이미지 데이터를 모니터링하는 관리도에서 이미지와 ROI 크기 조정의 영향

이주형,윤형욱,이성민,이재헌,Lee, JuHyoung,Yoon, Hyeonguk,Lee, Sungmin,Lee, Jaeheon 한국통계학회 2017 응용통계연구 Vol.30 No.3

A machine vision system (MVS) is a computer system that utilizes one or more image-capturing devices to provide image data for analysis and interpretation. Recently there have been a number of industrial- and medical-device applications where control charts have been proposed for use with image data. The use of image-based control charting is somewhat different from traditional control charting applications, and these differences can be attributed to several factors, such as the type of data monitored and how the control charts are applied. In this paper, we investigate the adjustment effect of image size and region of interest (ROI) size, when we use control charts to monitor grayscale image data in industry. 최근 산업의 생산공정에서는 머신비전시스템을 통하여 제품의 품질특성치에 대한 정보를 이미지 데이터로 제공하는 경우가 많다. 따라서 산업과 의학 현장에서 이미지 데이터의 모니터링을 위해 관리도 절차의 필요성이 많이 대두되고 있다. 이미지 데이터를 모니터링하는 관리도 절차는 전통적으로 사용하는 관리도 절차와 유사한 점도 있지만, 데이터의 구조를 비롯하여 각 이미지에서 ROI를 설정하여 관리도 절차를 적용하는 등 서로 다른 점도 많이 있다. 이 논문에서는 생산공정에서 제공되는 이미지 데이터에 대해 관리도를 사용하는 절차를 소개하고, 이미지 또는 ROI 크기의 확대와 축소가 제품의 이상원인을 탐지하는데 어떠한 영향이 주는지를 모의실험을 통하여 알아보았고 각 관리도의 성능 또한 비교하였다.

HVPE 법을 통한 GaN 성장 시 기판 종류 및 V/III 비에 따른 잔류 stress 특성 연구

이주형,이승훈,이희애,강효상,오누리,이성철,이성국,박재화,Lee, Joo Hyung,Lee, Seung Hoon,Lee, Hee Ae,Kang, Hyo Sang,Oh, Nuri,Yi, Sung Chul,Lee, Seong Kuk,Park, Jae Hwa 한국결정성장학회 2020 한국결정성장학회지 Vol.30 No.2

본 연구에서는 HVPE 성장법으로 GaN 성장 시 GaN 내에 잔류하는 stress로 인한 crack 현상을 감소시키고자 기판 종류 및 V/III 비를 조절하여 잔류 stress 특성을 알아보고자 하였다. Sapphire, GaN template 위에 각각 V/III 비 5, 10, 15의 조건으로 GaN을 성장시켜 형성된 hexagonal pit의 분포 및 깊이를 분석하였다. 이를 통해 GaN on GaN template 성장에서 V/III 비가 높을수록 hexagonal pit의 분포 영역 및 깊이가 증가하는 것을 확인하였다. Raman 측정을 통해 hexagonal pit 영역 및 깊이가 컸던 GaN on GaN template 성장에서 V/III 비가 높을수록 stress가 감소하는 것을 확인하였다. 이를 통해 hexagonal pit의 분포 및 깊이가 증가할수록 잔류 stress가 낮아짐을 확인할 수 있었으며, 향후 후막 GaN 성장 시 stress 감소 가능성에 대해 확인하였다. The characteristics of the residual stress on the types of the substrate was investigated with adjusting the V/III ratio during GaN growth via the HVPE method. GaN single crystal layers were grown on a sapphire substrate and a GaN template under the conditions of V/III ratio 5, 10, and 15, respectively. During GaN growth, multiple hexagonal pits in GaN single crystal were differently revealed in accordance with growth condition and substrate type, and their distribution and depth were measured via optical microscopy(OM) and white light interferometry(WLI). As a result, it was confirmed that the distribution area and depth of hexagonal pit tended to increase as the V/III ratio increased. Moreover, it was found that the residual stress in GaN single crystal decreased as the distribution area and depth of the pit increased through measuring micro Raman spectrophotometer. In the case of GaN growth according to substrate type, the GaN on GaN template showed lower residual stress than the GaN grown on sapphire substrate.

