http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
김원석,김영석,전성배,전상호,이의석,장현석,권종진,임재석,Kim, Won-Seok,Kim, Young-Seok,Jeon, Seong-Bae,Jun, Sang-Ho,Lee, Eui-Suk,Jang, Hyon-Seok,Kwon, Jong-Jin,Rim, Jae-Suk 대한악안면성형재건외과학회 2012 Maxillofacial Plastic Reconstructive Surgery Vol.34 No.2
Purpose: The purpose of this study was to evaluate the expression of osteogenic genes associated with bone regeneration on anodizing titanium surface. Methods: $20{\times}20{\times}1$ (mm) commercially pure titanium plate was made, one group was pure titanium, second group was punched, and last group was punched and anodized by electrochemical method. Through the osteogenic cell culture model, the expression of extracellular matrix proteins, such as bone morphogenetic protein-2, bone sialoprotein, aggrecan, osteocalcin, Alkaline phosphatase, collagen I had been evaluated by Real-time polymerase chain reaction, and the morphology of growing cells was evaluated by scanning electron microscopy. Results: The attachment of mesenchymal stem cell was even and well-oriented on all Ti surfaces. The osteogene expression was increased on punching groups but, decreased on anodizing surfaces in 3 week samples. Conclusion: Punched anodizing Ti has possibility be using as a dental implant material, but further in vivo study would be needed.
오존(O<sub>3</sub>) 노출에 의한 조각깔따구(Glyptotendipes tokunagai)의 체색 변화 및 heat shock protein 70 발현 변화
김원석,최보형,김문경,채선하,곽인실,Kim, Won-Seok,Choi, Bohyung,Kim, Moon-Kyung,Chae, Seon Ha,Kwak, Ihn-Sil 한국하천호수학회 2020 생태와 환경 Vol.53 No.4
오존은 수돗물 정수장에서 이용되는 소독 물질로 미세오염 물질들을 비롯해서 박테리아나 병원성 미생물체를 효과적으로 제거하는 것으로 많은 연구가 보고되어 있다. 본 연구에서는 실내 사육 중인 붉은 체색을 지닌 Glyptotendipes tokunagai를 대상으로 서로 다른 농도의 오존 노출에 따른 영향을 파악하기 위해 치사율, 체색 변화와 heat shock protein 70 (HSP70) 유전자 발현을 측정하였다. 오존에 노출된 G. tokunagai에서 농도-시간 의존적으로 치사율 증가가 관찰되었다. 또한 체색 변화는 오존 농도에 따라 붉은색의 체색이 체절마다 엷어지며 탈색되고 경직되는 현상이 보였다. HSP70 유전자 발현은 저농도인 0.2~0.5 ppm에서 노출 10분과 20분에 유의한 수준으로 높게 나타났으나(P<0.05), 30분 노출 후에는 발현량이 감소하는 경향을 보였다. 생리적으로 저산소층에 대해 적응능력이 뛰어난 깔따구 경우에도 오존은 매우 강력한 치사 효과를 유발하여 30분 노출 후 경직과 헤모글로빈 파괴로 인한 탈색이 유발되는 것을 보여주었다. 따라서 본 결과는 수돗물 정수장에서 병원성 미생물을 제거하는 데 사용되는 오존이 수생물에 주는 영향성을 파악하는 기초자료로서 활용될 수 있을 것이다. Ozone (O<sub>3</sub>) is a general disinfectant to remove micro-pollutants in water treatment system. Previous studies have reported effect of ozone to bacteria and pathogens removal, but its effect to the relatively large organisms has little known. In this study, we investigated potential effects of ozone toxicity to the non-bite midge larvae (Glyptotendipes tokunagai) with accumulate mortality, coloration change and expression of heat shock protein 70 (HSP70). The accumulate mortality rate of G. tokunagai increased in a dose-time dependent manner and the highest mortality rate was observed to 75% at 30 minute of exposure duration with 2.0 ppm of ozone concentration. Exposure to ozone was a factor increasing body color of the larvae. The tendency of HSP70 mRNA expression showed up-regulation in ozone exposure at 20 minute. After that time, the expression of HSP70 in exposed group decreased to a similar level of control group. Our results clearly showed that ozone toxicity affects physical and molecular activity of G. tokunagai, implying the potential hazardous of ozone in the aquatic ecosystem including macroinvertebrates.
ADI 의 기계적 성질에 미치는 합금원소 및 열처리의 영향
김원석,우기도 ( Sug Won Kim,Sang Won Han,Kee Do Woo ) 한국열처리공학회 1998 熱處理工學會誌 Vol.11 No.2
N/A The effects of alloying elements(Mo, Cu, Ni) and austempering temperature conditions on the microstructural morphologies and mechanical properties in austempered ductile cast iron has been investigated. The austempering at 350℃ for 2hrs after austenitizing at 900℃ for 2hrs in all specimens with various alloying elements was optimum because the good combination of tensile and yield strength, hardness and impact value was obtained. The microstructures of these ADIs treated by a forementioned austempering condition are nearly a mixture type of needle and feathery bainite. Among those alloys, Mo-Cu alloyed DCI had the best optimum mechanical properties of hardness and toughness for automobile parts by austempering treatment for 2hrs at 900℃ followed by 350℃ for 2hrs.
