http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
이영재(Lee, Youngjae) 한국산업경제학회 2022 산업경제연구 Vol.35 No.5
표준적으로 사용되는 노동생산성 개념은 간접고용 노동자(파견, 사내하청, 용역 등)를 포함하지 않기 때문에 간접고용 비중이 높을수록 기업의 노동생산성에 더 큰 편의를 유발한다. 본고는 간접고용을 보정한 노동생산성을 계산하고 이를 이용해 간접고용이 노동생산성에 미치는 영향을 분석하였다. 기업규모가 클수록 간접고용 사용비중이 높아져 더 큰 노동생산성 편의가 발생하였다. 편의 규모는 중소기업이 3.9~4.4%, 대기업이 8.7~11.2%로 계산되었다. 간접고용과 노동생산성의 관계는 기업의 소요기술 특성별로 다르게 나타났다. 간접고용이 노동생산성에 미치는 영향은 비숙련노동 위주의 제조기업에서는 단정 지을 수 없었으나 고숙련노동 위주의 제조기업에서는 노동생산성을 낮추는 것으로 작용하였다. 반면 기술변화가 빠르고 다양한 전문지식을 갖춘 노동력에 대한 수요가 있는 고위기술 서비스기업에서는 간접고용이 노동생산성을 높였다. 이러한 결과는 기업이 자신의 기술특성을 충분히 고려하여 간접고용 활용 정도를 결정할 필요가 있음을 시사한다. The standard labor productivity do not consider labor outsourcing, such as seconded workers, in-house contractors. It causes labor productivity bias when a firm heavily depends on labor outsourcing to produce its output. This paper estimates new labor productivity considering both directly hired and outsourced worker, and analyzes the impacts of labor outsourcing on labor productivity using the new measures. According to the results of an analysis of manufacturing firms, the larger the firm, the higher the level of labor outsourcing, resulting in a more significant upward bias for labor productivity. The level of such upward bias is around 3.9%-4.4% for small and medium-sized firms and 8.7%-11.2% for large firms. The relation between labor outsourcing and labor productivity is found to vary depending upon the characteristics of the technologies adopted by firms. We cannot draw certain relation about the impacts of labor outsourcing on the labor productivity of unskilled labor-driven manufacturing firms. Labor outsourcing, however, reduces labor productivity for high-skilled labor-driven manufacturing firms. On the other hand, for high-tech service firms that undergo rapid technological change and require labor with diverse expertise, labor outsourcing increases labor productivity. These results imply that a firm should make labor outsourcing decisions after sufficiently considering its technological characteristics (unskilled/skilled and low-tech/high-tech), instead of simply following what leading companies are doing.
기포 유동층 반응기를 이용한 하수슬러지 및 우드펠렛 혼소에 관한 연소 특성 분석 및 비교
이영재(Youngjae Lee),김종민(Jongmin Kim),김동희(Donghee Kim),이용운(Yongwoon Lee) 한국청정기술학회 2017 청정기술 Vol.23 No.1
하수슬러지 고형연료 및 우드펠렛의 전소 및 혼소 실험을 위해 내경 0.1 m, 높이가 1.2 m인 기포 유동층 반응기를 적용하였으며, 장치는 유동층 반응기, 연료 공급장치, 사이클론, 냉각기, 그리고 가스분석기로 구성되었다. 층 물질의 평균입자크기는 460 ㎛이며, 최소 유동화 속도는 0.21 m s<SUP>-1</SUP>이다. 실험에 사용된 연료는 국내산 하수슬러지 고형연료 및 캐나다산 우드펠렛을 적용하였으며, 우드펠렛 기준 혼합율 20, 50, 80%로 고위발열량을 기준으로 산정하였다. 실험 고정변수는 당량비 1.65, 산화제 100 L min<SUP>-1</SUP>, 반응기 온도 800 ℃, 유동화수 4로 설정하였다. TGA 분석 결과, 하수슬러지의 고형 연료의 연소성이 우드펠렛이 비해 상대적으로 좋지 않았다. 연소시 반응기 온도는 800~900 ℃ 사이로 유지되었으며, 유동층 반응기에서 하수슬러지 고형연료의 낮은 연소성으로 인해 CO가 상대적으로 높게 측정되었다. 뿐만 아니라 NOX와 SOX는 하수슬러지 고형연료 내의 질소함량으로 인해 우드펠렛에 비해 높게 측정되었으며, 혼소율이 증가될수록 CO, NOX, 그리고 SOX의 배출이 감소하였다. 혼소에 따른 회분의 거동 및 퇴적 경향에서 모든 조건에 대해 슬래깅/파일링의 가능성이 높은 것으로 분석되었다. The bubbling fluidized bed (BFB) reactor with a diameter of 0.1 m and a height of 1.2 m was used for experimental study of co-firing and emission characteristics fueled by sewage sludge (SS) and wood pellet (WP). The facility consists of a fluidized bed reactor, feeding system, cyclone, condenser and gas analyzer, The mean particle diameter and minimum fluidization velocity are 460 ㎛ and 0.21 m s<SUP>-1</SUP> respectively. SS produced from Korea and WP from Canada were examined. The various mixing ratios of WP were 20, 50, and 80% based on HHV. The equivalence ratio of 1.65, reactor temperature of 800 ℃, air flow rate of 100 L min<SUP>-1</SUP>, and fluidization number of 4 were fixed in the BFB experiment. In TGA, the range of combustion temperature of SS was wider than that of WP. It represents that the combustibility of WP is higher than that of SS. The BFB reactor temperature was maintained between 800 and 900 ℃. CO emission of SS was high because of lower combustibility. NOX and SOX formation of SS were higher than that of WP since high nitrogen and sulfur contents of SS. CO, NOX, and SOX formation were suppressed as the mixing ratio of WP was increased. The slagging and fouling tendencies show high in all test conditions.
