http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
고철호,송현수,윤존도,곽재표 경남대학교 신소재연구소 2002 신소재연구 Vol.14 No.-
폐불가사리를 이용하여 고순도의 산화칼슘, 인산일수소 칼슘(DCPD, DCPA)과 파이로인산 칼슘(CPP) 등의 칼슘제제를 제조하였으며, 제조된 인산일수소 칼슘(DCPA)은 순도가 96.8%, 입도가 5.5㎛, 비표면적이 10.3㎡/g이었으며, 94%의 백색도를 가지는 양질의 분말인 것으로 평가되었다. 또한 DCPA를 하소하여 제조한 파이로인산 칼슘(CPP, Ca_2P_2O_7)의 순도는 97.9%, 입도가 4.4㎛, 비표면적인 1.5㎡/g이었으며, 백색도는 98%, pH는 7.0±0.2이었다. Calcium Oxide(CaO), Dicalcium Phosphates Dihydrate(DCPD), Dicalcium Phosphates Anhydrate(DCPA) and Calcium Pyrophosphates(CPP) of High purity were prepared from starfish by heat treatment and chemical reaction. It was characterized that Dicalcium Phosphates Anhydrate(DCPA) was the purity of 96.8%, the particle sized of 5.5㎛, specific surface area of 10.3㎡/g and standard of white color of 94%. It was characterized that Calcium Pyrophosphates(CPP) prepared from Dicalcium Phosphates Anhydrate(DCPA) was the purity of 97.9%, the particle size of 4.4㎛, the specific surface area of 1.5㎡/g, standard of white color of 98% and 7.0±0.2pH.
고철호,김봉섭,윤존도,김광호,Go, Cheolho,Kim, Bongseob,Yun, Jondo,Kim, Kwangho 한국세라믹학회 2005 한국세라믹학회지 Vol.42 No.5
Silicon nitride coating films with various ratios of nitrogen to silicon contents were prepared and characterized. The film was coated on silicon substrate by sputtering method with changing nitrogen gas flow rate in a chamber. The nitrogen to silicon ratio was found to have values in a range from 0 to 1.4. Coated film was characterized with scanning electron microscopy, transmission electron microscopy, electron probe microanalysis, nanoindentation scanning probe microscopy, x-ray photon spectrometry, and Raman spectrometry. Silicon nitride phase in all samples showed amorphous nature regardless of N/Si ratio. When N/Si ratio was 1.25, hardness and elastic modulus of silicon nitride film showed maximum with 22 GPa and 210 GPa, respectively. Those values decreased, when N/Si ratio was higher than 1.25. Raman spectrum showed that no silicon phase exist in the film. XPS result showed that the silicon-nitrogen bond was dominant way for atomic bonding in the film. The structure and property was explained with Random Bonding Model(RBM) which was consistent with the microstructure and chemistry analysis for the coating films.
고철호(Chul-Ho Koh),이욱세(Ouk-Seh Lee) 한국컴퓨터정보학회 2013 한국컴퓨터정보학회 학술발표논문집 Vol.21 No.1
최근 XML 문서를 활용하여 다양한 분야에서 정보를 생성하여 사용하고 있다. 이에 따라 XML문서에 대한 보안이슈가 활발히 연구되고 있다. 본 논문에서는 익명의 침입자로부터 XML 문서에 대한 보호하는 정책을 제안한다. 이 기법은 XML 문서의 중요도에 따라 Count를 두어 설정한 Count 초과시 백업서버로 파일을 복제하여 전송한 후 파일을 삭제하기 때문에 익명의 사용자로부터 중요한 XML문서를 보호할 수 있다.
운영비용을 절감하는 기업용 스마트 어플리케이션 설계 방안
고철호(Chul-Ho Koh),이욱세(Oukseh Lee) 한국컴퓨터정보학회 2013 한국컴퓨터정보학회 학술발표논문집 Vol.21 No.2
근 스마트폰 보급률이 높아짐에 따라 스마트폰을 활용한 다양한 어플리케이션들이 있다. 이러한 스마트폰 어플리케이션을 클라우드 컴퓨팅 활용하여 구현할 경우, 클라우드에서 서버를 임대하여 사용한 만큼 비용을 지불할 수 있다. 따라서 서버 과부화에 대한 서비스 가용성을 보장할 수 있으며 네트워크 및 자원 사용량을 모니터링할 수 있다. 또한, 사용한 만큼 지불하는 방식이기 때문에 운영비용에 대한 부담이 줄어들 수 있다.
