Analysis of Piled Piers Considering Riverbed Scouring

Jeong, Sang-Seom,Suh, Jung-Ju,Won, Jin-Oh 한국지반공학회 2002 지반 : 한국지반공학회지 Vol.18 No.3

본 연구에서는 지반말뚝, 말뚝-말뚝캡, 그리고 말뚝-유체간의 상호작용 해석을 수행하여 교각세굴을 고려한 말뚝기초의 거동을 해석하였다. 지반-말뚝의 상호작용은 비선형 하중전이곡선(p-y, t-z, 그리고 q-z 곡선)을, 말뚝-말뚝캡의 상호작용에서는 군말뚝의 배열과 말뚝-말뚝캡 사이의 구속조건을 고려하였다. 말뚝유체의 상호작용은 세굴에 의한 지반의 강성 저하를 고려하여 지반-말뚝의 상호작용에 포함하여 해석하였다. 그 결과 세굴심이 깊어질수록 말뚝에 발생하는 최대 휨모멘트의 값이 증가함을 알 수 있었으며, 이를 바탕으로 세굴에 따른 군말뚝의 안정성 평가에서는 지반-말뚝 및 말뚝-말뚝캡의 상호작용을 고려한 해석을 수행하는 것이 바람직함을 알 수 있었다. This paper describes a simplified numerical procedure for analyzing the response of bridge pier foundations due to riverbed scouring. A computationally efficient algorithm to analyze the behavior of a pile group is proposed by considering soil-pile, pile-cap, and pile-fluid interactions. The complex phenomenon of the pile-soil interaction is modeled by discrete nonlinear soil springs (p-y, t-z and q-z curves). The pile-cap interaction is considered by geometric configuration of the piles in a group and connectivity conditions between piles and the cap. The pile-fluid interaction is incorporated into the procedure by reducing the stiffness of the soil-pile reactions as a result of nonlinearity and degradation of the soil stiffness with river bridge scouring. Through the numerical study, it is shown that the maximum bending moment increases with increasing scour depth. Thus it is desirable to check the stability elf pile groups based on soil-pile and pile-cap interactions by considering scouring depth in the riverbed.

Stability of Unsaturated Soil Slopes Considering Wetting Front Suction

( Sang Seom Jeong ),( Jong Min Kim ),( Jae Hong Kim ) 대한지질공학회 2007 국제학술발표회 논문집 Vol.2007 No.-

Pull-Out Behavior of a Drilled Shaft Reinforced by Soil Nails

Sung June Lee,Sang Seom Jeong,Jae Young Kim 한국지반공학회 2010 international journal of geo-engineering Vol.2 No.4

In order to understand the reinforcing effects on the pull-out resistance of a drilled shaft reinforced by soil nails. a series of pull-out was conducted on model reinforced drilled shafts with various reinforcing types of soil nails. Inclination angle, number of levels, number of soil nails per level, and longitudinal arrangement of soil nails were selected as test variables in this study. The reinforced drilled shafts were installed in dense sand to an embedded depth of 350 mm. The results obtained from this study indicated that reinforcing efficiency of soil nails was improved with an increase in inclination angle. As the inclination angle of the reinforcing soil nails decreased, reinforcing effects were severely affected by other test variables. The measured bending moments and axial forces developed along the instrumented soil nails for different inclination angles and reinforcing levels were also discussed in this paper. No obvious reinforcing effects of soil nails on the compression behavior of model reinforced piles were observed from the additional compression tests.

Three Dimensional Analysis of Piled Raft Foundation in Clay Soils

Sang Seom Jeong,Jae Yeon Cho 한국지반공학회 2012 international journal of geo-engineering Vol.4 No.1

The settlement behavior of a square piled raft in clay soil was investigated using numerical analysis. The emphasis was on quantifying the reduction of the average and differential settlements in soft and stiff clay soils. To obtain the detailed information on the piled raft, nonlinear three dimensional finite element analyses with pile-soil slip interface model were performed for various pile positions, pile numbers, pile lengths under the raft and different loading types. Based on the results obtained, design considerations concerning the settlement of piled rafts subjected to vertical loading are discussed. It is found that the variation of reduction ratio of soft clay was relatively greater than that of stiff clay, whereas the reduction ratio of soft clay was relatively smaller than that of stiff clays. It is also found that the required pile group-raft area ratio for minimizing differential settlement in soft clay was slightly larger than that of stiff clay in the same pile array.

