http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
주암조절지댐 방류수에 따른 하천 및 순천만 일대 수온변화 조사분석
이현노,정관수,천근호,허영택,Lee, Hyeon No,Jung, Kwan Sue,Cheon, Geun Ho,Hur, Young Teck 한국수자원학회 2015 한국수자원학회논문집 Vol.48 No.6
최근의 다목적댐 운영은 기존의 홍수조절, 용수공급, 수력발전과 같은 수량뿐만이 아니라 수질, 생태환경 등 다양한 이해관계를 고려하도록 요구받고 있다. 본 연구의 목적은 주암조절지댐의 저온 심층수 방류로 인해 사회적 갈등이 있는 지역을 대상으로 수온을 조사하고, 수온변화 특성을 분석하는 것이다. 본 연구에서는 주암조절지댐, 하류하천, 순천만 지역에 대해 장기간에 걸쳐 수온을 모니터링 하였으며, 3차원 수치모형(EFDC)을 활용하여 방류량과 같은 다양한 외부 인자들을 고려하여 하류하천 및 순천만에서의 수온변화를 비교 분석하였다. 모니터링 및 수치모의 결과 댐의 저온 방류수 영향은 대체적으로 4월~9월 기간에 나타나는 것을 알 수 있었으며, 또한 댐 저온수 방류 영향이 방류시기, 방류수온, 방류량, 기상, 조위 등 다양한 인자에 의해 복잡한 형태로 변화한 것을 알 수 있었다. 본 연구의 결과는 댐의 저온수 방류로 인한 하류하천 및 연안지역 악영향을 최소화하기 위한 댐 운영 개선방안 수립시 기초자료로 활용될 수 있을 것으로 판단된다. Lately multipurpose dam is required to consider various interests such as quality, ecological environment as well as flood control, water supply, hydropower generation, etc. The objective of this study is to investigation and analysis of water temperature in the areas where there are social conflicts due to cold water outflow. In this study, we monitored water temperature of Juam regulation dam, downstream river, Suncheon bay in a long term period and performed comparative analysis on a change of water temperature in downstream river and Suncheon bay by using three-dimensional numerical mode (EFDC) considering various external factors such as water outflow amount. The result of monitoring and numerical modelling indicates that effects of cold water outflow takes place from april to september. Also effects of the low temperature discharge of dam was complicatedly altered by various factors such as outflow time and amount, weather and tide level conditions etc. The result of this study can be utilized as a basic data for establishing improvement of dam operation plan to minimize negative effects of dam's cold temperature water outflow to downstream river and coastal area.
44th Design Automation Conference를 다녀와서
이현노,Lee, Hyeon-No IT-SOC협회 2007 IT SOC magazine Vol.19 No.-
올해 44회를 맞이한 DAC(Design Automation Conference)는 6월 4일부터 8일까지 5일간 캘리포니아 샌디에고에서 개최되었다. 이번 DAC에도 샌프란시스코에서 열렸던 43회 DAC와 마찬가지로 인텔, IBM, ARM, Sun Microsystems 등 첨단 SoC/IP 설계회사와 Cadence, Synopsys 등 EDA 개발회사, 그리고 TSMC, UMC 등 유수의 파운드리회사들이 참가하였다. 전시회 참여업체는 약 250여개로 예년보다 약간 증가하였고 총 참관객수는 11,000여명으로 다소 줄어들었다. 하지만 국내 참여업체 관계자들은 참관객들의 질적인 수준이 작년 DAC보다 더 높아 제품을 홍보하고 관련 업계 사람들과 정보를 교환하기에 더없이 좋은 기회였다고 평가했다. 또한 이번 DAC 컨퍼런스는 총 10개 트랙, 53개의 세션들이 진행되었으며 약 161개의 논문이 발표되어 매우 역동적인 기술교류가 이루어졌다. 여기에서는 44th DAC의 주요 이슈와 전시회에 참여하였던 국내 SoC업체들의 제품에 대해 살펴 보고자한다.
