모멘트 링크보의 이력 거동

김태영,김상섭,김영호,정회용,김규석,Kim, Tai-Young,Kim, Sang-Seup,Kim, Young-Ho,Cheong, Hoe-Yong,Kim, Kyu-Suk 한국강구조학회 2003 韓國鋼構造學會 論文集 Vol.15 No.3

The length of the links in an eccentrically braced frame will dictate the behavior of the frame. Link length controls the yielding mechanism and the ultimate failure mode. For short links, the links' shear forces reach the plastic shear capacity before the end moments reach the plastic moment capacity, and the links yields in the shear, forming a shear hinges. These links are termed "shear links." For long links, the end moments reach the plastic moment capacity before the links' shear forces reach the plastic shear capacity, forming moment hinges. These links are termed moment links." In long links, flexural yielding dominates the response, and very high bending strains are required at the link ends to produce large link deformations. In a shear links, the shear force is constant along the length of the links, and the inelastic shear strain are is uniformly distributed over the length of the links. This permits the development of large inelastic link deformations without the development of excessively high local strains. However, The use of eccentrically braced steel frames for the purpose of architectural cionsiderations such as openings and doors, areis dictating the use of longer links, though. Little data areis available on the behavior of long links under cyclic loading conditions. In This paper documents the results of an experimental program is that was conducted to assess the response of moment links in eccentrically braced frames. Sixteen specimens awere tested using a cyclic load. 편심브레이스골조의 설계에서 가장 중요한 인자는 링크보의 길이이다. 링크보의 길이에 따라 편심브레이스골조의 거동과 파괴메카니즘이 결정된다. 링크보의 길이가 짧아져 전단력에 의해 소성화되면 중심브레이스골조와 대등한 수평방향강성과 모멘트 연성골조의 연성을 동시에 확보할 수 있다. 또한 링크보의 길이가 길어지게 되면 링크보는 모멘트에 의해 소성화 되어 연성적인 거동을 확보할 수 없게 된다. 근래에 이르러 건축계획적인 측면에서는 링크보의 길이가 길어지는 것이 입면 및 단면계획이 용이하며, 그 필요성이 증대되고 있지만, 모멘트 링크에 대한 기존의 연구가 많이 수행되어 있지 않으며, 이와 관련된 자료가 부족한 실정이다. 본 연구에서는 실험을 통해 다양한 접합디테일을 가진 모멘트링크보의 거동을 규명하고 모멘트링크보의 거동을 개선시킬 수 있는 접합디테일을 제시하고자 한다. 4개의 접합 디테일을 가진 총 16개의 실험체를 계획하여 이력거동 실험을 수행하였다.

TiAlN 코팅드릴의 구멍가공특성에 관한 연구

김태영,신형곤,김종택,김민호,이한교,Kim, Tae-Young,Shin, Hyung-Gon,Kim, Jong-Taek,Kim, Min-Ho,Lee, Han-Gyo 한국기계가공학회 2004 한국기계가공학회지 Vol.3 No.4

An experimental study on drilling of stainless steel is conducted using TiAlN coated drills and HSS twist drills with several cutting conditions; feed rate, spindle rotational speed, and dry/wet cutting. The effects of number of hole on the thrust force are examined by cutting force measurement. The flank wear of the drills and the change of hole diameter are quantitatively observed using a vision system. It is found that the thrust force in drilling with TiAlN coated drills decrease under dry and wet machining, whereas the flank wear resistance is improved.

