RISS 학술연구정보서비스

검색
다국어 입력

http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.

변환된 중국어를 복사하여 사용하시면 됩니다.

예시)
  • 中文 을 입력하시려면 zhongwen을 입력하시고 space를누르시면됩니다.
  • 北京 을 입력하시려면 beijing을 입력하시고 space를 누르시면 됩니다.
닫기
    인기검색어 순위 펼치기

    RISS 인기검색어

      검색결과 좁혀 보기

      선택해제
      • 좁혀본 항목 보기순서

        • 원문유무
        • 원문제공처
          펼치기
        • 등재정보
        • 학술지명
          펼치기
        • 주제분류
        • 발행연도
          펼치기
        • 작성언어
        • 저자
          펼치기

      오늘 본 자료

      • 오늘 본 자료가 없습니다.
      더보기
      • 무료
      • 기관 내 무료
      • 유료
      • KCI등재

        최대입경, 공극률, 온도가 다공성 아스팔트 혼합물의 균열저항성 및 수분민감성에 미치는 영향

        유인균(In-Kyoon Yoo),이수형(Su-Hyung Lee),박기수(Ki-Soo Park),윤강훈(Kang-Hoon Yoon) 한국산학기술학회 2021 한국산학기술학회논문지 Vol.22 No.3

        다공성 아스팔트 포장은 혼합물 속에 포함된 20%정도의 공극으로 인해 도로의 수막현상을 억제하여 교통사고를 줄이고 교통소음을 획기적으로 줄이는 등 다양한 순기능을 갖는다. 그러나 다공성 아스팔트 혼합물은 혼합물 속에 포함된 20% 정도의 공극 때문에 혼합물의 내구성이 취약하게 되며, 이러한 취약한 내구성이 다공성 포장의 적용을 확장하는데 제약요인이 되고 있다. 본 연구의 목적은 다공성 포장의 내구성을 향상시키기 위해 최대입경, 온도 그리고 공극률의 변화가 혼합물의 균열저항성 및 수분민감성 등 혼합물의 내구성에 미치는 영향을 평가하는 것이다. 다공성 아스팔트 혼합물의 내구성을 평가하기 위해 간접인장강도를 균열저항성 및 수분민감성의 척도로 설정하였다. 공극률이 20%로 동일하고 최대입경이 13mm, 10mm, 8mm인 혼합물에 대하여 상온과 동결융해를 경험한 시료에 대하여 간접인장강도 시험을 실시하였다. 그리고 최대입경 10mm인 동일한 재료로 공극이 20%와 22%인 혼합물에 대하여 동일한 시험을 실시하였다. 실험결과 공극률은 20%로 동일하고 최대입경의 변화와 온도의 변화에 유의한 차이를 보이는 것으로 나타났다. 특히 실험온도에 대해서는 상온과 저온에서 유의한 차이를 보였다. 최대입경의 변화에 대해서는 상온에서 8mm보다 13mm가 분명히 높은 강도를 보이고 저온에서는 유의한 차이를 보이지 않았다. 그리고 공극률과 온도의 변화에 대한 실험에서는 온도에 대해서는 유의한 차이를 보였지만 20%와 22% 사이의 2% 공극 차이는 내구성에 유의한 차이를 보이지 못했으며 서로간의 교호작용도 없는 것으로 나타났다. 앞으로 다공성 아스팔트 혼합물의 내구성에 미치는 요소들의 정량적인 평가를 통해 보다 내구성 있는 다공성 아스팔트포장을 개발해 나갈 필요가 있다. Porous asphalt pavement (PAP) has many functions, such as reducing accidents and decreasing noise. On the other hand, vulnerability is inevitable because PAP contains approximately 20% porosity. This study evaluated the effects of the maximum aggregate size (MAS), temperature, and porosity on the PAP durability. The indirect tensile strength measures durability. This study tested the samples that stayed dry and were moisturized by freezing and thawing for mixtures having the same porosity of 20% and MAS of 13mm, 10mm, and 8mm. The same test was performed on a mixture of 20% and 22% voids made of the same material with a MAS of 10mm. As a result, for 20% porosity, significant differences in the changes in MAS and temperature were found. A clear difference was observed between 8mm and 13mm under dry conditions, but there were no other significant differences in the MAS change. Furthermore, there was a clear difference in temperature for the change in porosity and temperature, but the gap in 2% porosity at 20% did not show a clear difference. Therefore, it is necessary to develop a more durable PAP through quantitative evaluations of the factors affecting the PAP durability.

