http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
반응성이 있는 메타크릴레이트 공중합체를 이용한 정전용량형 습도센서
공명선,이임렬 한국마이크로전자및패키징학회 2003 마이크로전자 및 패키징학회지 Vol.10 No.4
정전 용량형 고분자막 감습재료로 사용하기 위하여 서로 반응성이 있는 공중합체들 methyl methacrylate (MMA), ethyl methacrylate (EMA), acrylic acid (MA) 와 hydroxyethyl methacrylate (HEMA)의 공중합체들을 합성하였다. 정전 용량형 습도센서는 가교화된 폴리메타크릴레이트 공중합체 막의 양면에 금 전극을 형성시켜 제조하였다. 공중합체에서의 HEMA양이 증가할수록 상대습도에 따른 정전 용량은 증가하였다. MMA/MA/HEMA=40/10/10의 경우, 상대습도가 30%RH, 60%RH 및 90%RH에서의 정전 용량은 각 102, 134와 165 pF이었다. 또한 히스테리시스, 온도 사이클 그리고 장기안정성 결과를 측정하여 정전용량형 습도센서로서의 특성을 평가하였다. The copolymers with various composition of methyl methacrylate (MMA), ethyl methacrylate (EMA), methacrylic acid (MA) and hydroxyethyl methacrylate (HEMA) were synthesized for capacitive humidity sensitive materials. The capacitive humidity sensor consisted of a polymethacrylate film coated on both sides with gold electrode. Capacitance versus relative humidity increased with HEMA content in the copolymer. In the case of self-crosslinkable MMA/MA/HEHA= 40/10/10, the average capacitance at 30%RH, 60%RH and 90%RH are 102, 134 and 166 pF, respectively. And also, the hysteresis, temperature cycle and long-term stability were evaluated as a capacitance humidity sensor.
4차 염화 가교화된 4-vinylpyridine 공중합체들을 사용한 습도센서의 감습 특성
공명선,이성수,이임렬 한국전기전자재료학회 2001 전기전자재료학회논문지 Vol.14 No.4
The polymers with various composition of 4-vinylpyridine (4-VP) with n-butyl acrylate (n-BA) and 2-hydroxypropyl methacrylate (HPMA) were synthesized as a humidity sensitive material and quaternized with 1.5-dibromopentane. Resistance versus relative humidity decreased with increase in the content of n-BA in the copolymer. The introduction of HPMA increased the resistance of the humidity sensor as well as enhanced the adherence to the alumina substrate. In the case of 4-VP/n-BA/HPMA=80/10.10, the hysteresis and temperature coefficient were $\pm$2%RH and -0.42∼0.46%RH/$\^{C}$. The average resistance at 30%RH, 60%RH and 90%RH are 3.1㏁, 155 ㏀ and 7.9 ㏀, respectively.
공명선,조준상,이학민,김경호 경북대학교 센서기술연구소 1991 센서技術學術大會論文集 Vol.2 No.1
고분자 습도센서의 감습재료로 이용하고자 4-vinylpyridine (4-VP) 과 methylmethacrylate(MMA) 의 공중함체를 전극에 도포한 후 α, ω-dihaloalkane으로 4 차 암모늄화시킨 후 습도변화에 따른 전기저항을 측정한 결과 소수성 모노머인 MMA의 양이증가할 수록 전기저항이 증가하였으며, 또한 α, ω-dihaloalkane에 의한 4차 암모늄화 반응시간에 따라서도 전기저항의 크기 및 감습막의 안정성에 차이가 있음을 알 수 있었다. In order to for a humidity sensitive material of polymeric humidity sensor, a copolymer of 4-vinylpyridine (4-VP) and methylmethacrylate (IBA) is coated on the electrode and then 4 quartermization by α, ω-dihaloalkane, and thereafter measured the electrical resistance due to humidity variation. As a result, the more content of MMA which is a hydrophobic monomer is increased, the more property of electrical resistance is increased. Also, according to the reaction time in 4 quarternization by α, ω-dihaloalkane we can see the diferences of the magnitude of electrical resistance and the stability of humidity -sensitive membrane.
공명선,금내리 한국마이크로전자및패키징학회 2004 마이크로전자 및 패키징학회지 Vol.11 No.1
습도센서의 감습막으로 응용하기 위하여 폴리이온넨계 전해질 잉크를 제조하였다. 감습필름 은 금전극이 인쇄된 알루미나 기판 위에 잉크젯 인쇄 기법을 사용하여 도포 하였다. 또한 methyl methacrylate, acrylic acid, 2-hydroxyethyl methacrylate 그리고 [(2-methacryloyloxy)ethyl)ethyl]trimethylammonium chloride의 공중합체를 합성하였으며, 이것은 침적코팅에 의한 감습막 제조에 사용하였다. 상대습도에 따른 전기적 특성을 측정하였으며 침적코팅에 의한 습도센서와 비교하였다. 습도센서는 상대습도가 증가함에 따라서 저항의 감소함을 보여주었으며 그들의 저항특성은 시료간에 가깝게 일치함을 보여주었다. The modified polyionene polyelectrolyte inks were newly prepared and applied to the humidity-sensitive membrane of humidity sensor. The films were fabricated on the alumina substrate with comb-type gold electrode using a ink-jet printing technique. The copolymers of methyl methacrylate, acrylic acid, 2-hydroxyethyl methacrylate and [(2-methacryloyloxy)ethyl]trimethylammonium chloride were also prepared for the humidity-sensing material. which was fabricated by dip-coating method. Electrical measurements under various relative humidity were performed. The humidity-sensitive characteristics of sensors obtained by ink-jet printing technique were compared with that of dip-coating method. Humidity sensors showed a decrease in resistance as an increase of relative humidity and their resistance characteristics are in a close agreement each other.
