http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
생육공간을 공유하는 소나무와 졸참나무의 수분 이용 전략 비교 분석
이기웅,이보라,조낭현,임종환,김은숙,Lee, Kiwoong,Lee, Bora,Cho, NangHyun,Lim, Jong-Hwan,Kim, Eun-Sook 한국산림과학회 2022 한국산림과학회지 Vol.111 No.3
본 연구는 한국 산림생태계의 주요 우점종인 소나무와 졸참나무의 수분 이용 전략을 비교·분석하기 위해, 2019년 3월부터 12월까지 경기도 포천시에서 시행되었다. 소나무(n=6)와 졸참나무(n=3)의 수액속밀도와 환경 변수인 대기 온도, 상대습도, 강수량, 순복사량, 토양수분을 측정하여 계절변화 및 환경 변수에 따른 수액 이동 특성을 분석하였다. 그 결과, 수종의 최대 수액속밀도는 생장 기간(5-10월)에 졸참나무가 소나무보다 2배 가까이 높았으며, 졸참나무는 9월에 소나무는 8월에 가장 높았다. 수액속밀도에 영향을 주는 주요한 환경 변수들은 포화수증기압차와 순복사량이었으며, 대기 온도는 영향을 주지 못했다. 이력현상 분석에서 소나무는 건조해짐에 따라 기공을 닫고 졸참나무는 여전히 기공을 열어두는 전략을 사용하는 것을 발견하였다. 수관전도도 역시 최대 수액속밀도와 비슷한 경향을 보이며, 졸참나무의 수관전도도가 소나무의 수관전도도보다 약 2배 정도 더 높았다. 본 연구에서는 두 수종의 수분 이용 전략을 비교 분석하였고, 더 명확한 기작의 이해를 위해 생리적 특성뿐만 아니라 형태적 특성에 관한 연구도 병행되어야 할 것이다. The study was carried out in Pocheon-si, Gyeonggi-do from March to December in 2019 to compare and analyze the water use strategies of two co-occurring tree species, Pinus densiflora and Quercus serrata, both native and dominant in Korea's forest ecosystems. Through seasonal changes, we measured environmental variables such as air temperature, relative humidity, precipitation, net radiation, and soil water content. Sap flow densities of P. densiflora (n = 6) and Q. serrata (n = 3) were measured, along with environmental variables. The maximum sa pflow density for Q. serrata almost doubled that of P. densiflora during the growing season, while the maximum sap flow densities in both Q. serrata and P. densiflora peaked in September and August, respectively. Net radiation and vapor pressure deficit, but not air temperature, were the major environmental variables significantly affecting sap flow density. Analysis of hysteresis revealed that P. densiflora exhibited isohydric behavior, while Q. serrata showed anisohydric behavior. Analysis of crown conductance revealed similar trends as sap flow density, i.e., the crown conductance of Q. serrata was twice that of P. densiflora during the growing period. The study compared and analyzed the water use strategies between two co-occurring species. To better understand the underlying mechanisms of water use, more research on both physiological and morphological traits are needed.
이기웅(Kiwoong Lee),최호섭(Hoseop Choi),김대성(Dae Seong Kim),장민석(Min Seok Jang),최만수(Mansoo Choi) 대한기계학회 2014 대한기계학회 춘추학술대회 Vol.2014 No.11
There have been intense efforts to stack 2D planar nanostructures in order to amplify its photonic functionality or acquire photonic chirality. In this study, we fabricated multi-layer structures layer-by-layer via consecutive execution of e-beam lithography (EBL) and 3D assembly of nanoparticles. Each layer of multi-layer 3D nanostructures is fabricated through 3-step procedures. (1) Patterns on silicon substrate via EBL. (2) Ion assisted aerosol lithography (IAAL) to fabricate 3D nanostructures. (3) Sintering 3D nanostructures by e-beam irradiation to endure the spin-coating of e-beam resistor (ER). Multi-layer 3D nanostructures were manufactured through the repetition of (1) to (3). Then, finally, ER was eradicated through O2 plasma ashing. In addition, after fabricating the multi-layer 3D nanostructures, we compared the surface enhanced Raman spectroscopy (SERS) signals of 3D mono-layer structures with the signals of 3D multi-layer structures. As a result, it was shown that the peak signal intensity of the SERS of the bi-layer nanostructure was twice as high as the monolayer’s.
