http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Rayleigh 및 Rician 페이딩 이동 채널 모델링
남기진 대한전자공학회 2007 電子工學會論文誌 IE (Industry electronics) Vol.44 No.4
In this paper, the performance of simulation model in mobile to mobile Rayleigh and Rician fading channel is analyzed and simulation results are compared. The auto-correlation and cross-correlation functions of Rayleigh fading channels not only based on received signals of Clarke's fading model and but also based on received signals of phase shifted Clarke's fading model are derived and their simulation results are found. The two models are also applied to mobile to mobile Rician fading channel models and their numerical results of auto-correlation functions of complex envelop received signals shows the statistical properties match the theoretical values very well and rapidly converge with the small number such as N=8. 본 논문에서 이동 대 이동 Rayleigh 및 Rician 페이딩 채널 상에서 시뮬레이션 모델의 성능이 분석되고 그 결과가 비교된다. Clarke의 페이딩 모델의 수신 신호 및 Clarke의 페이딩 모델에서 위상 천이된 수신 신호에 근거한 자기 상관 함수 및 상호 상관 함수를 유도하고, 그 시뮬레이션 모델의 결과를 구하였다. 또한 이동 대 이동 Rician 페이딩 채널에 이 두 모델을 적용하고, 복소 포락선 수신 신호의 자기 싱관 함수 결과는 통계적 특성이 이론값과 매우 일치하고, N=8인 작은 수에서도 빨리 수렴함을 보였다.
남기진,이상설 대한전자공학회 1995 전자공학회논문지-A Vol.32 No.1
In order to implement broadband RAM's(Radar Absorbing Materials) made up of multiple dielectricl layers, the design variables such as the dielectrci constaints, the depths and the loss tangents of dielectric are optimized. The wave impedances regarding the reflective wave are found in dielectrics, input impedances and reflection coefficients with multiple dielectric layers are derived from the transmission line circuit theory. Finally, minimum average reflective power and optimum design variables are obtained by applying the numerical technique, called modified Powell method. In case of four dielectric layers with inequality constraints in design variables, a quite favourable and feasible result with the total depth of 1.1 cm, the average reflective power of 0.85% over the bradband frequency range is obtained for a specific example.
남기진,임지원 한국막학회 2019 멤브레인 Vol.29 No.5
In this study, for the improvement of flow pattern with the CDI module that had the larger electrodes, it was designed with the rectangular type which is gradually wider from the inlet. Based on this, both the flow pattern of feed solution and dead zone were observed and the internal pressure, streaming line and velocity vector distribution were analyzed through the computational flow dynamics and compared with the experimental results. For all flow rates of 10, 20, 30 mL/min, there were no dead zones and the flow patterns were maintained constant. Therefore, it may be possible that the larger electrodes are applied to the CDI process. 본 연구에서는 대면적을 지니는 CDI 모듈의 흐름 향상을 위하여 유체가 들어가는 유입구로부터 면적이 증가하는직사각형 형태의 유로를 설계하였다. 이를 바탕으로 설계된 모듈 형태에 대해 공급수의 흐름성과 사영역의 유무를 파악하였고 CFD 전산 유체 역학 프로그램을 통해 유로 내의 내부 압력, 유선 그리고 속도 벡터 분포를 분석하였으며 실제 흐름 관측과 CFD 프로그램을 비교 분석하였다. 실험 결과 모든 유속 10, 20, 30 mL/min에서 유로 내 사영역이 거의 발생하지 않았으며 공급수의 흐름성도 일정하게 유지되어 추후 대면적을 가지는 CDI 공정에 적용이 가능할 것이라 판단된다.