http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
스마트건설에서 측량이 생산성 향상에 미치는 영향에 관한 실증연구(도로 토공사 중심으로)
오윤석(Oh, Yoon Seuk),권영삼(Kwon, Young Sam),이재강(Lee, Jae Kang),이수득(Lee, Su Deuk) 대한공간정보학회 2020 대한공간정보학회지 Vol.28 No.4
건설현장의 안전, 인력문제, 생산성향상 등을 위해 스마트건설 기술 개발이 활발하게 진행되고 있다. 본 연구에서는 국내 최초로 260m 길이의 도로 토공사에 대해 일반적인 공사 방식과 스마트건설 공사 방식을 비교하였다. 두 방식의 조건이 완벽하게 동일하지 않아 총 작업한 토공량을 총 시간으로 나눈 분당 작업량으로 환산한 결과 스마트건설 공사 방식의 장비별 작업량은 평균 2.12㎥로 측정되었고 일반적인 공사 방식의 장비별 작업량은 평균 0.89 ㎥로 측정되어 스마트건설 공사 방식이 2.38배 향상된 것으로 계산되었다. 시공 중 측량이 전체 작업에서 차지하는 작업량의 비중이 19.4%에서 5.0%로 낮아졌으며, 특히 도저 작업에서 측량이 작업에서 차지하는 비중이 20.5% 에서 1.3%로 가장 많이 감소하였다. 또한 시공 전 준비과정에서도 측량에 소요되는 시간이 일반적인 공사 방식이 8일 소요된데 반해 스마트건설 공사 방식은 1일만 소요되었다. 향후, 스마트건설 도입에 따른 시공현장에서 측량 관련 업무의 변화는 불가피할 것이며 이를 대비할 계획수립이 필요할 시점이다 A lot of R&Ds which are related to smart construction technologies are actively progressing due to the need for improvement in construction site safety, labor shortage problems, and productivity improvement of works. In this study, for the first time in Korea, the general method and the smart construction method were compared for 260 meters long road earthworks. Since the conditions of the two methods were not completely the same, the total amount of earthwork was converted into the amount of work per minute divided by the total time and compared. As a result, the average work amount for each equipment of the smart construction method was measured at 2.12㎥ and the average work amount for each equipment of the general construction method was measured at 0.89㎥, and it was calculated that the smart construction method improved by 2.38 times. In this case, the share of surveying in the works decreased from 19.4% to 5.0% on average, and especially the share of surveying in dozer work decreased the most from 20.5% to 1.3%. Also even in the pre-construction preparation process, the time required for surveying took 8 days for the general construction method, but only one day for the smart construction method. In the future, changes in the surveying process will be unavoidable at the construction site following the introduction of smart construction, and it is time to prepare a response plan for this.
마그네틱 필드를 이용한 지중 시설물 센싱 데이터 획득 필요성에 관한 연구
오윤석(Yoon-Seuk Oh),남상관(Sang-Kwan Nam) 대한공간정보학회 2009 한국지형공간정보학회 학술대회 Vol.2009 No.9
본 논문은 지중에서는 통신이 불가능한 기존 전파를 이용한 방식의 무선통신 기술의 대안으로서 자기장 통신을 소개함으로서 Geosensor 활용이 지중에서도 가능하며, U-City 등 USN 구축이 지중 환경에서도 가능할 수 있다는 것을 설명하고자 한다. 또한 지중 환경에서 무선통신이 가능할 경우 개발할 수 있는 u-City 등과 관련한 서비스에 대해 설명하였다.
u-City 기술개발을 위한 Test Lab의 필요성 연구
오윤석(Yoon-seuk Oh),남상관(Sang-kwan Nam),최현상(Hyun-Sang Choi),류승기(Seung-ki Ryu) 대한공간정보학회 2008 한국지형공간정보학회 학술대회 Vol.2008 No.6
u-City는 우리나라에서 최초로 개념이 수립되어 현재 32개 도시에서 건설중이거나 계획되어 있다. u-City는 도시건설에 있어 첨단 IT기술을 적용함으로서 도시내의 사물과 정보가 연결됨으로서 완성될 수 있다. 이러한 환경을 구축하기 위해서는 제도가 만들어져야 하고, 기술의 표준이 이루어져야 하며, 무엇보다도 첨단 IT 기술이 도시라는 변화를 예측할 수 없는 환경에서 안정적으로 작동될 수 있어야 한다. 따라서 도시공간에서 각 사물간의 정보를 연결할 수 있으면서도 안정적인 센서와 센서네트워크를 개발을 위해서는 기술개발 단계에서 실증실험이 필요하며, 본 연구에서는 도시 지상시설물 및 지하시설물의 센서 및 센서네트워크 기술을 검증할 수 있는 Test Lab의 조건과 역할에 대하여 제시하였다.