Slip Effect at the Pile-soil Interface on Dragload

Jeong, Sang-Seom,Lee, Cheol-Ju 한국지반공학회 2003 지반 : 한국지반공학회지 Vol.19 No.3

본 연구에서는 말뚝이 근입된 연약지반의 탄소성 해석을 수행하여 말뚝에 작용하는 하향력을 산정하였다. 이때 단독말뚝과 군말뚝(3$\times$3, 5$\times$5)을 대상으로 각각 2차원과 3차원 유한요소해석을, 말뚝주면에서 slip의 유무에 따라 수행하여 그 영향정도를 파악하였다. 하향력의 발생정도는 말뚝주면에서의 마찰계수, 지표면과 말뚝두부에 작용하는 상재하중에 큰 영향을 받는다. 이와 같은 영향인자를 토대로 수치해석 결과, 하향력은 no-slip의 경우가 slip의 경우에 비해서 상당히 과대하게 산정되었으며, 또한 말뚝두부에 하중이 증가함에 따라 하향력은 감소하는 것을 알 수 있었다. 한편 그룹효과가 있는 군말뚝의 하향력은 단독말뚝의 하향력에 비해서 크게 감소 하는 것으로 나타났으며, 수치 및 사례분석을 통해 slip 해석의 적절함을 확인하였다. The dragload on pile groups in consolidating ground was investigated based on a numerical analysis. The case of a single pile and subsequently the response of groups were analyzed by 2D and 3D finite element studies. Conventional continuum elements and special slip elements were used in the analyses for comparison. Based on a limited parametric study, it is shown that dragload for a single pile and group effect are normally overestimated by continuum analyses, compared with the predictions by the slip analyses. The group effect was examined from the slip analysis by considering various factors such as pile configurations, surface loading, interface friction coefficient, and axial loading on piles. An examplary analysis and one previous experimental observation of dragload and group effects were back-analysed. The case histories demonstrated that the slip analysis might predict a better estimate of dragload and group effect compared to the no-slip continuum analysis.

The Settlement Behavior of Piled Raft Subjected to Vertical Load

Sang Seom Jeong,Jae Yeon Cho 한국지반공학회 2010 international journal of geo-engineering Vol.2 No.3

The settlement behavior of a square piled raft in clay soil was investigated using numerical analysis. The emphasis was on quantifying the reduction of the average and differential settlements in soft clay soils. To obtain the detailed information of piled raft, a nonlinear three dimensional finite element analysis with pile-soil slip interface model was performed for various pile positions, pile numbers and pile lengths under the raft. Based on the results obtained, the settlement aspects for an efficient design of piled rafts subjected to vertical loading are discussed in soft clay case.

Effects of Vertical Load on the Lateral Response of Single Pile and Pile Groups in Clay

Sang Seom Jeong,Jin Oh Won 한국지반공학회 2009 international journal of geo-engineering Vol.1 No.1

실규모 현장시험 및 유한요소해석을 통한 강관매입말뚝의 공학적 거동에 대한 연구

김정섭(Jeong-Sub Kim),정경자(Gyoung-Ja Jung),정상섬(Sang-Seom Jeong),전영진(Young-Jin Jeon),이철주(Cheol-Ju Lee) 한국지반환경공학회 2018 한국지반환경공학회논문집 Vol.19 No.4

