질이 더 좋은 것을 확인하였다. 뿐만 아니라 GOSAT 연직 메탄 총량과의 비교에서도 좋은 결과를 보여주었다. The National Institute of Meteorological Research (NIMR) has operated the Fourier Transform InfraRed (FTIR) spectrometer which is the Atmospheric Emitted Radiance Interferometer (AERI) in Anmyeon island, Korea since June 2010. The ground-based AERI with similar hyper-spectral infrared sensor to satellite could be an alternative way to validate satellite-based remote sensing. In this regard, the NIMR has focused on the improvement of retrieval quality from the AERI, particularly clouddata filtering method. The AERI spectrum which is measured on a typical clear day is selected reference spectrum and we used region of atmospheric window. We performed test of threshold in order to select valid threshold. We retrieved methane using new method which is used reference spectrum, and the other method which is used KLAPS cloud cover information, each retrieved methane was compared with that of ground-based in-situ measurements. The quality of AERI methane retrievals of new method was significantly more improved than method of used KLAPS. In addition, the comparison of vertical total column of methane from AERI and GOSAT shows good result.
조준식 ( Joon-sic Cho ),한영주 ( Young-ju Han ),정성민 ( Sung-min Jung ),박선호 ( Seon-ho Park ),정태명 ( Tai-myoung Chung ) 한국정보처리학회 2006 한국정보처리학회 학술대회논문집 Vol.13 No.2
취약성을 분석하고 관리를 위한 방법으로 마이크로소프트사의 윈도우 운영체제는 사후처리방식인 테스터들의 테스팅 결과에 의한 패치를 적용하는 방법을 사용하였다. 급격히 변하는 공격 방법에 대한 빠른 조치가 이루어지지 못하기 때문에, 운영체제의 기본요건인 강건성과 보안성을 만족시키지 못한다. 이러한 요건을 만족시키기 위해 사후처리가 아닌 취약성 분석을 위한 테스트 및 디버깅 방법론이 필요하고, 본 논문에서는 선행 작업으로 윈도우 시스템에 대한 보안상 결함인 취약성을 분류하는 취약성 매트릭스 기반의 분류 방법론을 제시한다.
Development of textured ZnO:Al films for silicon thin film solar cells
조준식(Cho, Jun-Sik),김영진(Kim, Young-Jin),이정철(Lee, Jeong-Chul),박상현(Park, Sang-Hyun),송진수(Song, Jin-Soo),윤경훈(Yoon, Kyoung-Hoon) 한국신재생에너지학회 2009 한국신재생에너지학회 학술대회논문집 Vol.2009 No.11
High quality ZnO:Al films were prepared on glass substrates by in-line RF magnetron sputtering and their surface morphologies were modified by wet-etching process in dilute acid solution to improve optical properties for application to silicon thin film solar cells as front electrode. The as-deposited films show a strong preferred orientation in [001] direction under our experimental conditions. A low resistivity below 5{times}10^{-4}{Omega}{cdot}cm and high optical transmittance above 80% in a visible range are achieved in the films deposited at optimized conditions. After wet-etching, the surface morphologies of the films are changed dramatically depending on the deposition conditions, especially working pressure. The optical properties such as total/diffuse transmittance, haze and angular resolved distribution of light are varied significantly with the surface morphology feature, whereas the electrical properties are seldom changed. The cell performances of silicon thin film solar cells fabricated on the textured films are also evaluated in detail with comparison of commercial SnO₂:F films.