염분 노출에 따른 Chironomus riparius의 성장지연과 Heat shock protein 70 유전자 발현
김원석,임병현,홍철,최승원,박기연,곽인실,Kim, Won-Seok,Im, Byeong-Hyeon,Hong, Cheol,Choi, Seung-Won,Park, Kiyun,Kwak, Ihn-Sil 한국하천호수학회 2017 생태와 환경 Vol.50 No.3
We investigate that the impact of freshwater organism exposed to the salinity environment by the frequent rainfall following climate change. To evaluate the stress response following salinity exposure, we assessed the survival rate, molting success rate, the developmental period and mouthpart deformities in Chironomus riparius. In addition, we measured the molecular responses of biomarker gene, gene expression of heat shock protein 70 (HSP70) in C. riparius exposed to salinity after 96 hour. The C. riparius survival rates were showed on time dependent manner and not observed survival organisms above 15 psu at day 4. The pupation and emergence of C. riparius were not seen above 15 psu, and the molting success rate was less than 20% at 10 psu. The developmental retardation of C. riparius was well observed in the pupation and emergence period and was delayed by 4 days at 10 psu compared to the control and 5 psu. The mouthpart deformities after salinity exposure at 96 or 72 hour were observed at 10 psu and 15 psu. The expression of C. riparius HSP70 level was significantly increased exposure to 5 psu and 10 psu. Thus, salinity has been caused to be various ecotoxicological and molecular stress responses on freshwater organisms similar to harmful substances such as EDCs and so on. 기후변화로 잦아진 강우에 의해 염분 환경에 유입되는 담수생물의 영향을 파악해 보고자 하였다. 담수의 오염지표생물인 깔따구과의 실내 실험종인 C. riparius를 대상으로 염분 노출에 따른 스트레스 반응으로 생존율과 탈피율, 성장기간, 하순기절 기형을 분석하였고, 분자생물학적으로 스트레스 분자마커로 연구가 이루어진 HSP70 유전자 발현을 측정하였다. C. riparius의 생존율은 노출시간에 따라 감소하였으며 15 psu에서 4일이 경과하면 생존개체가 관찰되지 않았다. C. riparius의 pupation과 emergence는 15 psu 이상에서는 보이지 않았고 탈피의 성공은 10 psu에서 20% 이하였다. 또한 C. riparius의 성장지연은 pupation과 emergence 기간에서 잘 반영되어, 대조군과 5 psu에 비해 10 psu에서 4일이 늦어졌다. 염분 노출 96시간 후 관찰한 C. riparius 하순기절 형태 이상은 10 psu와 15 psu에서 소수 관찰되었다. C. riparius HSP70 유전자 발현은 대조군에 비해 5, 10 psu에서 약 2.5~4배 이상 발현량이 크게 증가하였다. 따라서 염분은 담수생물에게 매우 큰 스트레스를 제공하는 원인물질로 유해물질과 유사한 생태독성학적인 반응과 분자지표 반응을 보여주었다.
김원석 ( W. S. Kim ),이기명 ( K. M. Lee ),차충근 ( C. K. Cha ),김덕기 ( D. K. Kim ),김영배 ( Y. B. Kim ),유병무 ( B. M. Yoo ),김진홍 ( J. H. Kim ),김영수 ( Y. S. Kim ),조성원 ( S. W. Cho ),함기백 ( K. B. Hahm ) 대한소화기학회 2002 대한소화기학회 춘계학술대회 Vol.2002 No.-
위암의 발생에 관여하는 종양 억제 유전자로는 p53이 잘 알려져 있으며, 주요 작용 기전 중의 하나가 apoptosis 장애 및 cell cycle 조절 실패로 보고되고 있다. 그러나 위암에서 p53의 변이는 30-65% 정도로 보고되고 있어 나머지 위암에서 발암 기전은 의문으로 남아있다. 최근에는 pS2/TFF1 단백질의 변이가 암화의 초기에 관여한다는 사실과 pS2/TFF1 knockout mice에서 위암의 발생되었다는 보고로 위암 발생시 pS2/
김원석 ( Won-seock Kim ),김경철 ( Kyung-chul Kim ),정우철 ( Woo-cheol Jung ),김화남 ( Hwa-nam Kim ) 한국복합재료학회 2020 Composites research Vol.33 No.6
열가소성 복합재료를 적용하여 자동차 도어 임팩트 빔을 설계하고 시생산을 통해 생산성 및 성능을 검증하였다. 자동차 안전법규는 지속적으로 강화되어 왔으며 최근 자동차 산업에서 경량화가 필수 요건이 되면서 고성능 경량 부품에 대한 요구가 크게 증대되고 있다. 본 연구는 섬유강화 열가소성 복합소재를 도입하여 기존 탄소강 제품 대비 경량화 되면서 성능은 향상된 도어 임팩트 빔 개발을 목표로 하였다. 연속섬유 복합재료와 장섬유 복합재료(LFT)를 혼합 적용한 도어 임팩트 빔 제작 공정을 제시하며, 생산성이 우수한 인서트 사출 공정을 활용하여 구현하였다. 시생산된 도어 임팩트 빔은 3점 굽힘 시험을 통하여 성능을 평가하였다. 열가소성 복합재료는 경량화 설계와 함께 높은 생산성 구현이 가능하여 다양한 자동차 부품으로 복합소재의 적용을 확대시킬 것이다. Thermoplastic composite is introduced to design an automotive door impact beam, and the manufacturing process is demonstrated. The safety regulation for vehicles has been steadily tightened, and weightreduction has become a mandatory factor in the automotive industry. Hence, both high-performance and lightweight are demanded for automotive components. The aim of the present study is to develop an automotive door impact beam using fiber-reinforced thermoplastic composites to reduce the weight of the impact beam while increasing its mechanical performance. A new production method which combines continuous fiber-reinforced composite and LFT(Long Fiber-reinforced Thermoplastic) is implemented by using insert injection molding process. The mechanical performance of the composite impact beam was evaluated using 3-point bending tests. Thermoplastic composite will expand its application range to various automotive components due to its light-weight design capability and high productivity.