본 연구에서는 현장에서 실규모로 시공된 8본의 강관매입말뚝의 공학적 거동을 정재하시험, 동재하시험(EOID 및 restrike 시험) 및 Class-A 및 C1 type의 수치해석을 수행하여 상세히 고찰하였다. 이를 통해 말뚝의 하중-침하, 설계지지력 및 전단응력 전이특성 등을 분석하였다. 정재하시험을 통해 평가된 설계지지력에 비해 동재하시험 및 수치해석은 이를 매우 상이하게 평가하는 것으로 분석되었으며, 이 가운데 restrike 시험이 전반적으로 최상의 결과를 도출하였고, 수치해석 결과의 신뢰성은 동재하시험에 비해 낮은 것으로 분석되었다. 각 시험에서 산정된 설계지지력을 정재하시험의 결과와 비교할 때 EOID는 정재하시험값의 20.0%-181.0%(평균: 69.3%) 의 범위를 보였고, restrike 시험의 경우 48.2%-181.1%(평균: 92.1%)의 범위를 보였다. 또한 Class-A type에서는 37.1-210.5%(평균: 121.2%)로 가장 큰 분산을 보였다. EOID 시험에서는 선단지지력이 말뚝의 전체지지력의 대부분을 차지하는데 비해, restrike 시험에서는 주면마찰력 및 선단지지력이 비슷한 정도로 발현되었다. 이때 restrike 시험에서 측정된 선단지지력은 EOID 시험에서 측정된 크기보다 작은 것으로 분석되었다. 즉 restrike 시험에서 타격에너지가 충분하지 않은 경우 말뚝의 선단지지력이 과소평가될 가능성이 있는 것으로 나타났다. 말뚝의 축력분포로부터 측정된 전단응력은 말뚝의 심도가 깊어질수록 증가하는 양상을 보였으며, 수치해석 결과는 정재하시험과는 상당한 정도의 차이를 보였다. 말뚝선단 인근에 슬라임이 존재하는 경우 말뚝의 거동에 매우 큰 영향을 주는 것으로 분석되었는데, 슬라임의 탄성계수가 작을수록 그리고 슬라임의 두께가 두꺼울수록 말뚝의 침하량이 큰 폭으로 증가하는 것을 확인하였다. In the current study, the engineering behaviour of prebored and precast steel pipe piles was examined from a series of full-scale field measurements by conducting static pile load tests, dynamic pile load tests (EOID and restrike tests) and Class-A and Class-C1 type numerical analysis. The study includes the pile load - settlement relations, allowable pile capacity and shear stress transfer mechanism. Compared to the allowable pile capacity obtained from the static pile load tests, the dynamic pile load tests and the numerical simulation showed surprisingly large variations. Overall among these the restrike tests displayed the best results, however the reliability of the predictions from the numerical analysis was lower than those estimated from the dynamic pile load tests. The allowable pile capacity obtained from the EOID tests and the restrike tests indicated 20.0%-181.0% (avg: 69.3%) and 48.2%-181.1% (avg: 92.1%) of the corresponding measured values from the static pile loading tests, respectively. Furthermore, the computed results from the Class-A type analysis showed the largest scatters (37.1%-210.5%, avg: 121.2%). In the EOID tests, a majority of the external load were carried by the end bearing pile capacity, however, similar skin friction and end bearing capacity in magnitude were mobilised in the restrike tests. The measured end bearing pile capacity from the restrike tests were smaller than was measured from the EOID tests. The present study has revealed that if the impact energy is not sufficient in a restrike test, the end bearing pile capacity most likely will be underestimated. The shear stresses computed from the numerical analysis deviated substantially from the measured pile force distributions. It can be concluded that the engineering behaviour of the pile is heavily affected if a slime layer exists near the pile tip, and that the smaller the stiffness of the slime and the thicker the slime, the greater the settlement of the pile.

현장시험과 Class-A 및 C1 type 수치해석을 통한 강관매입말뚝의 거동에 대한 연구

김성희(Sung-Hee Kim),정경자(Gyoung-Ja Jung),정상섬(Sang-Seom Jeong),전영진(Young-Jin Jeon),김정섭(Jeong-Sub Kim),이철주(Cheol-Ju Lee) 한국지반환경공학회 2017 한국지반환경공학회논문집 Vol.18 No.7

