http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
자성유체가 구동원으로 사용된 엑츄에이터에 대한 실험적 연구
김중(J.Kim),오창복(C.B.Oh),전운학(U.H.Chun) 한국자동차공학회 1998 한국자동차공학회 춘 추계 학술대회 논문집 Vol.1998 No.11_2
The basic characteristics of actuator are a displacement, velocity and force of driving body. This paper describes the force among that of actuator. A length and diameter of straight tube are selected condition that can stabilize the magnetic fluid plug in the U-type tube. Load cell measures a force and response of magnetic fluid for a supplied voltage. A force that is generated by magnetic fluid in the straight tube have the magnetic body force, potential energy of a cluster and so on.<br/>
한상호,김윤중,김정현,김동준,정종윤,김성인,조광섭,Han, S.H.,Kim, Y.J.,Kim, J.H.,Kim, D.J.,Jung, J.Y.,Kim, S.,Cho, G.S. 한국진공학회 2011 Applied Science and Convergence Technology Vol.20 No.4
열전소자를 사용하여 발광다이오드의 방열효과를 조사하였다. 열전소자의 냉각기능인 펠티에 효과(Peltier effect)를 이용하여, 고전력 발광다이오드의 방열과 p-n접합부의 온도를 제어하였다. 정격전류(350 mA)에 대한 고전력(1 W급) 발광다이오드(Light Emitting Diodes: LEDs)의 온도와 p-n접합부 온도는 각각 $64.5^{\circ}C$와 $79.1^{\circ}C$이다. 열전소자의 입력 전력 0.1~0.2 W에 대하여, LED의 온도와 접합부 온도는 각각 $54.2^{\circ}C$와 $68.9^{\circ}C$로 낮아진다. 열전소자에 입력 전력을 0.2 W 이상으로 증가할수록, LED의 온도와 접합부의 온도가 상승한다. 이는 열전소자에 의하여 흡수된 열이 LED로 역류하기 때문이다. 따라서 열전 소자의 냉각기능을 유지하기 위하는 열의 역류를 제어하여야 하며, 열의 역류는 LED의 온도와 방열장치의 온도 차가 클수록 커진다. The heat temperature of a light emitting diode (LED) is investigated with the thermoelectric device (TED). The Peltier effect of the thermoelectric device is used to control the heat radiation and the junction temperature of high-power LEDs. For the typical specific current (350 mA) of high-power (1 W) LEDs, the LED temperature and the p-n junction temperature become $64.5^{\circ}C$ and $79.1^{\circ}C$, respectively. For 0.1~0.2 W driving power of TED, the LED temperature and the junction temperature are reduced to be $54.2^{\circ}C$ and $68.9^{\circ}C$, respectively. As the driving power of the TED increases over 0.2 W, the temperature of LED itself and the junction temperature are increased due to the heat reversed from the heat-sink to LED. As the difference of temperature between LED and the heat-sink is increased, the quantity of reversed heat becomes larger and it results to degrade the cooling capability of TED.