이영재(Youngjae Lee),조종표(Chongpyo Cho),김계현(Gyehyun Kim),정중용(James Y. Jung),송인범(Inbeom Song),정현택(Hyountaeg Jung) 한국자동차공학회 2008 한국자동차공학회 춘 추계 학술대회 논문집 Vol.- No.-
RSD (Remote Sensing Device), which is a roadside measuring device, can measure the exhaust emissions of the vehicle to pass the device without any interference. RSD is capable of measuring the CO, HC, NO, CO₂ emissions of gasoline vehicles, and additionally smoke of' diesel vehicles within I second. Therefore, it can provide thousands or on-road emissions data in a day. In the present study, RSD and conventional emission test equipments were used to analyze the relationship between these equipments. From the test results, it was concluded that RSD can replace the current exhaust gas analyzer as on-road inspection or in-use vehicles, and also can be used to identify the gross emitters and clean vehicles.
이영재(Lee Youngjae) 국어문학회 2021 국어문학 Vol.77 No.-
본 논문은 한국수어의 공간 활용 방법에 대한 간략한 연구이다. 사실 농인의 언어 사용은 수어사전에 등재돼 있는 수어의 능숙한 사용보다 그 수어를 사용하여 수어공간 내에서 어떻게 활용을 하는가에 달려 있다고 해도 과언이 아니다. 한국수어의 동사를 일반동사, 일치동사, 공간동사 등으로 분류하여 논의하였다. 특히 일치동사를 더욱 세분하여 수직적, 수평적, 역행적 일치동사 등으로 나누어 논의하였고, 그 중 수직적 일치동사가 한국수어에 있어서 특징인 점을 논의하였다. 공간동사는 의미분류사와 함께 사용을 하는데 한국수어 연구에서 의미분류사에 대한 연구가 이루어지고 있지 않으므로 논의에 어려움이 있으나 미국수어의 의미분류사에서 참고할 점을 활용하여 한국수어의 공간동사를 간략하게나마 논의하였다. 수어공간을 지형적 공간과 통사적 공간으로 나누어 논의하는 것에 대해서는 문제가 없으나 수어공간이 지형적 공간과 통사적 공간으로 따로 존재하는 논의에 대해서는 부정적 입장임을 밝혔다. 이에 앞으로 수어공간에 대한 더 많은 연구가 필요함을 강조하였다. 또 시선(eye gaze) 처리에 따른 문법의 다양한 면도 고찰하였다. This paper is a brief study of how to utilize Korean Sign Language space. In fact, it is no exaggeration to say that the use of language by the deaf depends on how to use it in the sign language space rather than on the proficient use of the sign language listed in the sign language dictionary. Verbs in Korean Sign Language were classified into general verbs, agreement verbs, and spatial verbs. In particular, the agreement verbs were further divided into vertical, horizontal, and backward agreement verbs, and among them, the characteristics of the vertical agreement verbs in Korean Sign Language were discussed. Spatial verbs are used with semantic classifiers, but it is difficult to discuss because there is no research on semantic classifiers in Korean Sign Language studies, but the spatial verbs of Korean Sign Language were briefly discussed using references from American Sign Language classifiers. There is no problem with dividing the sign language space into topographical and syntactic spaces, but it is negative opinion about the discussion that sign language space exists separately as topographical and syntactic spaces. This emphasized the need for more research on sign language spaces in the future. We also consider various aspects of grammar according to eye gaze processing.
이영재(Lee, Youngjae) 한국산업경제학회 2021 산업경제연구 Vol.34 No.3
한계기업의 증가는 기업의 가격(마진율) 인하 압력으로 작용하여 단기적으로 인플레이션을 낮추는 것으로 분석된다. 한계기업 비율이 10%p 늘어나면 기업의 마진율은 평균적으로 2.47%p 낮아지고 인플레이션은 약 0.06%p 하락하는 것으로 나타났다. 구조조정 지연으로 한계기업 비율이 높아지면 기업의 수익성이 낮아지고 이는 한계기업 비율을 더욱 높여 저인플레이션 현상을 강화할 가능성이 있다. The increase in zombie firms acts as a downward pressure for firms" markup, and it lowers inflation in the short run. A 10 percentage point increase in the share of zombie firms drops a 2.47%p of markup on average, reducing a 0.06%p of inflation. If the share of zombie firms increases due to delayed restructuring, the company"s profitability will decrease, leading to a vicious cycle of further lowering inflation.