http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Jian Xu,Liyang Zhou,Ke Hu,Yanfeng Li,Xiangang Zhou,Songhe Wang 대한토목학회 2022 KSCE JOURNAL OF CIVIL ENGINEERING Vol.26 No.5
In this study, the influence of wet-dry cycles on the uniaxial compression behavior of fissured loess after vibration was investigated by small shaking table tests, wet-dry tests, and uniaxial compression tests. Results show that the initial elastic modulus and peak strength both decline after wet-dry cycles while the morphology of stress-strain curves shows insignificant changes. Except for samples with a fissure angle α = 45°, where the bimodal stress-strain curves were observed, all show softening trend. The failure mode can be classified into four main types: fracture failure (α = 0° and 15°), slip-fracture coupled failure (α = 45°), slip failure (α = 60°), and compression shear failure (α = 30° and 90°). The failure modes of samples at α = 0°, 15°, 45°, and 60° are independent of wet-dry cycles but strongly depend on fissure angle, while those at the other fissure angles are more susceptible to wet-dry cycles. The uniaxial compressive strength (UCS) of fissured loess samples before vibration are greater than those after vibration. The relationship between UCS and fissure angle before and after vibration show double-valley pattern. A binary medium model for fissured loess considering vibration and wet-dry cycles was constructed, which was verified by test data.