http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Balakrishnan, G,Thirumurugesan, R,Mohandas, E,Sastikumar, D,Kuppusami, P,Songl, J I American Scientific Publishers 2014 Journal of nanoscience and nanotechnology Vol.14 No.10
<P>Aluminium oxide (Al2O3) thin films were deposited on Si (100) substrates at an optimized oxygen partial pressure of 3 x 10(-3) mbar at room temperature by pulsed laser deposition (PLD). The films were characterized by high temperature X-ray diffraction (HTXRD), field emission scanning electron microscopy (FESEM) and atomic force microscopy (AFM). The HTXRD pattern showed the cubic y-Al2O3 phase in the temperature range 300-973 K. At temperatures 1073 K, the δ and θ-phases of Al2O3 were observed. The mean linear thermal expansion coefficient and volume thermal expansion coefficient of γ-Al2O3 was found to be 12.66 x 10(-6) K(-1) and 38.87 x 10(-6) K(-1) in the temperature range 300 K-1073 K. The field emission scanning electron microscopy revealed a smooth and structureless morphology of the films deposited on Si (100). The atomic force microscopy study indicated the increased crystallinity and surface roughness of the films after annealing at high temperature.</P>
Singh Akash,Thirumurugesan R.,Krishnakumar S.,Rani Revati,Chandramouli S.,Parameswaran P.,Mythili R. 한국원자력학회 2023 Nuclear Engineering and Technology Vol.55 No.4
Enhancement of wear resistance of components used in fast reactors is necessary for long service life of the components. Plasma nitriding is a promising surface modification technology to impart high hardness and improved wear resistance of various steel components. This study discusses the characterization of chrome nitrided SS316L casing ring used in secondary sodium pump of fast breeder reactor and its stability under long term sodium exposure. Microstructural and hardness analysis showed that stress relieved component could be chrome nitrided successfully to a thickness of about 100 μm. Assessment of in-sodium performance of the chrome nitrided casing ring subjected to long term exposure up to 5000h at 550°C, showed retention of chrome nitrided layer with a case depth almost similar to that before sodium exposure. A slight decrease in the hardness was observed due to prolonged high temperature sodium exposure. Tribological studies indicate very low coefficient of friction indicating the retention of good wear resistance of the coating even after long term sodium exposure.
Plasma plume behavior of laser ablated cerium oxide: Effect of oxygen partial pressure
Panda, Arun Kumar,Singh, Akash,Mishra, Maneesha,Thirumurugesan, R.,Kuppusami, P.,Mohandas, E. Cambridge University Press 2014 Laser and particle beams Vol.32 No.3
<B>Abstract</B><P>This paper describes the spatial and temporal investigation of laser ablated plasma plume of cerium oxide target using Langmuir probe. Cerium oxide target was ablated using a KrF (λ ~ 248 nm) gas laser. Experimental studies confirmed that oxygen partial pressure of 2 × 10<SUP>−2</SUP> mbar is sufficient enough to get good quality films of cerium oxide. At this pressure, plume was diagnosed for their spatial and temporal behavior. Spatial distribution was investigated at a distance of 15 mm, 30 mm, and up to a maximum distance of 45 mm from the target, whereas temporal behavior has been recorded in the range of 0 to 50 µS with an interval of 0.5 µS. The average electron densities are found to be maximum at 30 mm from the target position and the plasma current of the laser ablated ceria is found to be maximum at 22 µS.</P>