산화알루미늄-탄화티타늄 세라믹복합체의 물성과 방전가공성에 미치는 탄화티타늄함유량의 영향
윤존도,고철호 경남대학교 신소재연구소 1997 論文集 Vol.9 No.-
도전성 이차상인 TiC를 10-52무게%까지 함유하는 Al₂O₃-TiC 세라믹복합체를 핫프레스로 제조하여 TiC함유량에 따른 기계적 물성과 전기전도도 및 방전가공성을 조사하였다. TiC함유량이 10무게%에서 52무게%로 증가함에 따라 비커스 경도는 1700Hv에서 2200Hv로 증가였고, 4점 꺾임강도도 380MPa에서 670MPa로 증가하였다. TiC함유량이 33무게%이상일 때 방전가공속도가 급격히 증가하는 것으로 나타났는데, 이는 이 조성에서 전기전도도가 급격히 증가하기 때문인 것으로 분석되었다. Mechanical properties, electrical conductivity and electrical discharge machinability were examined on the A1₂O₃-TiC ceramic composite with varing amount of conductive TiC content. With increasing TiC content from 10wt% to 52wt%. Vickers hardness increased from 1700Hv to 2200Hv. and four-point bending strength increased from 380MPa to 670MPa. At about 33wt% or higher TiC content, electrical conductivity abruptly increased from the value less than 5×10_{-5}(Ωcm)_{-1} to the value higher than 2×l0²(Ωcm)^{-1}. and materials removal rate(MRR) abruptly increased, too.
방환철,고철호,임동원,김봉섭,최태현,윤존도 한국세라믹학회 2000 한국세라믹학회지 Vol.37 No.5
Dense composites of titanium matrix and Al2O3 matrix with reinforcements of carbon or titanium carbide fibers were successfully fabricated by high-pressure self-combustion sintering method or combustion reacton under 30 MPa of uniaxial pressure with an aid of external heating in vaccum. It was found that the fibers were uniformly distributed in the matrix, and aligned in a phase perpendicular to the pressure axis. As a moel ratio of Ti/C or reaction time increased, the density of Ti-matrix composite increased Micro pores around fibers could be removed by using clean carbon fibers without sizing agent on their surface. The evolution of carbide fibers from carbon fibers was observed. The composition of the various phases around fibers were analyzed.
산화알루미늄-탄화티타늄(Al₂O₃-TiC) 세라믹 복합체의 방전가공
왕덕현,우정윤,윤존도,고철호,안영철,정영습 경남대학교 신소재연구소 1996 論文集 Vol.7 No.-
도전성 탄화티타늄 33무게%를 포함하는 산화알루미늄基 세라믹 복합체에 대한 방전가공을 시도하고 최적조건과 방전메카니즘을 조사하였다. 방전조건으로 전류 7-15A, 듀티팩터 0.24-0.45, 인가전압 40V를 사용하여 방전가공을 실시하였는데, 전류가 7A이하, 듀티팩터가 0.30이하일 때 가공이 잘 되었으며, 그 이상에서는 표면 파괴가 일어났다. 방전전류와 듀티팩터가 증가하면 공작물 제거속도는 증가하나 표면 거칠기도 역시 증가하는 것으로 나타났다. 방전가공 표면에 대한 미세구조 분석을 통하여 방전가공 메카니즘은 용융증발기구로 분석이 되었다. Alumina ceramic matrix composite containing electro-conductive titanium carbide of 33 weight % was machined by electrical discharge machining (EDM) method. The machining condition was 7-15A of current, 0.24-0.45 of duty factor, and 40V of applied voltage. When the current and duty factor were 7A and 0.30 or lower, respectively. the specimen were machined successfully. When the current and duty factor were higher. the specimen showed surface damage and fracture after machining. As the current and duty factor increased. the material removal rate(MRR) and maximum surface roughness increased. implying that the machining condition would be selected according to the requirement whether high speed machining or good surface finish is needed. By the microstructure analysis on the machined surface, the mechanism of machining was determined to be melting and evaporation.