      • KCI등재

        폐플라스틱 석분이 아스팔트혼합물의 안정도와 흐름치에 미치는 영향

        유인균(In-Kyoon Yoo),이수형(Su-Hyung Lee) 한국산학기술학회 2021 한국산학기술학회논문지 Vol.22 No.8

        폐플라스틱은 이미 심각한 환경문제를 야기하고 있으며 코로나19로 그 심각성은 더욱 커지고 있다. 폐플라스틱을 재활용하는 방법 중에서 도로포장의 건설재료로 사용하는 방법이 다양하게 시도되고 있으나 활용률은 높지 않은 편이다. 본 연구에서는 고급 아스팔트 혼합물의 생산에 필요한 석분을 폐플라스틱 분말로 대체하기 위한 연구를 수행하였다. 이 연구를 위하여 동일한 아스팔트 바인더와 골재를 사용하고 석분만 골재석분과 폐플라스틱 석분으로 대체한 아스팔트 혼합물을 제작하여 아스팔트혼합물의 기초적인 물성을 평가하는 마샬안정도와 흐름치 시험을 수행하였다. 시험결과, 폐플라스틱을 석분으로 사용한 아스팔트혼합물은 일반 아스팔트혼합물에 비해 역학적인 강도를 나타내는 마샬안정도에서 동등한 정도의 강도를 발현하는 것을 확인하였다. 평균값에서는 근소한 차이가 나타났지만 95%신뢰도에서 이 두 그룹은 서로 다른 강도를 나타낸다고 말할 수 없음을 확인하였다. 또한 변형과 관계된 흐름시험결과는 일반 아스팔트혼합물보다 폐플라스틱 석분 아스팔트 혼합물이 더 크게 나타났다. 그러나 이것은 일반 아스팔트혼합물의 특성에서 나타나는 허용치 범위 내에 있기 때문에 문제가 되지는 않는다. 이렇게 흐름치가 일반 아스팔트보다 허용 범위 내에서 크게 나오는 것은 도로포장의 승차감을 향상시킬 수 있고 겨울철 동결에 파손을 지연시킬 수 있다는 장점이 될 수 있다. Waste plastics (WP) is already a serious problem worldwide, and it became more significant an issue due to the spread of Covid-19. Among the various methods of recycling WP, some of them have tried to use WP for laying pavements, but the amount of utilization of WP is not high in this application. In this study, we replace the filler used in the production asphalt mixture (AM) with the WP powder. As part of this study, Marshall stability and flow tests were performed to evaluate the AM"s properties and to prepare an AM in which the filler is replaced with WP. From the present work, it was found that the AM using WP exhibited the same level of strength in Marshall stability as compared to other conventional AMs. Although there was a slight difference in the mean strength, it was evaluated that these two groups could not be said to have different strengths at 95% confidence. The flow test results showed that the flow value of AM with the WP filler is greater than that of the GAM. However, this higher flow value is within the allowable range and doesn"t pose any problem . Higher flow value is also an advantage in that it can improve the riding on pavement and can delay the damage of pavement in winter.