LOD기반의 재난안전 정보서비스 확장에 관한 연구

김태영,강주연,김혜영,김용,Kim, Tae-Young,Gang, Ju-Yeon,Kim, Hye-Young,Kim, Yong 한국문헌정보학회 2017 한국문헌정보학회지 Vol.51 No.3

본 연구는 재난안전정보의 효율적인 관리와 제공을 위해 LOD기반의 재난안전정보 서비스 모형을 제안하는데 그 목적이 있다. 이를 위해 온라인 조사 및 오프라인 인터뷰를 수행하여 재난안전정보 제공 현황을 분석하였으며, 재난안전정보를 6가지 영역으로 구분하였다. 재난안전정보 영역과 함께 도출된 재난안전정보 LOD 구축 시 고려해야 할 사항들을 기반으로 본 연구는 재난안전정보 LOD의 구축 과정을 상세하게 제시하였다. LOD 구축 과정은 한국정보화진흥원에서 발간한 링크드 데이터 구축 공정 가이드를 적용하였다. 특히, 재난안전정보 6가지 영역을 토대로 표준용어집 및 모델링 도구를 활용하여 온톨로지 개념 모델을 정의하였으며, 이를 기반으로 클래스와 속성을 제시하였다. 본 연구 결과를 통해 재난안전정보의 활용성이 극대화될 수 있을 것이라 기대할 수 있다. This study aims to propose disaster safety information service model based on LOD for effective management and dissemination of the information. To achieve the aim of this study, current state of disaster safety information was analyzed through online search and face-to-face interviews, and then the information was divided into 6 types. Finally, this study proposed specific process of building disaster safety information LOD service with considerations reflecting the information characteristics. The process for building LOD was based on Guidelines for Building Linked Data written by National Information Society Agency. Especially, ontology concept model was defined by using standard lexical resources and modeling tools based on 6 types of disaster safety information, and classes and properties were proposed. The results of this study will make disaster safety information more useful for common people.

소음인의 구중화(口中和), 구중불화(口中不和)의 의미에 대한 고찰

김태영,박성식,Kim, Tae-Yeong,Park, Seong-Sik 사상체질의학회 2021 사상체질의학회지 Vol.33 No.3

Objectives The purpose of this study is to examine the meaning of the Soeumin's Softness and Non-softness in the mouth(口中和, 口中不和). Methods We examined The Existing Doctors's using of the Softness and Non-softness in the mouth, and considered Jema Lee's using of the Softness and Non-softness in the mouth. Afterward, we considered the meaning of the Soeumin's Softness and Non-softness in the mouth in 『Donguisusebowon(東醫壽世保元)』. Results and Conclusion 1. Junggyeong Jang used the Softness in the mouth, and he didn't use the Non-softness in the mouth in 『Sanghanlun(傷寒論)』. 2. The Next Generation Doctors used the Softness in the mouth, and they didn't use the Non-softness in the mouth. Especially, Dongwon Lee used the Softness in the mouth as the Knowing the taste of food, and used the Non-softness in the mouth as the Non-knowing the taste of food. 3. Jema Lee used the Softness and Non-softness in the mouth as urgent indicator of the Soeumbyeong diarrhea in 『Gabobon(甲午本)』, and used the Softness and Non-softness in the mouth as classification indicator of the Taeeumbyeong and Soeumbyeong in 『Sinchuckbon(辛丑本)』. 4. The Non-softness in the mouth is Jema Lee's specific term. It means dry of mouth, thirsty and the Non-knowing the taste of food. 5. The change from the Non-softness to Softness in the mouth is recovery indicator of the Soeumin's disease. It is the basis for setting the Drinking water(能飮水) as the Soeumin's igiljeung(二吉證).

