http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Electromagnetic Field Analysis of Magnetic Bearing due to Stator Structure
김기준,신철기,Kim, Ki-Joon,Shin, Cheol-Gi The Institute of Electronics and Information Engin 2011 電子工學會論文誌 IE (Industry electronics) Vol.39 No.4
본 연구에서는 스테이터 구조에 의한 마그네틱 베어링의 전자장해석을 수행하였으며 AMB 시스템의 설계 기준을 얻기 위하여 3가지 방식의 구조에서 전기적 특성을 구하였다. FEM 기법을 이용하여 AMB의 3가지 방식을 시뮬레이션한 결과, 1, 2, 그리고 3번 방식은 N극에서 S극으로 많은 자속선 벡터가 이동하는 것으로 나타났으며, 이 자속선들은 로타로 전달되고 있다. 이 선들은 로타가 회전하는 것을 도와주고 있다. 따라서, 이러한 전기적 특성 자료는 마그네틱 베어링 설계자료로 이용되고, 설계 기준을 만드는데 도움이 될 것이다. In this study, it carried out Electromagnetic Field Analysis of Magnetic Bearing due to stator structure and it got the electrical characteristics of 3 structure types of AMB(Active magnetic bearing) systems to get optimal design criteria. The results of simulation in three types of AMB, using FEM method, type 1, 2, and 3 had many paths to move magnetic flux vectors from N pole to S pole and magnetic flux lines are transferred to rotor as a shaft. The paths help to rotate the rotors. So, their data of electrical properties carry out design of magnetic bearing system and the data help to make design criteria.
오용철(Yong-Cheul Oh),신철기(Cheol-Ki Shin),박건호(Geon-Ho Park),이덕진(Deok-Jin Lee),김충혁(Chung-Hyeok Kim),정한석(Han-Seok Jeong),최명호(Myeong-Ho Choi) 대한전기학회 2010 대한전기학회 학술대회 논문집 Vol.2010 No.7
피복 손상으로 주변 도전체를 통해 누전되었을 때 그 주변의 자장을 검출하여 누전여부를 판단할 수 있는 장치 개발을 하고자 한다. 우선 표면 누전에 의한 전류의 흐름을 조사하고, 전류에 의한 자장을 검출하기 위해 센서를 제작한다. 코어는 요크타입을 적용하였으며, 코일은 0.5㎜ 동선을 4,000회 감았다. 실험환경은 전선피복 손상에 의한 금속표면에 누전되는 상황을 모의하였으며, 부하는 40W, 400W, 1,400W를 적용하였다. 센서는 표면에 발생되는 자장을 검출할 수 있도록 2축으로 구성하였으며, 전선 주변 및 누전된 금속 표면에서 거리변화 및 각도 변화에 따른 자장을 검출하였다.
김기준,오용철,이경섭,정한석,김탁용,최미희,송민영,신철기,김진사,Kim, Ki-Joon,Oh, Yong-Cheul,Lee, Kyeong-Seob,Jung, Han-Seok,Kim, Tag-Yong,Choi, Mi-Hui,Soung, Min-Yeong,Shin, Cheol-Gi,Kim, Jin-Sa 한국전기전자재료학회 2011 전기전자재료학회논문지 Vol.24 No.2
We use the electrical energy and it is essential energy in modern life, but we lay cable underground due to the issue for environment and safety. Safety for worker is still insufficient for the development of safety equipment and related research has been focused on the cable lifetime diagnosis at underground cable work. I have to develop live line detector around the magnetic field were investigated at underground cable. In this paper, we were investigated by variation of coil turns and load due to detection of magnetic field at lines around. And detected value of developing products compared with measured value of milli-gauss meter. As a result, the value of the number of coil turns was found to be proportional to the measured value. But turn-numbers increase showed that the weak noise. I could be confirmed that sensor showed the optimum value from 4,000 to 5,0000.