      • KCI등재

        지오셀 보강체가 투수성포장의 구조적 지지력에 미치는 영향

        유인균(In-Kyoon Yoo) 한국산학기술학회 2021 한국산학기술학회논문지 Vol.22 No.9

        도시지역의 건물과 도로포장으로 인한 불투수 면적이 증가하여 빗물이 땅속으로 침투되지 못하고 일시에 배출되어 도시홍수가 증가하고 지하수가 함양되지 못해 도시하천의 건천화가 심화되는 문제가 반복되고 있다. 이러한 문제를 해결하기 위해 저영향개발을 지향하면서 투수성포장을 권장하고 있으나 지지력에 대한 우려 때문에 많이 적용되지 못하고 있다. 본 연구는 투수성포장의 지지력을 향상시키기 위하여 제작된 지오셀 투수성보강체의 지지력 보강효과를 확인하고자 수행되었다. 이를 위해 콘크리트 격벽으로 분리된 두 개의 시험포장구간에 각각 일반 투수성포장과 보강 투수성포장을 시공하였다. 일반 투수성포장은 투수성표층 5㎝, 골재기층 30㎝, 보조기층 50㎝를 설치하고, 기층과 보조기층 사이에 5㎝의 모래층을 설치하였다. 보강 투수성포장은 일반 투수성포장과 모두 동일하고 골재기층 10㎝를 지오셀 보강층 10㎝로 대체하여 구성하였다. 그리고 시험포장의 포화상태는 인공강우장치를 이용하여 충분한 포화상태를 재현하여 건조상태와 습윤상태에서의 지지력을 측정하였다. 각 포장에 대한 지지력의 측정은 지반공학에서 많이 사용하는 평판재하시험(Plate Loading Test)을 각각 2회 수행하였다. 지지력 측정결과 일반포장과 투수성포장 모두 건조상태보다 습윤상태에서 지지력이 저하되는 것을 확인하였다. 또한 습윤상태에 있는 보강 투수성포장의 지지력이 건조상태에 있는 일반 투수성포장의 지지력보다도 작지 않음을 확인하였다. 즉, 투수성보강체를 사용할 경우 투수성포장 속으로 빗물이 침투되더라도 같은 두께의 일반포장과 같은 지지력을 확보할 수 있음을 확인하였다. As the impervious area in urban regions increases, urban flooding also increases because of rainwater discharges at once and the repeated dryness of urban rivers. Permeable pavements (PP) are recommended to solve this impervious problem, but they are not widely used due to concerns about their bearing capacity (BC). Therefore, this study was conducted to confirm the effect of inclusion of a geocell composite (GC) into the pavements. For this purpose, a general porous pavement (GPP) and a reinforced PP (RPP) were constructed. For the GPP, 5 ㎝ of the porous surface, 30 ㎝ of the base, and 50 ㎝ of the subbase were constructed. In RPP, 10㎝ of the base is replaced by GC of 10 ㎝, and the others features are kept the same as GPP. BC in the dry and wet states was measured by the Plate Loading Test twice on each sample. It was confirmed that both GPP and RPP had lower BC in the wet state (WS) than in the dry state (DS). Moreover, we found that the BC of RPP in WS was not smaller than the BC of GPP in DS. It means that when GC is used, even if rainwater penetrates the RPP, it can possess the same BC as a GPP in DS.

      • KCI등재

        Analysis of Noise Characteristics of Double and Single-layered Porous Pavement with CPX Method -National Route 1, Sejong-Si Section-

        In-Kyoon Yoo(유인균),Su-Hyung Lee(이수형),Dae-Seok Han(한대석) 한국산학기술학회 2020 한국산학기술학회논문지 Vol.21 No.10