宇治十帖の方途-薫の道心と恋の構造

김태영 ( Tae-young¸ Kim ) 한림대학교 일본학연구소 2020 翰林日本學 Vol.0 No.37

本稿では、第三部の物語のはじめの部分といえる「匂宮三帖」における薫の道心と恋のあり方について考察した。第三部の最初の巻「匂兵部卿」には、薫が初めて登場し、彼の道心の由来が述べられている。「匂兵部卿」巻の表現構造では、光源氏と薫を比較対照しつつ、薫のみではなくその道心をも相対化している語りの構造が見られる。薫の道心は彼の幼い時に聞いた自らの出生に関する疑惑に根ざしている。薫は自分の実父が柏木であることを知っているが、以後の物語において、柏木の罪が薫の内面において深く問い直されることはなく、薫の出生の秘密が外化する方向にも物語は展開しない。薫における柏木の「罪」の行方は、第三部の三番目の巻「竹河」と「匂兵部卿」巻との比較を通じて明らかになる。竹河巻は、匂兵部卿巻に語られていたことを「ひが事」と否定することにより、薫の出生の秘事を表面上払拭し、薫の恋における姿を語り出すことができたと考えられる。また、竹河巻では、表面上は薫の秘事について語らない形式を取りつつも、語りや表現のレベルにおいて薫における柏木の「影」を暗示していく〈物語の方法〉が用いられており、こうした〈語りの方法〉は「宇治十帖」において一貫して見られている。竹河巻は、まさしく「宇治十帖」の序として、主人公薫の生のあり方、薫をめぐる語りの方法を象徴的に示している巻であると思われる。 In 「Niobyeongbukyeong」 which is the first volume of 『Genji Monogatari』 composed of three parts, the main character, Kaoru appears for the first time, and the origin of his Buddhist doctrines is described. In the analysis on the representation structure of the relevant volume, it takes the structure of katari that relativizes not only Kaoru, but also his Buddhist doctrines by comparing and contrasting Hikaru Genji and Kaoru. Kaoru’s Buddhist doctrines is rooted in his doubt about his own birth that was told in his childhood. Even though Kaoru knows that his real father is Kashiwagi, the following monogatari does not describe the scenes in which Kaoru agonizes over Kashiwagi’s sin, and does not even reveal the secret of Kaoru’s birth. The monogatari in the third part does not show the method to explore the meanings of < sin > in the character’s inner side just as the second part. The third volume 「Takegawa」 of the third part is very remarkable in the aspect of issues like gatari and character set-up. The volume 「Takegawa」 denies what has been told in the volume 「Niobyeongbugyeong」 as a 「wrong story」, which is to superficially dispel the secret of Kaoru’s birth, and also to start talking about Kaoru’s look of love.

서울우리소리박물관 건립공사 건설사업관리(CM) 사례

김태영,조문규,Kim, Tae-Yeong,Jo, Mun-Gyu 한국건설관리학회 2021 건설관리 : 한국건설관리학회 학회지 Vol.22 No.3

군사회복지사, 국방력 강화의 기본

김태영,Kim, Tae-Yeong 한국사회복지사협회 2005 Social workers Vol.7 No.-

사회복지시설 운영 이제 민주화를 원한다

김태영,Kim, Tae-Yeong 한국사회복지사협회 2005 Social workers Vol.7 No.-

미신소 시설 10년 전보다 4배 증가 7월 데드라인에 따른 대책 시급

김태영,Kim, Tae-Yeong 한국사회복지사협회 2005 Social workers Vol.7 No.-

한국인에 대한 가변형 치과 인상용 트레이의 적합성에 관한 연구

김태영,동진근,조혜원,Kim Tae-Young,Dong Jin-Keun,Cho Hye-Won 대한치과보철학회 2006 대한치과보철학회지 Vol.44 No.4

Purpose : this study was to evaluate the fitness of adjustable dental impression trays on the Koreans : the trays used in the previous study by Kim et al. as part of the dental adjustable tray development project were improved and modified. Material and method: The patterns of tray were made through CAD-CAM process, and a simple silicone-base molds were made from them. The trial products were reproduced by pouring polyurethane into these molds. 30 male students(Wonkwang University, Dental College) and 30 female students (Wonkwang Health Science College, Department of Dental Hygiene) were selected and Reversible hydrocolloid impression materials were used for this study. The fitness of the trays was evaluated by measuring the width and length of impression materials of each measurement sites. Results and conclusion : 1. In adapting the trays inside the mouth, a uniform width of impression material(3 $\sim$ 6mm) was obtained in most sites due to the tooth stops and the inclined planes accommodating the width of the tray 2. The thickness of impression material in the central part of the palate was a mean 9.8mm, which turned out to be somewhat thick. 3. In the mandible. the thickness of the impression material in the lingual side inferior to the contact point of the 1st and 2nd molars was 2.7mm, and the thickness of the material in the lingual side of the rearmost margin was 2.5 mm. The thickness of the impression material of these areas was relatively thin.