공명선,조현기 단국대학교 신소재기술연구소 1991 신소재 Vol.1 No.-
고분자막 습도 센서의 감습 재료를 합성하기 위하여 4-chloromethyl styrene(4-CMSt)과 methylmethacrylate(MMA)의 여러 가지 조성의 공중합체를 합성하여, 이를 전극에 도포하고 N, N, N', N'-tetramethyl ethylene diamine으로 4차 암모늄화 시켰다. 상대 습도에 따른 impedance 변화를 측정한 결과, 공중합체에서 MMA의 비율이 많아지면서 impedance가 감소하였으며, 폴리 비닐 알콜을 첨가하면 impedance가 증가하였다. 또한 4CMst/MMA=1, 경우 hysteresis는 ±5% RH 내외이며, 온도 의존계수는 -0.5% RH/℃이었다. 30% RH, 60% RH, 90% RH에서의 평균 저항 값은 각각 3.0×10^6Ω, 200KΩ 9KΩ이었다. The various composition of copolymers of 4-chloromethyl styrene(4-CMS5) and methyl methacrylate(MMA) were synthesized as a humidity sensitive meterial and quartenized N, N, N', N'-tetramethylethylene diamine(TMED). Impedance versus relative humidity decreased as the content of MMA in the copolymer increased. Addition of polyvinyl alcohol increased the impedance of the humidity sensor. In the case of 4-CMSt/MMA=1, the hysteresis and temperature coefficient were ±5% RH and -0.5% RH/℃. The average resistance at 30% RH, 60% RH and 90% RH are 3.0×10^6Ω, 200KΩ and 9KΩ respectively.
Phosphonium 및 ammonium염을 포함하는 가교화된 전해질 고분자를 이용한 습도센서
공명선,이칠원,박승현,배장순 단국대학교 신소재기술연구소 2002 신소재 Vol.11 No.-
Phosphonium과 ammonium염을 포함하는 고분자 습도센서의 감습재료로 vinylbenzyl tributyl phosphonium chloride(VTPC), 2-ethylhexyl acrylate(2-EHA), [2-(methacryloyoxy)ethyl]trimethyl ammonium chloride(METAC), 4-vinyl pyridine(4-VP)의 VTPC/2-EHA/METAC/4-VP=2/3/2/3 조성의 4원 공중합체를 합성하였다. 합성한 공중합체는 1,4-dichlorobutane과 가교반응을 진행하여 최종 감습액을 제조하였다. 감습막의 전극과의 접착성 향상을 위하여 3-[(2-aminoethyl(aminopropyl)] trimethoxysilane로 표면처리된 금/알루미나 전극에 침적법으로 도포한 후, 열가교 반응을 통하여 고분자막 저항형 습도센서를 제작하였다. 실험결과 습도센서는 30%RH, 60%RH 그리고 90%RH에서 평균 저항값이 각각 971 ㏀ 132㏀ 그리고 12.6㏀로 나타났다. 또한 히스테리시스는 ±2%RH 안에서 나타났으며, 응답속도는 30%RH에서 90%RH로 변화시 75초이며 수중에 2시간 침적 후 저항변화는 ±0.5%RH 이내에서 존재하였다. The four-component copolymers of vinylbenzyl tributyl phosphonium chloride (VTPC), 2-ethylhexyl acrylate (2-EHA), [2-(methacryloyoxy)ethyl]trimethyl ammonium chloride (METAC) and 40vinyl pyridine (4-VP) was synthesized as a humidity sensitive material. The humidity-sensitive membrane was composed of copolymer VTPC/2-EHA/METAC/4-VP=2/3/2/3. The electrode and substrate were treated with 3-(2-aminothyl(aminopropyl(trimethoxysilance for improving the adherence to the alumina substrate. The final humidity membrane was formed using crosslinking reaction with 1,4-dichlorobutane after dip-coating on the electrode. The average resistance at 30%RH, 60%RH and 90%RH are 971 ㏀, 132 ㏀ and 12.6 ㏀, respectively. The hysteresis exist within ±2%RH and the response time between 30 and 90%RH. The water resistance falls within ±0.5%RH after immersing in water for 2 hr.