http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
백종현(J. H. Baek),김철만(C. M. Kim),김영표(Y. P. Kim),김우식(W. S. Kim),구재민(J. M. Koo),석창성(C. S. Seok) 한국가스학회 2009 한국가스학회 학술대회논문집 Vol.2009 No.10
덴트결함 배관의 하중지지능력은 굽힘응력 부가방식에 따라 변화하며 opening bending이 가해지는 경우가 closing bending에 비하여 더 높은 하중지지능력을 나타내며, 덴트결함 깊이와 내압 증가에 따라 굽힘응력 부가방식에 관계없이 TES 모멘트는 감소하며, 덴트결함 깊이 변화에 의한 TES 모멘트는 식 (1)을 이용하여 예측 할 수 있다.
삼축응력 기반의 파괴변형률 기준을 적용한 가우지 손상배관의 건전성 평가
오창균(C. K. Oh),김윤재(Y. J. Kim),박진무(J. M. Park),백종현(J. H. Baek),김영표(Y. P. Kim),김우식(W. S. Kim) 한국정밀공학회 2005 한국정밀공학회 학술발표대회 논문집 Vol.2005 No.10월
Structural integrity assessment of defected pipe is important in fitness for service evaluation and proper engineering assessment is needed to determine whether pipelines are still fit for service. This paper present a failure prediction of gas pipes made of API X65 steel with gouge using stress-modified true fracture strain, which is regarded as a criterion of ductile fracture. For this purpose, API X65 pipes with gouge are simulated using elastic-plastic FE analyses with the proposed ductile failure criterion and the resulting burst pressures are compared with experimental data. Agreements are quite good, which gives confidence in the use of the proposed criteria to defect assessment for gas pipelines. Then, further extensive finite element analyses are performed to obtain the burst pressure solution of pipes with gouge as a function of defect depth, length and pipeline geometry.
( O / W ) / O 에멀젼형 액막을 이용한 탄화수소 혼합물의 분리
정민조,박함용,오준택,김종국,신명훈,김우식 ( M . C . Jeong,H . Y . Park,J . T . Oh,J . K . Kim,M . H . Shin,W . S . Kim ) 한국공업화학회 1997 공업화학 Vol.8 No.5
(O/W)/O 에멀젼형 액막을 이용하여 비점이 비슷한 벤젠-싸이클로헥산 혼합물을 분리하였다. 액막 제조 조건이 선택도, 회수율 및 에멀젼 액적의 크기에 주는 영향을 고찰하였으며, 다단 맥동 추출탑을 이용한 연속 추출 실험을 통하여 비정상상태와 정상상태에서의 추출거동을 검토하였다. 추출실험결과 유화 교반 속도 4000rpm, Tween 80 농도 0.4 %, 내유상에 대한 막상의 부피비 0.75, 연속상에 대한 분산상의 부피비 0.5, 투과시간 10 분에서 선택도 및 벤젠의 회수율이 가장 좋았다. 에멀젼 액적의 크기 분포 측정 결과, 교반속도가 커질수록 또는 분산상의 microdrop holdup이 작을수록 분산상 액적의 평균크기가 작았으며, 분산상 microdrop holdup의 영향을 고려한 modified Calabrese의 식을 적용한 결과 turbulence damping constant의 값은 2.28이었다. 연속 추출 실험 결과 탑내 교반속도 300rpm, 맥동 횟수 2times/sec, 연속상 유속 30ml/min, 에먼젼상 유속 12.0ml/min에서 가장 좋은 추출 효과를 얻을 수 있었다. The separation of benzene-cyclohexane mixture using (O/W)/O emulsion liquid membrane was studied. The operating parameters which can affect the selectivity, benzene yield, and emulsion size distribution were examined and determined by the batch type operation. The unsteady state and steady state extraction behavior in continuous pulse stirred reactor(CPSR) were verified. The optimum conditions for benzene selectivity and yield in batch operation were as follows; emulsion mixing intensity 4000 rpm, Tween 80 concentration 0.4%, volume ratio of membrane phase to internal phase 0.75, volume ratio of dispersed phase to continuous phase 0.5, and permeation time 10 minutes, As impeller speed increased and the microdrop holdup decreased, the Sauter mean diameter decreased. Turbulence damping parameter of modified Calabrese correlation considering microdrop holdup was 2.28. The optimum conditions of continuous operation were as follows; agitation speed 300 rpm, pulse frequence 2 times/sec, flow rate of continuous phase 30 ml/min, and flow rate of emulsion phase 12.0 ml/min.