본 연구에서는 강관매입말뚝의 하중-침하 및 전단응력 전이 특성을 분석하기 위하여 시험시공 및 수치해석을 수행하였다. 동재하시험 및 정재하시험을 수행한 결과 EOID 및 Restrike 시험을 통해 평가된 말뚝의 설계지지력은 정재하시험에서 평가된 설계지지력에 비해 각각 약 56~105% 및 65~121%의 범위를 보였으며, 말뚝재하시험 이전에 수행된 Class-A type 수치해석의 경우 38~142%의 범위를 보였다. 또한 Restrike 시험에서 평가된 설계지지력은 EOID 시험의 설계지지력에 비해 12~60% 증가된 것으로 평가되었다. EOID에서는 선단지지력이 크게 측정되는 데 비해, Restrike 시험에서는 주면마찰력이 크게 측정되었는데 Restrike 시험의 타격에너지가 충분하지 않은 경우 말뚝의 선단지지력이 과소평가될 가능성이 있는 것으로 분석되었다. 본 연구의 분석에 의하면 동재하시험을 통해 말뚝의 지지력을 합리적으로 평가하기 위해서는 주면지지력은 Restrike 시험 결과를, 선단지지력은 EOID 시험결과를 적용하는 것이 합리적인 것을 알 수 있었다. 정재하시험 실측값과 수치해석으로부터 예측된 하중-침하 관계는 탄성범위까지는 어느 정도 유사하지만 항복이 발생한 이후의 거동은 크게 벗어났다. 즉 실측값은 항복 이후 경화현상이 거의 없이 마치 탄성-완전소성(elastic-perfectly plastic) 재료와 유사하게 파괴에 도달되는 반면에, 수치해석에서는 변형경화(strain hardening)과정을 거치면서 파괴에 점진적으로 도달되는 경향을 보였다. 말뚝의 하중-침하 특성은 지반의 강성에 영향을 받으며, 축력분포는 지반의 전단강도상수에 영향을 받는 것으로 나타났다. In this study, a series of full-scale field tests on prebored and precast steel pipe piles and the corresponding numerical analysis have been conducted in order to study the characteristics of pile load-settlement relations and shear stress transfer at the pile-soil interface. Dynamic pile load tests (EOID and restrike) have been performed on the piles and the estimated design pile loads from EOID and restrike tests were analysed. Class-A type numerical analyses conducted prior to the pile loading tests were 56~105%, 65~121% and 38~142% respectively of those obtained from static load tests. In addition, design loads estimated from the restrike tests indicate increases of 12~60% compared to those estimated in the EOID tests. The EOID tests show large end bearing capacity while the restrike tests demonstrate increased skin friction. When impact energy is insufficient during the restrike tests, the end bearing capacity may be underestimated. It has been found that total pile capacity would be reasonably estimated if skin friction from the restrike tests and end bearing capacity from the EOID are combined. The load-settlement relation measured from the static pile load tests and estimated from the numerical modelling is in general agreement until yielding occurs, after which results from the numerical analyses substantially deviated away from those obtained from the static load tests. The measured pile behaviour from the static load tests shows somewhat similar behaviour of perfectly-elastic plastic materials after yielding with a small increase in the pile load, while the numerical analyses demonstrates a gradual increase in the pile load associated with strain hardening approaching ultimate pile load. It has been discussed that the load-settlement relation mainly depends upon the stiffness of the ground, whilst the shear transfer mechanism depends on shear strength parameters.

단독말뚝과 군말뚝의 Downdrag

정상섬,Jeong, Sang Seom 대한토목학회 1993 대한토목학회논문집 Vol.13 No.4

이론적 해석과 수치 해석을 통하여 단독말뚝과 군말뚝에서 발생하는 downdrag 하중을 연구 검토하였다. 본 연구의 목적은 그룹 안에서 개개 말뚝들의 downdrag 하중 크기와 분포 정도를 파악하는데 있다. 따라서 단독말뚝과 군말뚝에서 발생하는 downdrag을 수치 해석하였으며 단독말뚝의 경우에 있어서는 비교적 정확한 downdrag 해석법을 제시하였다. 연구결과 그룹안의 개개 말뚝들은 단독말뚝의 경우에서 발생하는 downdrag하중보다 훨씬 작은 하중을 받는 것을 알 수 있었다. 또한 군말뚝의 간격: 직경의 비가 2.5에서 5.0까지 변하는 9-25개 군말뚝의 downdrag 하중을 고려한 설계시 추천할 수 있는 방법을 제시 하였다. The downdrag on a single pile and on pile groups was examined by using a numerical analysis and an analytical study. The overall objective of the present study was given to the magnitude and distribution of the downdrag forces on piles within a group. The case of the single pile was analyzed by developing a closed form solution. Subsequently the response of groups was investigated by using a detailed numerical approach. Based on the results, it is found that the downdrag load of piles in a group is much smaller than that of a single pile. Also, a simple method is proposed to design groups of 9 to 25 piles with spacing-to-diameter ratios varying from 2.5 to 5.0 for downdrag loads.