        도로교통 소음은 주요 민원의 대상이 되고 있다. 다공성 포장은 도로교통 소음에 효과적인 방안으로 제안되었지만 정량적인 평가의 부족으로 인해 많이 적용되지는 않았다. 본 연구에서는 단층 다공성 포장과 복층 다공성 포장의 소음저감 성능을 평가하였다. 소음은 CPX 방법으로 측정되었으며, 주행 속도는 50km/h부터 80km/h까지 10km/h마다 측정하였다. 분석을 통해 복층 다공성 포장과 단층 다공성 포장의 소음 수준은 통계적으로 유의한 차이를 나타내었다. 도로포장 소음수준은 포장 유형에 관계없이 주행 속도에 비례했으며, 주행 속도는 두 포장의 소음 차이에 통계적으로 유의한 영향을 미치지 않는 것으로 나타났다. 복층 다공성 포장은 단층 다공성 포장에 비해 평균 6.6dB (A), 95% 신뢰수준에서 6.3dB(A) 감소하는 것으로 나타났다. 도로교통 소음을 5dB(A) 저감한다는 것은 교통량을 1/3로 줄이거나 차량의 속도를 1/2로 낮추는 것에 상당한다. 감각적으로도 3dB(A)의 차이에서 변화의 인지가 가능하고 5dB(A)의 차이에서는 명확한 변화인지가 가능하다. 일반포장에 비해 3dB(A)의 교통소음을 저감하는 단층 다공성 포장보다도 6dB(A)이상을 추가로 저감하는 복층 다공성 포장은 교통소음 저감에 매우 효과적인 공법이다. Road traffic noise is a major complaint. Porous pavement (PP) has been proposed as an effective method for reducing road traffic noise, but it has not been applied much due to the lack of quantitative evaluation. In this study, the noise reduction of single-layer porous pavement (SLPP) and double-layer porous pavement (DLPP) was evaluated. The noise was measured using the CPX method, and the driving speed was measured every 10km/h from 50km/h to 80km/h. The differences in noise level between the two PPs were statistically significant. The driving speed had no significant effect on the difference in noise between the two PPs. The DLPP showed a 6.6dB(A) reduction in average and a 6.3dB(A) reduction at the 95% confidence level compared to the SLPP. Reducing noise by 5dB(A) is equivalent to reducing traffic to 1/3 or lowering the vehicle"s speed to 1/2. Sensitively, it is possible to recognize a 3dB(A) and 5dB(A) difference. The DLPP and SLPP were very effective in reducing traffic noise.

      • KCI등재

        Analysis of Traffic Noise for Single and Double Layered Porous Pavement with SPB Method -National Route 1, Sejong-Si Section-

        In-Kyoon Yoo(유인균),Su-Hyung Lee(이수형),Dae-Seok Han(한대석) 한국산학기술학회 2020 한국산학기술학회논문지 Vol.21 No.9

        최근 도로 교통소음 대책으로 다공성포장이 새로운 대안으로 주목받고 있다. 다공성포장은 아스팔트 혼합물 속에 세립자의 비율을 줄여서 여러 개의 공극을 형성하게 하는 포장을 말한다. 이 공극으로 물이 배수되게 하여 교통사고를 줄이고 타이어 노면의 마찰 소음을 줄여주는 역할을 하게 된다. 저소음포장이 일반적으로 활발히 적용되기 위해서는 소음저감 효과에 대한 많은 검증이 필요하다. 본 연구에서는 단층 저소음포장과 복층 저소음포장의 소음저감 효과를 분석하기 위해서 수행되었다. 먼저 단틍 저소음포장과 복층 저소음포장이 시공되어 있는 세종구간을 선정하고 도로변에서 도로교통 소음을 측정하는 방식인 SPB방법으로 교통소음을 측정하였다. 교통영향요소로는 교통량, 속도 그리고 중차량 혼입률을 측정하였다. 측정결과, 복층저소음포장이 단층저소음포장보다 평균 7.95dB(A) 작게 평가되었다. 95% 신뢰도 수준에서는 7.57dB(A) 작게 평가되었다. 도로교통 소음에 미치는 영향요소로는 속도나 대형차 혼입률 보다는 교통량이 가장 크게 영향을 미쳤다. 교통량이 증가할수록 소음은 모두 증가했지만 두 포장 사이의 소음차이는 점차 감소하였다. 도로교통소음에 영향을 미치는 요소로는 교통요소보다 도로포장의 차이가 가장 크게 나타났다. 본 연구를 통해서 도로교통 소음을 줄이기 위한 대책으로 교통속도를 줄이거나 중차량의 통행을 제한하거나 교통량을 줄이는 것보다 도로포장을 바꾸는 것이 가장 효과적인 방법임을 알았다. 이를 검증하고 정량화하기 위한 광범위한 연구가 필요하다. Porous pavement (PP) has attracted attention as a new alternative measure against road traffic noise. PP refers to pavement that reduces the fines in the asphalt mixture to form voids. These voids can reduce traffic accidents and friction noise. For active application, verification of the noise reduction effect is required. In this study, the noise reduction of single-layer PP(SLPP) and double layer PP(DLPP) was analyzed. First, the Sejong section was selected, and traffic noise was measured using the SPB method on the roadside. The traffic volume, speed, and mixing ratio of large vehicles were measured. As a result, the DLPP was evaluated to be 7.95 dB(A) smaller on average and 7.57dB(A) smaller at the 95% reliability level than the SLPP. The traffic volume was more influential than the speed and the mixing rate of large vehicles. As the traffic volume increased, the noise increased, but the difference in noise between the two pavements decreased gradually. The results showed that the most effective way to reduce road traffic noise is to change the road pavement rather than reduce traffic speed, restrict traffic for heavy vehicles, or reduce traffic volume.

