http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
폐PET섬유를 혼입한 시멘트모르터의 역학적 특성에 관한 연구
김영근,김상철,김명훈,Kim, Young-geun,Kim, Sang-cheol,Kim, Myung-hoon 한국건축시공학회 2002 한국건축시공학회지 Vol.2 No.4
In this study we intended to investigate properties of cement mortar with recycled PET fiber, PE fiber. and PP fiber such as slump flow, compressive strength, tensile strength, and flexural strength. At results of experiment. several properties of specimen with recycled PET fiber were little low comparing those of specimen with PE fiber and PP fiber. But if we see from point of economy and recycle of industrial wastes, it has enough reason to be used. Compressive strength of specimen with recycled PET fiber at 55 days was about 10% higher. but tensile strength and flexural strength were lower than that of no-fiber.
김영근,김우성,위용곤,김남영,이호석,Kim, Young-Geun,Kim, Woo-Sung,Wye, Yong-Gon,Kim, Nam-Yung,Lee, Ho-Suk 한국터널지하공간학회 2003 터널기술 Vol.5 No.2
최근 도로설계시 두 개의 터널이 짧은 거리로 계속적으로 존재하는 연속터널에 대한 설계사례가 증가하고 있다. 이러한 경우에 있어, 한 터널내에서 발생한 오염물질은 다른 터널로 재유입하여 터널환기 시스템에 중대한 영향을 미치게 되므로, 이에 대한 적절한 환기검토가 수행되어야 한다. 본 연구에서는 동해 고속도로 설계시 나타난 연속터널을 대상으로 하여 1차원 터널내 오염농도 해석 및 3차원 CFD 해석 프로그램을 사용하여 터널내 오염농도의 거동 및 터널 갱구부 주변의 오염물질의 재유입 여부를 분석하여, 연속터널에 대한 터널내 외부유동에 대한 환기영향을 검증하였다. 이를 위하여 해당지역인 속초지방의 기상데이터를 분석하고, 기상조건에 따른 터널내부의 공기환경을 검토하였으며, 3차원 시뮬레이션을 통하여 각각의 터널에 대한 재유입 여부 및 재유입율을 분석하였다. Recently, there are many cases in the roadway design for successive tunnel with small distance between two tunnels. In this case, the degree of interference for successive tunnels is a significant consideration in the design of ventilation systems. Also, Re-inflows of contaminated air in successive tunnel make serious ventilation problems in case of fire accident in the tunnel. In this study, for successive tunnels in Donghae highway project, the concentration of contaminant such as CO, NOx and Smoke were calculated by numerical analysis using 1D and 3D-CFD analysis. And, the rate of re-inflow at the portals of successive tunnel according to the direction of wind were analysed.
Comparative risk analysis of NATM and TBM for mixed-face large-diameter urban tunneling
김영근,문준식,심재범,이승복,최창림,천윤철,Kim, Young-Geun,Moon, Joon-Shik,Shim, Jai-Beom,Lee, Seung-Bok,Choi, Chang-Rim,Chun, Youn-Chul Korean Tunnelling and Underground Space Associatio 2011 한국터널지하공간학회논문집 Vol.13 No.1
터널 공사 중 많은 문제를 야기시킬 수 있는 불확실한 지반상태 및 터널 공법에 따른 여러 리스크를 최소화 할 수 있도록 전반적인 위험도 평가를 터널 설계 시 반드시 수행하여야 한다. 본 연구에서는 도심지 및 하저터널 구간의 터널공법으로 NATM 또는 쉴드 TBM 적용시 공법별 발생할 수 있는 리스크에 대하여 분석하였다. 우선 연구대상 지역의 주요 리스크 항목을 선정한 후 공법적용시 발생 가능한 리스크와 그 영향을 검토하고, 각각의 리스크 발생가능성과 터널공사에 미치는 위험도에 따라 정량적으로 등급화 하였다. 이러한 리스크 분석을 통하여 주요 위험도 영향을 고려한 공사비 및 공기분석을 수행하고 터널공법별 비교위험도를 평가하였다. 본 연구결과를 바탕으로 복합지반으로 구성된 도심지 대단면 터널에 대해 리스크 발생을 최소화 할 수 있는 안전하고 경제적인 터널공법을 선정하였다. 단, 본 연구는 국한된 지층 및 특별조건에서의 비교위험도를 평가한 결과임을 밝혀둔다. The risk assessment is essential for tunnel design in order to minimize risks associated with uncertainty about geological conditions and tunneling method. This paper provides a comparative risk analysis of a large single bore TBM driven tunnel against sequentially excavated NATM tunnel for a mixed-face large-diameter urban tunnel project near or under a river. The focus of this assessment is on the risks associated with the tunnel excavation methods, in particular whether a TBM or NATM presents more or less risk to achieve the planned excavation duration and bring the project within the estimated bid price. First, the impacts and risks to tunnel construction under each method were discussed, and the risks were scored and ranked in the order of perceived severity and likelihood. Finally, the assessment from a risk based perspective was conducted to decide which alternate tunneling method is more likely to deliver the project with the least time and cost. It is very important to note that this study is only applied to this tunnel project with specific geological conditions and other contract requirements.
김영근,Kim, Young-Geun 한국재난정보학회 2022 한국재난정보학회 논문집 Vol.18 No.3
Purpose: It is intended to prevent similar and similar disasters in advance by classifying the types of industrial accidents by type of distribution center and establishing countermeasures. Method: Development of improvement measures by analyzing in detail the types of occurrences of each type of 5 years in the distribution center. Result: Through the analysis of industrial accidents that occurred in the distribution center, it was possible to find ways to reduce disasters. Conclusion: It is expected to help reduce the disaster rate of the distriution center by presenting a disaster reduction plan through the analysis of industrial accidents in the distribution center.