http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
가변 핀틀 인젝터에서 핀틀 팁 형상에 따른 분무특성 연구
남정수(Jeongsoo Nam),이건웅(Keonwoong Lee),박선정(Sunjung Park),허환일(Hwanil Huh),구자예(Jaye Koo) 한국항공우주학회 2019 韓國航空宇宙學會誌 Vol.47 No.9
핀틀 인젝터를 사용하는 액체로켓개발에 있어서 분무특성인 분무각도, 액적크기, 액적의 분포정도는 중요한 요소이다. 세 종류의 다중 홀형 핀틀 팁과 연속형 핀틀 팁을 설계하여 분무실험을 수행하였다. 다중 홀형 인젝터에서 홀 개수에 따른 액적크기는 크게 차이가 없었으며, 홀 개수가 많을수록 액적이 균일하게 분포하였다. 연속형 핀틀은 다중 홀형 핀틀보다 액적의 미립화가 잘 이루어지고 공간내로 더 고르게 분산되는 것을 확인하였다. 핀틀의 액체분사면적조절을 통한 추력제어는 다중 홀형보다는 면 접촉 닫힘(face-shutoff)이 용이한 연속형 핀틀이 적합하다. 각 핀틀 팁의 TMR에 따른 분무각을 측정하여 특정한 경향성과 그에 해당하는 경험식을 도출하였다. In the development of the liquid rocket engine using the pintle injector, spray characteristics such as spray angle, droplet size, and distribution of the droplets are dominant parameters. Three different kind of multi hole type pintle tip and a continuous type pintle tip were designed. In the case of multi hole pintle tip, SMD result did not have a significant difference depending on the number of holes. In analysis with visualization images, however, the droplets were uniformly distributed as the number of holes increased. Liquid droplets from continuous type pintle tip were finely atomized and dispersed uniformly than those from multi-hole type pintle tip. In addition, the thrust control by adjusting the liquid injection area of the pintle is suitable for the continuous type, which is easier to face-shutoff rather than the multi hole type. The spray angle of each pintle tip according to TMR was measured to derive a specific tendency and corresponding empirical formula.