      • KCI등재

        최대입경, 공극률, 그리고 온도가 다공성 아스팔트 혼합물의 내구성에 미치는 영향분석

        유인균(In-Kyoon Yoo),이수형(Su-Hyung Lee),박기수(Ki-Soo Park) 한국산학기술학회 2020 한국산학기술학회논문지 Vol.21 No.12

        다공성 아스팔트 혼합물을 이용한 도로포장은 수막현상의 저감으로 교통사고가 줄고 교통소음을 획기적으로 줄이는 등 다양한 기능을 갖기 때문에 수요는 점점 늘어가고 있다. 그러나 다공성 아스팔트 혼합물은 혼합물 속에 20%정도의 공극을 포함하고 있기 때문에 골재의 탈리 등 내구성에 대한 우려 때문에 적용이 지연되고 있다. 따라서 다공성 아스팔트혼합물의 내구성을 증진시키기 위한 방법에 대한 연구가 필요한 상황이다. 본 연구의 목적은 다공성 아스팔트혼합물의 최대입경, 온도 그리고 공극률이 혼합물의 내구성에 미치는 영향을 평가하는 것이다. 이를 위해 다공성 아스팔트혼합물의 내구성 척도를 칸타브로 손실률로 설정하고 공극률이 20%로 동일하고 최대입경이 13mm, 10mm, 8mm인 혼합물에 대하여 상온과 저온에서 칸타브로 시험을 실시하였다. 그리고 최대입경 10mm인 동일한 재료로 공극이 20%와 22%인 혼합물에 대하여 칸타브로 시험을 실시하였다. 실험결과 공극률은 20%로 동일하고 최대입경의 변화가 있는 경우 내구성의 척도인 칸타브로 손실률에서는 차이를 보이지 않았다. 그러나 실험온도에 대해서는 상온과 저온에서 분명한 차이를 보였다. 그리고 공극률의 변화에 대해서는 20%와 22% 사이에 2% 차이 이지만 내구성에서는 분명한 차이를 보였다. 본 연구의 결과는 예상되었던 결과이기는 하지만 시험과 통계적 분석에 의해 정량적으로 제시되었다는 데 의의가 있다. 또한 앞으로 다공성 아스팔트 혼합물을 위한 고점도 아스팔트 바인더를 포함한 다공성 아스팔트 혼합물의 내구성에 미치는 요소들이 정량적으로 평가되어 내구성을 향상시켜 나가는데 기여할 것으로 판단된다. The demand for porous asphalt mixtures is increasing because it has a range of functions, such as reducing traffic accidents and traffic noise. On the other hand, its application is delayed due to concerns about durability. This study examined the effects of the maximum aggregate size, temperature, and porosity of an asphalt mixture on the durability. To this end, the durability measure was set to the Cantabro loss rate. Mixtures having the same porosity of 20% and the maximum aggregate diameters of 13 mm, 10 mm, and 8 mm were tested at 20℃ and -20℃. Mixtures containing 20% and 22% voids with the same material having the same diameter were tested. With 20% porosity, there was no significant difference in durability when there was a change in the maximum aggregate size. There was a significant difference between 20℃and -20℃, but no significant difference in durability when there was a 2% difference between 20% and 22%. The significance of this study is that the durability was presented quantitatively by tests and statistical analysis. This research will help improve the durability of porous asphalt mixtures by evaluating the factors affecting the durability quantitatively.