항공온실가스 배출현황 및 감축규제 대응방안

이주형,김원호,김용석,최성원,Lee, Juhyoung,kim, Wonho,Kim, Yongseok,Choi, Sungwon 한국항공운항학회 2016 한국항공운항학회지 Vol.24 No.1

Global aviation is projected to grow in demand by an annual average of 4.1% between 2014 and 2034. It can be said that environmental impact from aviation will therefore be expected to increase on a similar scale. As regards civil aviation emissions, the sector contributes between 2~3% to International aviation GHG emissions. In the European Union(EU), aviation emissions account for about 3% of the EU's total green house gas emissions, of which a majority are said to come from international flights. In terms of traffic volume in 2013, Korea's international aviation industry 11th with regard to passengers and 3rd with regard to cargo, attaining the overall rank of 5th in the world. GHG emissions has been increasing steadily over the last 4 years, averaging 3.9 percent a year, due to the growth of low cost carriers and the increased demand for air transportations. As for aviation in Korea, there are a number of means intended to attain the Government's emission control objective in an efficient manner, such as AVA (Agreement of Voluntary Activity), TMS (Target Management System) and ETS (Emission Trading Scheme). In addition, the Government intends to better adapt to ICAO's Global MBM(Market-based Measures) that will come into performance on Year 2020. In the study, we focused on GHG mitigation measures that is fulfilling the AVA, TMS, ETS in the Government and suggest the effective measures to reduction the aviation GHG emissions.

Sn-Zn 공정합금의 응고속도에 따른 조직과 기계적 성질에 관한 연구

이주형,이계완 ( J . H . Lee,K . W . Lee ) 한국주조공학회 1985 한국주조공학회지 Vol.5 No.4

The structures and mechanical properties of undirectionally solidified Sn-Zn eutectic alloys have been examined over the growth range 7㎜/h to 6,000㎜/h. The structures of undirectionally solidified Sn-Zn eutectic alloys were primarily broken-lamellar at growth rates below 760㎜/h and became fibrous at higher growth rates above that. At a growth rate 3,084㎜/h the structures were fibrouse only. There is no dendrites at any growth rates, but occasionally ribbon-like morphologies were seen. The under cooling increased parabolically with growth rate increase. The hardness of specimes increased with growth rates increase but heat-treated specimen decreased after growth rates 760㎜/h and became constant value. The effect of heat-treatment was good at lower growth rate. At room temperature tensile strength increased with growth rates up to R=990㎜/h and then tensile strength became near-constant value. The effect of heat-treatment was well at lower growth rate.

고령 환자의 기존 의치를 치과기공소에서 수리한 증례

이주형,Gyu-Heon Lee 대한치과기공학회 2022 대한치과기공학회지 Vol.44 No.4

The need for repairing removable dentures has grown as the population had aged. The di-rect methods allow existing dentures to be repaired without interrupting their use. However, if patient compliance is low, direct methods may be challenging. Moreover, attaching an ar-tificial tooth to a metal base is a complicated procedure because it necessitates casting a retentive element and soldering it to a metal base. This clinical report describes how to add an artificial tooth to a metal base, reline denture bases, and reestablish occlusion on re-lined removable dentures using indirect methods. Existing removable dentures were suc-cessfully repaired and their service life was efficiently extended using the methods de-scribed.

첨단 통신기기의 발전과 대응

이주형,Lee, Ju-Hyeong 한국전자정보통신산업진흥회 1986 電子振興 Vol.6 No.7

회원작품 - 421집

이주형,Lee, Joohyoung 대한건축사협회 2019 建築士 Vol.606 No.-

정규화 포락선 검파기와 얼리-레이트 필터를 적용한 새로운 홉 타이밍 예측기

이주형,Lee, Ju-Hyung 한국통신학회 2007 韓國通信學會論文誌 Vol.32 No.4C

본 논문에서 정규화 포락선 검파 기법(NED ; Normalized Envelop Detection)과 얼리-레이트 필터(ELF ; Early-Late Filter)가 적용된 새로운 홉 타이밍 예측기를 제안하였다. 제안한 구조의 성능 검증을 위해 컴퓨터 시뮬레이션으로 제안한 시스템과 기존 시스템의 동기 오차 측정 결과를 비교하였다. 시뮬레이션 결과를 통해서 부분 대역 재밍 환경에서 제안 구조가 기존 구조보다 정확하게 동기오차를 예측하는 것을 확인할 수 있었으며, 이러한 경향은 $E_b/N_j$와 재밍점유대역비(rho)가 낮을수록 더욱 뚜렷하였다. In this paper, the hop-timing estimator, which NED and ELF are adopted to, has been proposed. The estimation performance of the proposed scheme and the conventional scheme is compared through computer simulations. The simulation results show that the new system has less hop-timing error than the conventional system in partial band noise jamming channel. The lover Eb/Nj and ratio of jamming bandwidth(rho) we, the bigger performance enhancement of the proposed system is.

회원작품 - 건축비평 _ 젊은 아이디어로 '신수동 골목'에 생기를⋯ '풍경을 바꾼' sista house

이주형,Lee, Joohyoung 대한건축사협회 2020 建築士 Vol.613 No.-

휴대용 SAM의 특성 및 발전추세

이주형,어하준,Lee, Ju-Hyeong,Eo, Ha-Jun 한국방위산업진흥회 1994 國防과 技術 Vol.- No.185