Al계 유기금속화합물 혼합촉매 시스템을 이용한 L-Lactide 벌크중합 특성 연구
노이현(Yee Hyeon Noh),고영수(Young Soo Ko) 한국고분자학회 2012 폴리머 Vol.36 No.1
본 연구에서는 Al 계 화합물 혼합촉매 시스템의 L-lactide 벌크중합을 통해 단일 Al계 화합물과 혼합된 Al계 화합물의 중합 특성의 차이를 확인하였다. Al 화합물 촉매를 조성비를 변화시킨 혼합촉매를 사용하여 벌크중합 한 polylactic acid (PLA)는 FTIR, DSC, GPC 등으로 분석하였다. 선정된 Al계 화합물로는 aluminum isopropoxide (Al(O-i-Pr)3), trimethylaluminum(TMA), trioctylaluminum(TOA), triisobutylaluminum(TIBA)이었으며 TIBA를 기 준 촉매로 선정하여 나머지 세 Al화합물을 각각 혼합하여 사용하였다. Al(O-i-Pr)3와 TIBA를 혼합한 촉매의 경우 혼합촉매 내 Al(O-i-Pr)3의 양이 증가함에 따라 전환율도 증가하였고 생성된 PLA의 분자량은 13000까지 증가하 였으며 분자량분포도도 약간의 증가를 보였다. 분자량 분포곡선은 혼합촉매 시스템의 경우 고분자량 부분에서 약간의 tail 또는 shoulder 형태가 형성되었다. TOA와 TIBA를 혼합한 촉매를 이용하여 L-lactide를 벌크중합한 결 과 전환율은 혼합촉매 내 TOA의 양이 증가함에 따라 낮아졌다. TOA와 TIBA를 혼합한 촉매를 이용하여 벌크중 합한 PLA의 분자량은 혼합촉매 내 TOA 조성이 60 mol%까지 분자량이 14000 g/mol까지 증가하다가 감소하였다. 이러한 Al계 혼합촉매 시스템을 통해 PLA의 고분자량 tail이나 shoulder을 생성할 수 있었으며 이를 통해 PLA의 기계적 물성을 향상시킬 수 있는 역할을 기대할 수 있다. The differences between single and mixed aluminium catalyst systems in the bulk polymerization of Llactide were studied. Al(O-i-Pr)3, TMA, TOA and TIBA were employed for the mixed-catalyst systems, and TIBA was chosen as a reference catalyst. For the Al(O-i-Pr)3/TIBA catalyst system, the conversion of polymerization increased as the composition of Al(O-i-Pr)3 in the mixed catalyst increased. The molecular weight of the resulting PLA reached to about 13000 g/mol, and the polydispersity index of the polymer from the Al(O-i-Pr)3/TIBA catalyst was slightly increased than that of single catalyst. The higher molecular weight tail or shoulder was revealed in the GPC curve. The conversion of the TOA/TIBA catalyst system decreased as the composition of TOA in the mixed catalyst increased. The molecular weight of PLA prepared with TOA/TIBA catalysts increased up to 14000 g/mol. The Al compounds-mixed catalysts could produce a higher molecular weight tail or shoulder in the GPC curve, which may result in enhancement of mechanical properties of PLA.
패킷 손실에 의해 잘못된 토큰 버킷 파라메타를 정정하는 비디오 정보 파일을 가진 비디오 스트리밍 수신기
이현노(Hyun-No Lee),김동회(Dong-Hoi Kim) 한국디지털콘텐츠학회 2016 한국디지털콘텐츠학회논문지 Vol.17 No.3
Video streaming traffics which are arrived in receiver have irregular traffic patterns by many problems over the network path. Particularly, if these received traffics enter into replay buffer without any operation, the overflow and underflow effects are made according to the buffer status. There was an existing scheme which automatically set up token bucket parameters using the video information file under the assumption of the lossless packet on network. The existing scheme has a problem which can set up the wrong token bucket parameters by the lost packets on the practical networks with video packet loss. Therefore, this paper proposes a new scheme which reset up video file information to correct the wrong token bucket parameters in case of packet loss in practical networks with packet loss. Through the simulation, it was found that the proposed scheme would have better performance than the existing scheme in terms of overflow generation and packet loss.