      • SCIESCOPUSKCI등재

        Fingerprinting Analysis of Fresh Ginseng Roots of Different Ages Using $^1H-NMR$ Spectroscopy and Principal Components Analysis

        Shin, Yoo-Soo,Bang, Kyong-Hwan,In, Dong-Soo,Kim, Ok-Tae,Hyun, Dong-Yoon,Ahn, In-Ok,Ku, Bon-Cho,Kim, Suk-Weon,Seong, Nak-Sul,Cha, Seon-Woo,Lee, Dong-Ho,Choi, Hyung-Kyoon 대한약학회 2007 Archives of Pharmacal Research Vol.30 No.12

        Fingerprinting analysis of fresh ginseng according to root age was performed using $^1H-NMR$ spectroscopy and multivariate analysis techniques. Various peaks were detected in the aliphatic (0-3 ppm), sugar (3-6 ppm), and aromatic (6-9 ppm) regions of the $^1H-NMR$ spectra of the water extracts of fresh ginseng root. The use of principal components (PCs) analysis (PCA) for metabolomic profiling allowed the large $^1H-NMR$ data set obtained for various metabolites to be reduced to PC1, PC2, and PC3. Two dimensional score plots showed clear separations with these three components at different roots ages, and explained 89.6% of the total variance. Canonical discriminant analysis identified the ginseng roots at various ages from the NMR results with over 89.9% discrimination accuracy. These results indicate that the combination of $^1H-NMR$ and PCA provides a very promising tool for the authentication and quality control of fresh ginseng roots at different ages.

      • KCI등재

        일반 아스팔트포장의 타이어/노면 소음 특성

        유인균(In-Kyoon Yoo),이수형(Su-Hyung Lee),한대석(Dae-Seok Han) 한국산학기술학회 2021 한국산학기술학회논문지 Vol.22 No.4

        도로교통 소음문제가 이슈가 되면서 저소음포장이 등장하게 되었고 저소음포장의 소음저감효과를 설명하면서 일반 포장과의 소음차이를 많이 사용한다. 그러나 일반포장도 포장의 종류에 따라 공용연수에 따라 타이어노면 소음은 달라진다. 본 연구에서는 저소음포장의 소음저감 효과를 평가할 때 사용할 수 있는 일반 아스팔트포장의 타이어 소음의 속도별, 공용연수별 대푯값을 평가하는 것이다. 조사방법으로는 국도의 전체 포장을 관리하고 있는 국도포장관리시스템의 데이터베이스에서 수도권 지역의 49개 구간을 선정하고 근접소음 측정방법(CPX; Close Proximity Method)으로 50㎞/h부터 80㎞/h까지 10㎞/h단위로 측정하였다. 측정결과 시공직후의 소음특성은 1년 이상 경과한 소음특성과 달라 별도로 처리하였으며 이상치 자료를 제거하면 공용연수가 증가함에 따라 소음이 증가하는 경향을 얻을 수 있었다. 또한 속도별 연도별 소음증가 수준은 모든 소음수준에서 신뢰성 있는 경향을 얻을 수 있었다. 공용연수와 주행속도에 관한 두 가지 회귀분석을 통해 일반 아스팔트포장의 공용연수별 속도별 대표 소음값을 얻었다. 이 결과로부터 일반 아스팔트포장에서 공사초기와 시공후 6년이 경과한 아스팔트포장은 평균 6㏈정도 차이가 나는 것으로 나타났다. 일반 아스팔트포장의 대표 소음값은 불변하는 것이 아니라 저소음포장과의 상대적인 비교를 위해서 필요한 것이다. 이러한 일반 아스팔트포장의 대표 소음값을 기준으로 일반 아스팔트포장에 대한 포장종류별 타이어 노면 소음특성에 대한 연구도 필요하다. As road noise became an issue, low-noise pavement (LNP) has emerged. The noise difference from general asphalt pavement (GAP) is a measure to explain the noise reduction of LNP. On the other hand, even for GAP, noise varies with the performance years (PY) and pavement condition. This study evaluated the representative noise value (RNV) by the speed and PY of GAP. Sections of 49selected from the National Road Pavement Management System, and the noise was measured at speeds from 50㎞/h to 80㎞/h at every 10㎞/h using the Close Proximity Method (CPX). Because the noise immediately after construction differed from the other, it was treated separately, and some outliers were removed. The noise increased with increasing PY. In addition, the noise increase by speed showed a reliable trend at all noise levels. The RNV for each speed and PY was obtained through analyses of the PY and speed. The average noise difference between the initial construction and the six-year-paced pavement was approximately 6㏈. When evaluating the noise reduction of LNP, it is necessary to use RNV rather than the noise of old pavement. The RNV of GAP is necessary for a relative comparison with LNP and studying the road noise characteristics for each GAP type.

