http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
중수소 프라즈마 처리가 다결정 실리콘 TFT의 안정성에 미치는 영향에 관한 연구
손송호,배성찬,김동환,Sohn Song Ho,Bae S. C.,Kim Donghwan 한국재료학회 2004 한국재료학회지 Vol.14 No.7
We applied a deuterium plasma treatment to the surface of polycrystalline silicon films using PECVD and observed the change with AFM, XRD, ET-IR, and SIMS measurement. A bias temperature stressing (BTS) test was carried out to evaluate the reliability of the thin-film transistors (TFT). TFTs with channel lengths as small as 2 ${\mu}m$ were electrically stressed fer up to 1000 sec at room temperature. From the parameter variation such as s-factor, leakage current and on/off ratio, we suggest that the deuterium plasma treatment suppress the hot carrier effect and improve the stability of TFTs.
배전기기 외함 부착방지 및 자기세정 코팅기술 개발 및 현장실증
심명진,손송호,서지훈,한상철,Shim, Myung Jin,Sohn, Song Ho,Seo, Ji Hoon,Han, Sang Chul 한국전력공사 2020 KEPCO Journal on electric power and energy Vol.6 No.3
전력수요가 많은 도심지역의 전력설비 설치가 늘어남에 따라 다수의 배전용 개폐기, 변압기와 같은 지상기기들이 보도에 설치되어 있다. 도심지역의 경우 매우 가혹한 환경(불법광고물 부착, 자동차 매연, 부식, UV 열화, 오염 등)으로 인해서 0.5-5년 내에 거리의 흉물로 변하고 있다. 불법광고물 무단 부착, 부식, 자동차 매연 및 오염, UV 열화로부터 환경친화형 배전기기를 운영하기 위해서는 광고물 부착방지, 방식, 내구성 향상, 미관 개선 기능의 현장 적용이 가능한 생체모방코팅소재 제조기술과 도포 기술 개발을 필요로 한다. 따라서 도막 경도가 단단한 실리콘레진 기반 도료를 개발하여 부착방지 및 낙서방지 기능 뿐만 아니라 도막 경도를 향상시키는 것으로 박리 현상을 저하시킬 수 있는 도료를 개발했다. 개발된 코팅제는 한국전력공사 대덕유성지사와 공동으로 노은 및 지족동 일대 배전기기 외함 9개소를 대상으로 현장 장기 실증시험을 통한 장기 내구성평가를 진행했다. 전력기기 생체모방 코팅기술은 다양한 손상 환경에 따라서 그 조건에 맞는 최적의 코팅 물질 및 공정 개발이 가능하다. 지속적인 코팅기술 업그레이드로 원천기술 및 지적재산권을 획득하고 전국의 설치된 기기로부터 장기실증 데이터를 취득함으로써 전력기기 운영/정비/보수 시장에 진출하여 경쟁력 있는 사업화의 기반 마련이 가능할 것으로 전망한다. The demand for coating technology on electric power equipment that has arisen from such issues regarding the attaching of illegal advertisements and posters to electric power distribution boxes such as TR, SW, etc. in down town areas seeks to produce functional coating surfaces using polymers and nano-materials that will result in improvements in self-cleaning performance and greater stability even under harsh environmental conditions. KEPCO-coatings consist of copolymerized acrylic resin and methacryl-modified reactive silicone that are able to chemically combine, which results in performance improvement without any leakage of of silicone, thus contributing to its properties of high-stability. Thus, the research team has also started long-term on-site testing on 9 electric power distribution spots around a city center in cooperation with the KEPCO Daeduck-yusung branch. The KEPCO-coating technology could advance the best coating materials and processes to meet appropriate circumstances for a variety of outdoor damage environment. It is also predicted that KEPCO could be possible to expand international electric maintenance markets and to arrange business platforms if KEPCO would achieve its original technology (IPs) by the means of upgrading in self-cleaning coating technology and obtaining long-term on-site test records from nationwide electric facilities.
마용호,이주영,류경우,손송호,황시돌,Ma, Yong-Hu,Li, Zhu-Yong,Ryu, Kyung-Woo,Sohn, Song-Ho,Hwang, Si-Dol 한국전기전자재료학회 2007 전기전자재료학회논문지 Vol.20 No.7
The AC loss is an important issue in the design of the high temperature superconductor (HTS) power cables and fault current limiters. In these applications, a cylindrical HTS conductor is often used. In commercialization of these apparatuses, AC loss is a critical factor but not elucidated completely because of complexities in its measurement, e.g. non-uniform current distribution and phase difference between currents flowing in an individual HTS tape. We have prepared two cylindrical conductors composed of a Bi-2223 tape with different critical current density. In this paper, the AC loss characteristics of the conductors have been experimentally investigated and numerically analyzed. The result show that the measured losses for two conductors are not dependent on both arrangements and contact positions of a voltage lead. This implies that most of loss flux is only in the conductors. The loss for the Bi-2223 conductor with low critical current density is in good agreement with the calculated loss from Monoblock model, whereas the loss measured for the Bi-2223 conductor with high critical current density doesn't coincide with the loss calculated from the Monoblock model. The measured loss is also different from numerically calculated one based on the polygon model especially in low transport current.