초소형 비행체용 하이브리드 엔진 냉각을 위한 3D 프린팅 카울 형상 및 재질 연구
이기웅(Kiwoong Lee),김우비(Woo Bee Kim),권혁록(Hyuk Rok Gwon),김대원(Dae Won Kim),정윤식(Yunsik Jung),이현석(Hyeon Seok Lee),조성진(Sung Jin Jo),이선형(Seon Hyeong Lee) 한국추진공학회 2019 한국추진공학회 학술대회논문집 Vol.2019 No.5
본 논문에서는 하이브리드 추진시스템에 사용하는 공랭식 엔진에 3D 프린터로 제작된 카울을 적용하기 위하여 고려되어야 할 형상과 재질 특성에 대해 살펴보았다. 열/유동 해석을 통해 냉각 성능 확인 및 카울에 영향을 줄 수 있는 요소들에 대하여 연구하였으며, 실물 모사 형상의 지상 시험을 통하여 최종적으로 냉각 카울로 적용할 형상 및 재질을 선정하였다. In this paper, we studied shape and material feature which must be considered for appling 3D printing cowls for air cooling hybrid propulsion system engine. Using Heat/Flow analysis, figured the cooling efficiency and factor that can influence to cowl, then confirmed final model by ground test with actual mock-up.
통계분포에 기반한 고해상도 SAR 영상의 변화탐지 알고리즘 구현 및 적용
이기웅 ( Kiwoong Lee ),강서리 ( Seoli Kang ),김아름 ( Ahleum Kim ),송경민 ( Kyungmin Song ),이우경 ( Wookyung Lee ) 대한원격탐사학회 2015 大韓遠隔探査學會誌 Vol.31 No.3
최근 위성 Synthetic Aperture Radar (SAR) 영상의 해상도가 개선됨에 따라 이에 대한 수요가 증가할 것으로 보이며 향후 새로운 응용시장으로 성장할 것으로 예측되고 있다. 특히, 화산이나 지진과 같은 자연 재해에 대한 예측이나 지형의 미세한 변화를 탐지하기 위한 용도로 SAR 영상의 활용도가 증가하고 있다. 기존의 변화탐지 알고리즘을 고해상도 SAR 영상에 적용할 경우, 영상간의 기하학적 구조, 스펙클의 영향 등으로 변화탐지 정확도가 저하될 수 있다. 또한, SAR 영상의 경우 지형적 특성에 따라 영상의 통계적 분포가 다르므로 영상의 통계분포를 반영한 임계값 추정이 필요하다. 본 연구에서는 고해상도 SAR 영상의 통계적 분포특성을 반영하여 임계값을 이용하는 변화탐지 알고리즘을 제안한다. 제안된 알고리즘의 성능을 시험하기 위해 SAR 영상 시뮬레이션을 수행하여 성능을 시험하고 검증하였다. 마지막으로 Cosmo-Skymed 과 다목적실용위성-5 영상에 각각 적용하여 검증하고 비교한 결과를 제시한다 Synthetic Aperture Radar is able to provide images of wide coverage in day, night, and all-weather conditions. Recently, as the SAR image resolution improves up to the sub-meter level, the applications are rapidly expanding accordingly. Especially there is a growing interest in the use of geographic information of high resolution SAR images and the change detection will be one of the most important technique for their applications. In this paper, an automatic threshold tracking and change detection algorithm is proposed applicable to high-resolution SAR images. To detect changes within SAR image, a reference image is generated using log-ratio operator and its amplitude distribution is estimated through K-S test. Assuming SAR image has a non-gaussian amplitude distribution, a generalized thresholding technique is applied using Kittler and Illingworth minimum-error estimation. Also, MoLC parametric estimation method is adopted to improve the algorithm performance on rough ground target. The implemented algorithm is tested and verified on the simulated SAR raw data. Then, it is applied to the spaceborne high-resolution SAR images taken by Cosmo-Skymed and KOMPSAT-5 and the performances are analyzed and compared.