      • KCI등재

        지오셀로 보강된 투수성 아스팔트포장의 홍수저감성능 평가

        유인균(In-Kyoon Yoo) 한국산학기술학회 2021 한국산학기술학회논문지 Vol.22 No.12

        도시지역의 불투수 면적이 증가하여 빗물이 침투되지 못하고 일시에 배출되어 도시홍수가 증가하고 하천의 건천화가 심화되는 문제가 반복되고 있다. 이러한 문제를 해결하기 위해 저영향개발을 지향하면서 투수성포장을 권장하고 있으나 수문학적인 실증자료가 없어 많이 적용되지 못하고 있다. 본 연구는 투수성포장의 지지력을 향상시키기 위하여 제작된 지오셀 투수성보강체를 적용한 투구성포장체의 수문성능을 평가하기 위해서 수행되었다. 이를 위해 콘크리트 격벽으로 분리된 시험포장구간에 투수성포장을 시공하고 기존의 일반 불투수성포장의 수문성능과 비교하였다. 투수성포장은 투수성 표층 5cm, 지오셀 보강층 10cm, 골재기층 20cm, 보조기층 50cm를 설치하고, 기층과 보조기층 사이에 5cm의 모래층을 설치하였다. 강우모사시험을 통해 얻은 지오셀 투수성포장의 수문성능은 다음과 같다. 첫째, 지오셀 투수성포장은 큰 강우강도에서 첨두유량의 저감효과가 더 크게 나타났다. 강우강도가 가장 강한 105mm/hr의 강우에서 불투수성포장과 투수성포장의 첨두유량 차이가 25%정도 나타났다. 그리고 145mm/2hr와 175mm/3hr의 강도에서는 첨두유량의 차이가 거의 나타나지 않았다. 둘째, 지오셀 투수성포장은 첨두유량에 이르는 시간을 지체시켜 주는 것으로 나타났다. 불투수성포장에서는 모두 약 10분이었으나 투수성포장에서는 105mm/hr의 강도에서는 25분, 145mm/2hr의 강도에서는 35분 그리고 175mm/3hr의 강도에서는 48분으로 첨두유량에 이르는 시간이 지체되는 것으로 나타났다. 셋째, 일반 불투수포장은 강우가 멈추면 바로 유출이 멈추는 반면 지오셀로 보강된 투수성포장은 강우가 멈춰도 지속적으로 유출이 일어나는 것으로 나타났다. 강우 중단 후의 유출양상은 강우강도에 상관없이 유사한 것으로 나타났다. When the impervious area of a pavement increases, rainwater cannot penetrate and discharge. Hence, permeable pavements emerged as a solution to this problem, but their hydrological data is not available at present. Hence, this study evaluates the hydrological performance of the geocell composite-reinforced permeable pavement. This technology of the permeable pavement is patented and improves the structural capability of the permeable pavement. For analysis, this study considered a geocell permeable pavement (GPP) and an impervious pavement to study their hydrological performance. The GPP consists of a surface layer of thickness 5 cm, a geocell composite layer of thickness 10 cm, and an aggregate layer of thickness 70 cm. The hydrological performance of GPP obtained through the rainfall simulation test is as follows. First, the GPP showed a high reduction effect of 25% of peak flow at a heavy rainfall intensity of 105 mm/hr. On the other hand, there was little difference in the peak flow at other rainfall intensities. Second, the GPP delays the time to reach the peak flow. For example, the impervious pavement takes about 10 minutes to reach the peak flow, but the GPP needs 25, 35, and 48 minutes, respectively, at different rainfall intensities. Third, the general impervious pavement stopped the runoff as soon as the rain had stopped, whereas the GPP continued to seep out even after the rain had stopped. Finally, the runoff pattern after the rain had stopped was similar between the two pavement types regardless of the rainfall intensity.

      연관 검색어 추천

      이 검색어로 많이 본 자료

      활용도 높은 자료

      해외이동버튼